Search the Community
Showing results for tags 'map', 'mountains' or 'norway'.
Found 153 results
-
Hi ! I would like to talk about this card that almost no one plays! It's "DVERG Forest". It takes me on average 4 to 8 minutes to find a game, unlike all the others where you can find one in less than 2 minutes! The reason, in my opinion and supported by several friends, is too many trees to hide in and you have to constantly run everywhere and watch out for those playing in the trees! Logically we are in a forest you will tell me! What I propose would be to "cut down" part of the forest to install a sawmill with an area covered with tree trunks. What do you think?
-
Hi ! New little proposal for Vigor! Concerning the elimination but also the death match. I noticed that there was no map where we were locked in closed spaces. To change a bit from open play to focus on close or very short range combat. So I thought of 3 places that might be interesting. * The first one already available is on FISK FABRICK inside the tunnel. Just add a few trucks/containers and the area could offer some interesting frontal gameplay! * The 2nd does not exist yet and could appeal to many players, it is the interior of the big boat in ANIKKEN it would be filled with damaged containers and could even in the future become an agricultural area for transport once opened ! * The 3rd would be specific to the death match and would take place inside the KJERSTIN dam What do you think?
-
Hello New proposal to change the game! After a few minutes of play before the drop, a siren sounds signaling the arrival of a bombardment on a large red zone similar to the drop zone. All players in this area would have a warning message. This area could also why not change and become "irradiated"
-
roads need help with road testing, vehicle will not move.
jimlodolce posted a topic in Arma Reforger - Terrain Creation
was trying to test how a vehicle would drive on the roads of my map but when I place a vehicle then switch to game mode the vehicle won't move, it just sits there spinning the tires. I am very new to this all the help is very appreciated. -
PROJECT BLUFOR Project BLUFOR aims to retexture already existing models within Arma 3, along with some big mods like RHS and smaller weapon mods; with the aim to create more playable factions for different types of scenarios and terrains. Most of our work focus is around infantry, but when possible we branch out to expand factions with vehicle reskins as well. BLUFOR REVITALIZED Some people may have seen this mod before on the workshop, and this is of course an older mod. However, i have now taken over updating and adding new content. Last update before me being in 2021. CURRENT FACTIONS AND CONFIGS: THE FOLLOWING ITEMS HAVE BEEN DONE SINCE I TOOK OVER: UPCOMING: RANDOM SCREENSHOTS LINKS ETC: Steam Workshop (Main Mod) Recommendations: To make full use of Project BLUFOR we highly recommend the usage of: Task Force Arrowhead Radio: https://steamcommunity.com/sharedfiles/filedetails/?id=894678801 3CB Vehicles: https://steamcommunity.com/workshop/filedetails/?id=893349825 FAQ:
- 2 replies
-
- 2
-
-
- project blufor
- blufor
- (and 33 more)
-
How to make Eden (Everon) editable?
Meowdevmittens posted a topic in Arma Reforger - Terrain Creation
Hey, I have seen this tutorial by Jerry Hopper Arma Reforger Cinematic Timeline howto . He is saving the whole map into the modfolder to make Eden editable, but in my version the "Save world as" button is greyed out. Does anyone know a workaround? It would be just awesome to get the possibility to delete objects and changing the terrain for so many mod ideas. I don't know why BI is restricting that. Same with the texture files. Modded weapons, cars and everything else could look like it would fit perfectly in the game. Have a nice day Mittens -
Hey guys, so I am practicing at making terrains right now. I decided to start following the suggested PMC ArmA 3 Ultimate Terrain Tutorial. https://pmc.editing.wiki/doku.php?id=arma3:terrain:ultimate-terrain-tutorial I am at the Binarization step, where I get stuck and encounter a sudden error when I press the Crunch button. Have been trying a bunch of attempts at a work around but not managed to solve it yet. The logs does not show any information at all and I have not managed to google the issue. Very sure I have followed all steps successfully up until this point. My files contain config.ccp and other files, despite it saying no configs or missions found?
-
custom waypoint Request Multiple Custom Waypoint Marker (Lshft+LMB)
un c posted a topic in ARMA 3 - ADDONS & MODS: DISCUSSION
Request Multiple Custom Waypoint Marker (Lshft+LMB) -
Hello, I am a norwegian man hoping to find someone that could "help" me with creating a Arma 3 map of the city of tromsø (tromso) and the surrounding areas. I am willing to pay a decent sum of money for a good quality map, though you would need to come with a price tag as i don't really know how much it would cost to have one made. Would love to hear from those who are interested.
-
heightfield Heightfield Copy Paste Tool
KenTheNugget posted a topic in ARMA 3 - COMMUNITY MADE UTILITIES
Made a simple python script to transfer sections ASCII heightfield data between files. Although this was born out of a mess I put myself in I think a few people could find it useful. Main use cases in mind for this tool was. --Allowing easier versioning of HF data by enabling section transfers between versions. --Allowing people to work on terrain changes simultaneously. ASCII-HF-Transplanter Planning on supporting shape exports from TB down the line once I get my head around how TB handles them. -
scripting Polygon Triangulation for Map Markers
Mallen_ posted a topic in ARMA 3 - MISSION EDITING & SCRIPTING
Hey guys, So im posting this in the hopes that it can help people looking for similar solutions to shading a custom map area defined by a polygon of markers, it took a while to get working but creates a really clean effect thats easy to adapt to most situations. -
Hi guys, one friend of mine is having problems with map tools. I am asking for help for him because he cannot speak English. His question is: 1. "When I make roads with polylines I cannot see them in Bulldozer, what can I do to make them appear"? Thanks for helping.
-
SOLVED: Serialize/unserialize map markers, including Polylines
kaleb c0d3 posted a topic in ARMA 3 - MISSION EDITING & SCRIPTING
Sup all! I've made a modification of BIS_fnc_markerToString and BIS_fnc_stringToMarker to allow Polylines (map drawings) to be serialized/unserialized, because native scripted functions does not allows it. I'm currently using this because my players sometimes participate in a pre-mission recon and this allows them to save important map intel data, that will be re-renderized on their maps on the official mission day. Use/modify them as you see fit. Enjoy! GLMRK_fnc_markerToString: GLMRK_fnc_stringToMarker: -
Kalvoy YouTube Trailer/Showcase I'm currently hosting a Free-For-All server on this map! Can't guarantee it will have players, but search for "Kalvoy" in the server browser if you wanna hop on & try it out 🙂 Kalvoy (Kalvøy) is a small & dense map based in southern Norway. The map currently contains 3 walled off Free-For-All modes, and a plain sandbox mode. I've been working on this map for a few weeks, and plan on adding a couple of missions + doing playtests & bug-fixing. Bugs are to be expected, so feel free to comment here or @ me in the Arma discord if you want to report bugs or just give some feedback. Cheers! Doktor Plekter
-
In a game based on the use of the compass and the map for orientation, it could be interesting to have a survey map. Of course, it would be a useful asset to orient himself and organize the actions of his camp. The Everon map created by the "topography" code from Operation Flashpoint Arma:ColdWar Assault is completely useless. It is always possible to make your own map from assembled screenshots, that's what I did! It's useful, but it's of poor quality.😕 This is why, in any case, I think that distributing a map in the form of a .pdf file would be a minimum, a printed map would be perfect.
- 6 replies
-
- 2
-
-
- reforger
- topographic
- (and 1 more)
-
Is there an online resource for Map Legend / Key for all the Symbols used on the map please ?
-
Hi, in the first weeks I could move or remove assets from the eden map directly, and over a week I created my own custom towns and villages. Since the last updated, all my work from last week is lost and the changes are undone. I guess you are not allowed to edit the default layer of Eden any more. But how can I now make changes to already existing maps? For example, remove buildings and replace them with other assets?
-
Sup all. I've have another question, this time, related to map markers. I'm running missions that slipts into two events: one day for recon, and the other for the mission itself. On recon day, a small group of players inserts into the map and makes a survelliance run, gathering the intel for the second day, that is, "the mission" itself. I want to save all the players markers on recon event (wich I can do via scripting), and then export them to the "mission map". The thing is that on single player, I can grab the map markers array data and export it as a string using "copyToClipboard", but according to Bohemia wiki, it's a server side only function. On a dedicated server, I'm running into problems to get that data from a client. What I achieved so far: Server side script: grab all the players markers into an array, then "send" that data to a zeus enabled player (client). On client side, I've got the markers data. Missing: how can I do to "export" that data. Any ideas? Thanks in advance.
-
Can I stop the moving map in flight ??
Aleksander-Strugatsky posted a topic in ARMA 3 - QUESTIONS & ANSWERS
Hello. I am flying transport on a quite popular MP server ( Invade and Annex mission ) turnarounds are fast and the AO changes all the time. What I need is the map to stay focused where I want it, and it does not change when opening and closing. Zooming out, click dragging and zooming in every time I want to check the AO is quite annoying. The mission is MP , I am not hosting the game and I am not sure if they would let me use a mod. Is there a .cfg I can tweak ? In the editor if I get out of my heli and do some mapology the map stays at the last position , so I can open cand close the map and it will still show the same position ( no MY position but the one I am studying ) . If I get back into the heli this stops working. and it goes back to the whatever you call this function thing... HELP ! G. -
Hello Everyone! I am bothered the last weeks with an idea but missing the skills and capacities to form it into reality. I know you heard that a lot of times here and I am indeed searching for people who are willing to bring this project to reality because they would love it to be in the game! As you could read already in the title I would love to have DCS in Arma 3. What does that mean? Well, ArmA delivers a good balance between Sim and casual concerning flight mechanics and since the jet dlc there is quite some potential. Unfortunately most ArmA maps, although already large, lack the seize of an air to air combat map. My idea involves the following: 1. Build a map which is big enough with at least two airports at opposite ends. (This is possible also with way beyond reasonable fps looking at maps like "south east Asia"; the importance, I guess, is to keep the prop count low, textures minimal, amongst other stuff) 2. Build a simple MP ready mission where people can fight each other on this map in planes, nothing else than this map as a mod needed, but of course welcomed to build upon this with mods and stuff! 3. Integrate a mission system so there is always something to do and out of these missions dog fights and so evolve. 4. Bring scripts in as view distance, Driving planes backwards, and rearming pylons to your likings. I know that I might not be the first one having the idea and I also know that most people would just say "learn it and do it". Nevertheless I thought asking doesn't cost anything and perhaps there are some of you out there who already have the skills and like the idea and we could make it come to life together. I mean, we could build a solid alternative for DCS with lesser focus on the simulation but the action without getting to casual, because I think Arma delivers it! And it would be free for all those who already own Arma! No new flight game needed, we basically have it within the game, no one woke it really up, yet! Also it would close the gap to Arm4 coming out 2044 a bit, delivering a new way to enjoy and experience the game. I am open for any suggestions, help, information or critics. Perhaps something like this is already in development and I haven't found it (South East Asia doe lacks the two airports at the end of the map and I tried to build them in the editor afterwards, which was not really working...). At least I wanted his idea to be out there in this amazing community, even if no-one is at first answering or interested. Thank you all and have a nice day!
-
I recently watched the dev stream and heard you guys speak about nerfing the SG1s and HBAR. I personally think that’s a great idea because they have to be one of the most used guns in the game. Every encounter I’ve played thiers atleast 1 trio team with both of them. I understand the HBAR and SG1 are supposed to be variants for the AUG A1 and GEWER 3. I think just turning both those guns to semi auto would be a excellent idea since they both have long range scopes on them. Also, swapping the magazines in the SG1 and gewer 3 would be ideal also. Give the 30 round mag to the gewer 3 and give the 20 round mag to the SG1. Lowering the fire rate of the HBAR by 50 could be good also. i also noticed the yellow star markers sometimes glitch and have the same numbers on them. And the numbers are so small they are hard to see. I thought changing the colors on them for each player would be great. (Like the pings) Thank you
-
Hamworthy Barracks - Work In Progress - Terrain
K. Robinson posted a topic in ARMA 3 - ADDONS & MODS: COMPLETE
Hamworthy Barracks This is not an exact replica. This is a work of my own. Map size approx: 5km x 5km ~ Description : Royal Marines Base Poole (RM Poole) is a British naval base located in Hamworthy a suburb of Poole, Dorset, England on the Poole Harbour and is the centre for Special Boat Service activities. Workshop Link: https://steamcommunity.com/sharedfiles/filedetails/?id=2419770771 -
I came across this post recently and while it has solved most of the visual issues I have with Sector control, I still have no idea how to change the last grey ellipse shapes to something else. I wanted to use flags for both the neutral and captured state. Earlier post:
-
CYTECH INDUSTRIES - [WIP] Underground Terrain Team
Dan Tronic posted a topic in ARMA 3 - FIND OR OFFER EDITING
CYTECH INDUSTRIES a unique and ambitious project in its complexity and settings. For more info check out the link to the BIS forums below DISCORD Forum Post What are we looking for? - Level Design/Composition: [Eden editor/ Xcam/Plopper/other]. - 3D Modelers: [blender/3dmax/other]. - Model porting: [experience preferred] porting UE4, Unity assets, other / making models ArmA ready - Texture artist: [For re-textures, HD texture editing, etc.] - Audio / Sound: [Someone who has knowledge of the Arma 3 audio tech] - Weapon porting [experience essential] - Animations: [Experienced Animation specialist] What's in it for you - An exciting project to showcase your work - Full credits - A friendly team to work with and learn from Please contact Dan Tronic for more info. -
ABOUT [RATS.ins] jujurat presents Fort Bragg Training Grounds, a 1km terrain that seeks to provide a playable, atmospheric, and engaging take on North Carolina wetlands in WW2. Fort Bragg is a US Military Base that was home to the 9th Infantry Division and Carolina Maneuvers. This terrain attempts to recreate those wetlands, and the areas around it in the approximate time period using real world data, and of course some fictional liberties taken to make the map playable for Arma. Home of the 9th Infantry Division Fort Bragg is a major United States Army installation Base in Cumberland and Hoke counties, North Carolina, situated mostly in Fayetteville but also partly in the town of Spring Lake. It covers over 251 square miles (650km2) in four counties. Camp Bragg was established in 1918 as an Artillery training ground. The aim was for six Artillery Brigades to be stationed there and $6,000,000 was spent on the land and cantonment. There was an airfield on the camp used by aircraft and balloons for Artillery spotters which was named Pope Field on April 1st, 1919, in honor of First Lieutenant H. Pope, an airman who was killed while flying nearby. The work on the camp was finished on November 1st, 1919. It was named to honor the native North Carolinian, General Braxton Bragg, who commanded Confederate States Army forces in the Civil War. This terrain was created in about six hours for the purposes of training for WW2 units (my unit, the 9th Infantry Division in particular), and for any general purpose use. I have not used any IFA3 objects in the terrain in-case anyone would like to use it for miscellaneous purposes. Features Swamp/wetlands. Extensive trees and forests. Rugged roads and complex forest terrain. Custom lighting config. Plans for the Future There is nothing majorly planned for this terrain. It is intentionally small and serves as a preview of quality coming up with my Hürtgen Forest terrain, which is 4km large. Possibly a new sat map if I get around to it, but for now, I'm using the satellite version, which is responsible for some rather jarring artifacts in some places. Stats for Nerds 1km Cell Size 2 Credits and Thanks For providing great information and help at times of need: Mondkalb Ice Adanteh A3 Discord Terrain Channel Friends, Historical References: Motta (Fellow 9th Infantry Division fanatic) Vintorez This map was made for my WW2 realism unit, 9th Infantry Division; as well as the WW2 Arma 3 Community. Thanks. DOWNLOAD Current mirror: Steam Workshop. I don't intend on uploading it to Armaholic, but if someone would like to do so, that's fine. Just use all of the information posted here. 🙂 Terrain images included on Steam Workshop page.
