msy 22 Posted October 27, 2015 With every update first thing I do is start an Infantry showcase, hence I know this mission like the back of my hand =). So here's my impression: 1. Weapon behavior is definately changed once again and I find it harder to aim than before. As to 2,3 and 4 - in latest dev I see no significant changes compared to stable. The last time this mission felt considerably different was before that change to AI where they started to throw smokes and run for hide. Since then every playthrough looks pretty much the same. 1 is a new change for players but may be not for AI 2~4 is old problem that hasn't been balanced 1+2+3+4 make it harder and harder to complete those two showcases. Share this post Link to post Share on other sites
Roach_ 52 Posted October 27, 2015 1 is a new change for players but may be not for AI 2~4 is old problem that hasn't been balanced 1+2+3+4 make me harder and harder to complete those two showcases. 1 Share this post Link to post Share on other sites
andersson 285 Posted October 27, 2015 That's the way it SHOULD be. Run in the direction you are looking... No. You should run in the direction your body is facing not where your gun is pointing. With aiming dead zone 0 those two are the same so then you are running where your gun/body is pointing. With a higher aiming deadzone you can run in the same direction while shooting more to the left or right to you. Fixed: Turning in the deadzone during combat pace Thank you BI :) 1 Share this post Link to post Share on other sites
DancZer 65 Posted October 28, 2015 Zafir's bipod continuously turn up and then down when it's deployed. It is stays in the deployed mode, only the animation and sound looping. Can somebody confirm this? Share this post Link to post Share on other sites
Electricleash 133 Posted October 28, 2015 Zafir's bipod continuously turn up and then down when it's deployed. It is stays in the deployed mode, only the animation and sound looping. Can somebody confirm this? Will check when I get back from work, but I've noticed deployment in general, particularly in Prone stance is a bit janky this week for some reason. not responding to the deploy key in about 7 cases out of 10. No mods involved. Share this post Link to post Share on other sites
Kryptongame 14 Posted October 28, 2015 Will check when I get back from work, but I've noticed deployment in general, particularly in Prone stance is a bit janky this week for some reason. not responding to the deploy key in about 7 cases out of 10. No mods involved.I've been having trouble doing all kinds of things like changing stances, keys not registering when I hit them, etc. Share this post Link to post Share on other sites
Maxzy 12 Posted October 28, 2015 Added: Stamina drain parameters for terrain (not yet configured) Is this parameter depends on a type of terrain or it's inclination? Or both? Considering "parameters" I hope it's at least those two =). Share this post Link to post Share on other sites
ceeeb 147 Posted October 28, 2015 Is this parameter depends on a type of terrain or it's inclination? Or both? Considering "parameters" I hope it's at least those two =). Adding a terrain type factor for stamina cost would be nice, but it could complicate AI pathfinding (assuming they would consider it). Sand and mud are both common on Fiji/Tanoa. Share this post Link to post Share on other sites
Electricleash 133 Posted October 28, 2015 Zafir's bipod continuously turn up and then down when it's deployed. It is stays in the deployed mode, only the animation and sound looping. Can somebody confirm this? So, I'm afraid that I'm not seeing the Zafir bipod issue my end. Not sure what could be the problem. I've been having trouble doing all kinds of things like changing stances, keys not registering when I hit them, etc. Do you have radically different key bindings to the default setup? Bluetooth keyboard starting to run low on juice? Sounds stupid but it's happened to me before. For my part I'm only experiencing the deploy (Ctrl+C) problem as far as key response goes. Share this post Link to post Share on other sites
Kryptongame 14 Posted October 29, 2015 So, I'm afraid that I'm not seeing the Zafir bipod issue my end. Not sure what could be the problem. Do you have radically different key bindings to the default setup? Bluetooth keyboard starting to run low on juice? Sounds stupid but it's happened to me before. For my part I'm only experiencing the deploy (Ctrl+C) problem as far as key response goes. Not at all I use a wired keyboard and default stance keys, so like ctrl+s sometimes won't work like any of the ctrl+key bindings. Share this post Link to post Share on other sites
neodammerung 8 Posted October 29, 2015 Tweaked: Reading and checking of file signatures moved to a different thread so it won't block the main thread Share this post Link to post Share on other sites
twisted 128 Posted October 29, 2015 get these errors in latest dev wehn using arsenal. didnt have this error this mroning. Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabPrimaryWeapon/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabSecondaryWeapon/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabHandgun/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabUniform/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabVest/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabBackpack/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabHeadgear/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabGoggles/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabNVGs/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabBinoculars/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabMap/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabGPS/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabRadio/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabCompass/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabWatch/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabFace/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabVoice/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabInsignia/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabItemOptic/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabItemAcc/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabItemMuzzle/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabItemBipod/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabCargoMag/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabCargoThrow/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabCargoPut/ 21:58:43 Error in expression <<null>> 21:58:43 Error position: <<null>> 21:58:43 Error Invalid number in expression 21:58:43 Error loading control bin\config.bin/RscDisplayArsenal/Controls/TabCargoMisc/ Share this post Link to post Share on other sites
muf 49 Posted October 29, 2015 get these errors in latest dev wehn using arsenal. didnt have this error this mroning. Thanks for letting us know, we're already working on the fix. Should be ok in the next dev branch update. 1 Share this post Link to post Share on other sites
code34 248 Posted October 29, 2015 hi, Do you know if c# dll are support in the last release ? if not is it possible to support it ? Share this post Link to post Share on other sites
x3kj 1247 Posted October 30, 2015 >>> Fixed: Proper distinction between player and AI when selecting weapon mode Previously the AI would sometimes select e.g. a "manual" fire mode, which is intended for player only and is configured with values that should prevent AI from using it. The typical result was AI firing with single shots and long gaps between them. More improvements are inbound to cover other situations where this can occur. Is the solution beeing implemented directly in AI behaviour, or is it by choosing different config values for the weapon mode? Share this post Link to post Share on other sites
gossamersolid 155 Posted October 30, 2015 hi, Do you know if c# dll are support in the last release ? if not is it possible to support it ? You can write C# Extensions for ArmA using a NuGet Package named "Unmanaged Exports". This is what I use and it works great. https://www.nuget.org/packages/UnmanagedExports Share this post Link to post Share on other sites
Tom_48_97 523 Posted October 30, 2015 hi, Do you know if c# dll are support in the last release ? if not is it possible to support it ? This is already possible and it's planned to release an example in Arma 3 Samples (soonTM) :292: 2 Share this post Link to post Share on other sites
froggyluv 2135 Posted October 30, 2015 Samples? That looks pretty frickin exciting Share this post Link to post Share on other sites
code34 248 Posted October 30, 2015 thanks guy for your answers . It seems i have a problem and i don't understand why cause i already test with NuGet Package i compiled this code with xamarin studio framework 4.5 under w10 for x86, but i don't understand why the entrypoint seems not be recognize. (i turned off battleye) using RGiesecke.DllExport; using System; using System.Runtime.InteropServices; using System.Text; namespace ARMAExtCS { public class DllEntry { [DllExport("_RVExtension@12", CallingConvention = CallingConvention.Winapi)] public static void RvExtension(StringBuilder output, int outputSize, string function) { outputSize--; // Reverses the input string char[] arr = function.ToCharArray(); Array.Reverse(arr); string result = new string(arr); output.Append(result); } } } @Tom do you mean it is the case directly without NuGet Package ? Share this post Link to post Share on other sites
2nd ranger 282 Posted October 30, 2015 Tweaked: UGL prone animations improved for Mk20 / TRG-21 I guess you're still working on all the UGL anims, but since they were changed the other day after the first implementation, the TRG one looks a little unnatural compared to the Mk20. If you view it in slow motion, it looks more like some sort of automated loader is inserting the shell, rather than a human hand. The Mk20 UGL anim looks more fluid. Tweaked: The PDW reload animation has been improved Not sure if this is related to graphics settings, but when I reload the PDW, the semi-transparent parts of the grip and magazine become blue in first person. Anyone else get this? Also, hosted MP games are still unplayable because of the 'loading screen' bug. Share this post Link to post Share on other sites
gossamersolid 155 Posted October 30, 2015 code Here's how I call it ingame _returnVal = "FSExt" callExtension "String to be passed to C#"; Here's what mine looks like, works perfectly with BE off (mine's a server-side extension so I don't need it whitelisted) using RGiesecke.DllExport; using System; using System.Collections.Generic; using System.Linq; using System.Runtime.InteropServices; using System.Text; using System.Threading.Tasks; namespace FSExt { public class DLLEntry { [DllExport("_RVExtension@12", CallingConvention = System.Runtime.InteropServices.CallingConvention.Winapi)] public static void RVExtension(StringBuilder output, int outputSize, [MarshalAs(UnmanagedType.LPStr)] string function) { //Logic in here } } } Share this post Link to post Share on other sites
da12thMonkey 1943 Posted October 30, 2015 I'm guessing this fix 30-10-2015 EXE rev. 133137 (game) EXE rev. 133142 (launcher) Size: ~268 MB DATA Fixed: Hand position on the NLAW was intended as the fix for this. However, ingame both hands positions now appear to be rotated 90-degrees to where the animator intended to hold the weapon - causing wrist clipping through the optics mesh among other things Share this post Link to post Share on other sites
code34 248 Posted October 30, 2015 thanks gossamersolid but it doesn't work too :( i don't have any clue where it can came from. Do you use it under windows 10 ? Share this post Link to post Share on other sites
AveryTheKitty 2626 Posted October 31, 2015 Last time I played the end game missions (when Feres and Zaros were released), they were all very abnormally quiet. Has this been fixed? Also, please add hiddenSelections for the 4-five! http://feedback.arma3.com/view.php?id=26387 Share this post Link to post Share on other sites
danil-ch 165 Posted October 31, 2015 Tweaked: Increased the time of reloading Mk18 Still too fast. 2 Share this post Link to post Share on other sites
