Kerc Kasha 102 Posted March 22, 2014 I can barely see the weapon in that screenshot, other than that, I see the moon and a silhouette of the horizon but that's it, any chance your monitor settings have changed or something? Yeah that looks pretty fitting for a half moon light, visibility is barely infront of you Share this post Link to post Share on other sites
doveman 7 Posted March 22, 2014 Are you ever going to fix the rubber trees, that you've carried over from ArmA2? It's hard to take it seriously when every tree trunk is swaying back and forth, as if it's not properly planted and about to fall over! I'm guessing the engine isn't capable of animating individual branches and you thought doing this would make the surroundings seem more alive and less static but it was a bad idea IMO and is very distracting. Share this post Link to post Share on other sites
dunedain 48 Posted March 22, 2014 I can barely see the weapon in that screenshot, other than that, I see the moon and a silhouette of the horizon but that's it, any chance your monitor settings have changed or something? Well that's funny I exactly noticed the same thing as Tonci87 and thought not without disgust that BiS had made nights brighter to shut all the whiners' pie holes. But then I changed monitor for a Benq XL2411T recently. :o Share this post Link to post Share on other sites
John Kozak 14 Posted March 22, 2014 (edited) Let me guess... You guys both use NVIDIA card with HDMI cable? because by default, it outputs a noticeably brighter picture (RGB clamping 16-235). Edited March 22, 2014 by DarkWanderer Share this post Link to post Share on other sites
Tonci87 163 Posted March 22, 2014 Let me guess... You guys both use NVIDIA card with HDMI cable? because by default, it outputs a noticeably brighter picture (http://community.futuremark.com/forum/showthread.php?170067 '>RGB clamping 16-235). No HD5850 Sapphire Toxic connected via Display Port to my Dell 2412m. I just struggle to find the optimum brightness/contrast levels for my monitor. Share this post Link to post Share on other sites
DancZer 65 Posted March 22, 2014 I found two serious issues with the AI during the campaign. These happened with me 3 times so after rage quit i made tickets (with the save games for the reproducing). Here are you are : AI stuck and not move - http://feedback.arma3.com/view.php?id=18039 AI not move to the ordered position - http://feedback.arma3.com/view.php?id=18042 I noticed the "AI not move to the ordered position" issue many times before, but now it is easy to reproduce. Check these sasp, please! Share this post Link to post Share on other sites
GranolaBar 10 Posted March 22, 2014 (edited) When we mount (in all the choppers and vehicule i think) in the A10 or get out, there is a problem with the camera. The soldier look on the front of the aircraft (or vehicule) and not his movments, he get in without look the corckpit... no problem with animations but if we can't see that.. Edited March 22, 2014 by GranolaBar Share this post Link to post Share on other sites
dunedain 48 Posted March 22, 2014 Let me guess... You guys both use NVIDIA card with HDMI cable? because by default, it outputs a noticeably brighter picture (RGB clamping 16-235). HD7850 via DVI port. The BenQ XL2411T is a mess colorwise though, and way too bright... It took me some time and research to get something remotely decent. Share this post Link to post Share on other sites
Sneakson 1 Posted March 22, 2014 I tried devbranch... the nearest neighbour resampling glitch for textures is still present. Only me, something caused by a new patch or has it always been like this and I just haven't noticed? Share this post Link to post Share on other sites
Fushko 59 Posted March 24, 2014 Dear Arma 3 devs, Now that the campaign is finished, can we get the whole LOD system reworked from scratch? The LOD popping/flickering on grass/bushes/trees/buildings/everything, is driving me insane - since the damn alpha - and we have seen next to no progress about it since March 2013. Think about it. Thanks in advance. Share this post Link to post Share on other sites
kecske 46 Posted March 24, 2014 Disabled lights on the front gear of To-199 Any reason for this? Now it's just a bright spot which doesnt illuminate the ground. Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted March 24, 2014 Dear Arma 3 devs,Now that the campaign is finished, can we get the whole LOD system reworked from scratch? The LOD popping/flickering on grass/bushes/trees/buildings/everything, is driving me insane - since the damn alpha - and we have seen next to no progress about it since March 2013. Think about it. Thanks in advance. Great idea in my opinion, maybe then i could stop laughing when playing in "Ultra" settings. I love it when enemy soldiers are glitching into the ground, often you can only spot a head popping out of the ground when using thermal binoculars Share this post Link to post Share on other sites
Mr. Charles 22 Posted March 24, 2014 Any reason for this? Now it's just a bright spot which doesnt illuminate the ground. Yeah, plus, now you can't see anything in front of you. Share this post Link to post Share on other sites
Tonci87 163 Posted March 24, 2014 Great idea in my opinion, maybe then i could stop laughing when playing in "Ultra" settings. I love it when enemy soldiers are glitching into the ground, often you can only spot a head popping out of the ground when using thermal binoculars This has nothing to do with LODs. They aren´t glitching into the ground. It is made like that to "simulate" them lying in grass and beeing obscured by it. Share this post Link to post Share on other sites
Sneakson 1 Posted March 24, 2014 Dear Arma 3 devs,Now that the campaign is finished, can we get the whole LOD system reworked from scratch? The LOD popping/flickering on grass/bushes/trees/buildings/everything, is driving me insane - since the damn alpha - and we have seen next to no progress about it since March 2013. Think about it. Thanks in advance. I haven't actually noticed a lot of LOD flickering since I upgraded my computer. I still play with object/terrain quality on Standard/High. So I guess it's hardware dependent? This has nothing to do with LODs. They aren´t glitching into the ground. It is made like that to "simulate" them lying in grass and beeing obscured by it. THAT was a bad idea... I wish they would just mow the entire island and make the grass shorter. That would make it easier to see out of grass when you're lying in it so it would even the playing field between someone lying and someone standing far away. Share this post Link to post Share on other sites
Tonci87 163 Posted March 24, 2014 I haven't actually noticed a lot of LOD flickering since I upgraded my computer. I still play with object/terrain quality on Standard/High. So I guess it's hardware dependent?THAT was a bad idea... I wish they would just mow the entire island and make the grass shorter. That would make it easier to see out of grass when you're lying in it so it would even the playing field between someone lying and someone standing far away. But it would look really unnatural. The grass is already very short compared to what you can find in nature. Share this post Link to post Share on other sites
bigpickle 0 Posted March 24, 2014 Massive fps drops and odd game behavior since last patch. Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted March 24, 2014 This has nothing to do with LODs. They aren´t glitching into the ground. It is made like that to "simulate" them lying in grass and beeing obscured by it. I´ve heard that statement already. In my eyes its an ugly solution, i played a lot of games but i cant remember that it looks like so strange like in Arma. "Simulate the grass" is a great (^^) definition for that, hahahaha. Grass is only ~50meters displayed from players position on Ultra settings, so no need to simulate on 500meters ^^ Massive fps drops and odd game behavior since last patch. I´ve mentioned it already. Last week. After patching. Share this post Link to post Share on other sites
Fushko 59 Posted March 24, 2014 I haven't actually noticed a lot of LOD flickering since I upgraded my computer. I still play with object/terrain quality on Standard/High. So I guess it's hardware dependent? Try playing on ultra terrain/object settings. Drop a unit in the editor, in a place with lots of grass and bushes. Sprint, then notice the infuriatingly distracting *pop* *pop* *pop* *pop* *pop* *flicker* *flicker* *flicker* on the grass and rocks. Spawn a heli and fly low towards a town. LOD switching is very aggressive there. Share this post Link to post Share on other sites
Tonci87 163 Posted March 24, 2014 I´ve heard that statement already. In my eyes its an ugly solution, i played a lot of games but i cant remember that it looks like so strange like in Arma. "Simulate the grass" is a great (^^) definition for that, hahahaha. Grass is only ~50meters displayed from players position on Ultra settings, so no need to simulate on 500meters ^^I´ve mentioned it already. Last week. After patching. Trust me it is better than what we had before. We didn´t have that solution when Arma 2 was released, so units lying on the ground were very visible from even far distances. You woudn´t want that back. Share this post Link to post Share on other sites
xendance 3 Posted March 24, 2014 Try playing on ultra terrain/object settings. Drop a unit in the editor, in a place with lots of grass and bushes. Sprint, then notice the infuriatingly distracting *pop* *pop* *pop* *pop* *pop* *flicker* *flicker* *flicker* on the grass and rocks.Spawn a heli and fly low towards a town. LOD switching is very aggressive there. Yea the LOD switching is way too aggressive. Honestly I'd just drop the highest LOD models completely and just have it not pop so close to the view. Share this post Link to post Share on other sites
jumpinghubert 49 Posted March 24, 2014 The grass cover effect at long distances was canceled in an earlier version of arma2 and was first introduced in arma (1) aka armed assault. Share this post Link to post Share on other sites
Sneakson 1 Posted March 24, 2014 But it would look really unnatural. The grass is already very short compared to what you can find in nature. Still... shorter grass could both make crawling-standing firefights fairer and maybe even improve performance. I'd rather have short, static grass going a thousand meters than high, windy grass and stuff that pops up 25 meters in front of me and makes it absolutely impossible to shoot anyone when crawling. I really wish there was an option to disable grass and parallax without turning down your Object/Terrain Quality settings that affect a lot of things. Both make crawling awful. Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted March 24, 2014 Still... shorter grass could both make crawling-standing firefights fairer and maybe even improve performance.I'd rather have short, static grass going a thousand meters than high, windy grass and stuff that pops up 25 meters in front of me and makes it absolutely impossible to shoot anyone when crawling. I really wish there was an option to disable grass and parallax without turning down your Object/Terrain Quality settings that affect a lot of things. Both make crawling awful. For Singleplayer you can use MCC, there is a Setting to disable all Grass Share this post Link to post Share on other sites
vegeta897 13 Posted March 25, 2014 Grass is only ~50meters displayed from players position on Ultra settings, so no need to simulate on 500meters ^^ You're missing the point. They "simulate" the grass at 500m because it isn't rendered past ~50m. That's the whole idea. They can't afford to render grass at that distance, so to prevent a player laying in grass from being too noticeable, they raise the visual height of the ground. It may look glitchy, but I'd rather have balance than a slight visual improvement. Share this post Link to post Share on other sites