Damian90 697 Posted January 8, 2015 My estimates are about 10% lower for front, (so almost the same) but sides arent a bit too optimistic? I think they arent more than 55-60mm. Sides are made from the same material as front, upper side hull is also angled + there is side skirt made from HHS plate. Do you know the effectiveness of ERA? Can we give them about +300-400mm VS CE? (vs single warhead only) Here is the problem, nobody knows the efficency of ARAT, BRAT and SRAT ERA, however I heard it was capable to stop even PG-29V (sic!), not immposible considering that this ERA have layered design, there are at least 4-5 reactive layers inside with some sort of isolation or amortization in between layers. I haven't been able to find anything on search at the moment, but are you guys planning to add sidearms? I think Russia has the renamed vanilla pistol,but the US has nothing. We plan to, they are just not ready as they had lower priority over other stuff. :) Share this post Link to post Share on other sites
archbishop lazarus 24 Posted January 8, 2015 Sides are made from the same material as front, upper side hull is also angled + there is side skirt made from HHS plate. Well, that still doesnt explain. My estimate is: Hull front is 25mm AL + 30mm steel at 60 deg = ~90mm Sides are 25mm AL + 30mm steel up to 2/3-3/4 height = ~45mm. The remaining 1/3 - 1/4 is a bit angled, and seems to be partially reinforced with around 5-10mm steel, so ~55-60mm. So sides are definitely 3UBR6 proof, but I wouldnt be sure about 3UBR8, especially the lower 2/3-3/4 of the hull, which is still a very big target. BTW, what about the rear ramp? That is the only part that seems REALLY thick. Share this post Link to post Share on other sites
Damian90 697 Posted January 8, 2015 Well, that still doesnt explain.My estimate is: Hull front is 25mm AL + 30mm steel at 60 deg = ~90mm Sides are 25mm AL + 30mm steel up to 2/3-3/4 height = ~45mm. The remaining 1/3 - 1/4 is a bit angled, and seems to be partially reinforced with around 5-10mm steel, so ~55-60mm. So sides are definitely 3UBR6 proof, but I wouldnt be sure about 3UBR8, especially the lower 2/3-3/4 of the hull, which is still a very big target. Maybe, we would need good armor schematic. BTW, what about the rear ramp? That is the only part that seems REALLY thick. it's not homogeneus, seems to be spaced armor made from two thinner plates with air gap in between. Share this post Link to post Share on other sites
jerminhu 25 Posted January 8, 2015 What's the class name of Gaz-66 Ammunition resupply trucks? Share this post Link to post Share on other sites
legolasindar 3 Posted January 8, 2015 If your control preset is not "Arma 3" then I think you should press whatever your "Countermeasure mode" key is. It located at the bottom of "Weapons" category in Controls. :) In my case work with Ctrl+G, but this set OFF laser o torch, i need push L again. Share this post Link to post Share on other sites
Jona33 51 Posted January 8, 2015 In my case work with Ctrl+G, but this set OFF laser o torch, i need push L again. It's presumably the workaround they use, in that when you switch the mode it changes the attachment, they have the same model but one is a laser and one is a light. The default state is evidently off and I don't think there is a command to force a unit to turn on it's attachment. Share this post Link to post Share on other sites
pulstar 55 Posted January 8, 2015 Just had one of those Arma moments, drove my BTR80 into a corner and a column of footmobiles was wiped out in mere seconds. War is horrible. :( Share this post Link to post Share on other sites
Kaxii 11 Posted January 8, 2015 Do you guys plan to add the helmet idea I suggested a few pages back into the next patch? Share this post Link to post Share on other sites
orcinus 121 Posted January 8, 2015 Just had one of those Arma moments, drove my BTR80 into a corner and a column of footmobiles was wiped out in mere seconds. War is horrible. :( Gah, I thought the AI drivers were bad enough. Posts like this make me glad I don't play MP <eg> More seriously, AI drivers massacreing friendly grunts is much worse than in A2/CO. And even the faintest brush with a slow-moving vehicle kills the unit, which is ridiculous. I use kju's addon for A2 to disable all friendly fire - it disables friendly vehicle kills 100% irrespective of whether the driver is AI or human. Share this post Link to post Share on other sites
pulstar 55 Posted January 8, 2015 I actually meant the BTR gunner took down 12+ soldiers in a few seconds, with Blastcore effects it was intense and ghastly! I was the driver :p Share this post Link to post Share on other sites
tokyoindia 18 Posted January 8, 2015 Thank you for such a great mod. The detail is simply amazing! Could any one point me in the direction where I could find a list of class names for vehicles doors so I can animate them in the editor? I can't seem to find it on the RHS wiki. Share this post Link to post Share on other sites
mistyronin 1181 Posted January 8, 2015 If your control preset is not "Arma 3" then I think you should press whatever your "Countermeasure mode" key is. It located at the bottom of "Weapons" category in Controls. :) In my case work with Ctrl+G, but this set OFF laser o torch, i need push L again. Yup, Semiconductor got it right, we coded it using the "Next Counter-Measure" bind. The "Next Counter-Measure" bind switches between laser and torch, the L key it's to turn it on or off. ---------- Post added at 00:50 ---------- Previous post was at 00:48 ---------- BTW here there is a really awesome tutorial of how the Horus sight work ( thanks to i3r4ndon for providing it ): Share this post Link to post Share on other sites
HJohnson 16 Posted January 9, 2015 Small issue with the 1x scope in one of the distance lods. The "make the 3d scope work" part of the ACOG doesn't have the proper transparent texture applied. As a result people at more than 20ft look like they have a long white styrofoam cup around their optic. Share this post Link to post Share on other sites
redarmy 422 Posted January 9, 2015 Small issue with the 1x scope in one of the distance lods. The "make the 3d scope work" part of the ACOG doesn't have the proper transparent texture applied. As a result people at more than 20ft look like they have a long white styrofoam cup around their optic. I pointed out this issue since first version.Glad someone came along to also repor. Please help by listing your mods.Go back a few pages to my post in which iv also listed mine. Find any matching mod,disable it,and test again....report back let us know whats causing this issue. Share this post Link to post Share on other sites
DGeorge85 10 Posted January 9, 2015 I pointed out this issue since first version.Glad someone came along to also repor.Please help by listing your mods.Go back a few pages to my post in which iv also listed mine. Find any matching mod,disable it,and test again....report back let us know whats causing this issue. I'm seeing it too, but I agree with him that it's texture related. I'm thinking they forgot the texture for the associated LOD. Share this post Link to post Share on other sites
mistyronin 1181 Posted January 9, 2015 Would you mind sending a pic please. I've been testing it, and I can see the same ACOG at 5m as 20m, and even at 50m... Share this post Link to post Share on other sites
ACPL Jon 68 Posted January 9, 2015 The new release is epic. 300 times more enjoyable, compared to 0.30. Thanks! Share this post Link to post Share on other sites
DGeorge85 10 Posted January 9, 2015 Would you mind sending a pic please. I've been testing it, and I can see the same ACOG at 5m as 20m, and even at 50m... It must not be a texture thing because not every soldier that appears to also have the ACOG and laser/flashlight combo have the white anomaly. If I take another step towards this guy it goes away. Edit: It also goes away beyond 123m or so. http://i.imgur.com/M0w5KzR.jpg (480 kB) Share this post Link to post Share on other sites
reyhard 2082 Posted January 9, 2015 the thing is, that all lods have texture but they have different number of res lods/lods numbering and probably that where issue lies. anyway, join my final take on that issue as it's really annoying never ending bug. hopefully -> that PBO <- should finally fix it. Please, report if issue is gone, thanks! (do backup before, do not use in mp, blabla) Share this post Link to post Share on other sites
twisted 128 Posted January 9, 2015 my tanks keep falling upside when going down moutains. especially the m1a1 and m1a2 tanks (pretty sure both). funny to see the first few times but now its something worth mentioning. Share this post Link to post Share on other sites
Redphoenix 1540 Posted January 9, 2015 my tanks keep falling upside when going down moutains. especially the m1a1 and m1a2 tanks (pretty sure both). funny to see the first few times but now its something worth mentioning. Welcome to A3 tanks' physX. Share this post Link to post Share on other sites
oldy41 61 Posted January 9, 2015 Has some kind person set up a download yet? (...since I don't really like those torrents... :-( ) Share this post Link to post Share on other sites
orcinus 121 Posted January 9, 2015 Has some kind person set up a download yet? (...since I don't really like those torrents... :-( ) tsk tsk, who hasn't read the thread yet? Hint: A*m*h*l*c Enjoy, it's a work of aart :) Share this post Link to post Share on other sites
TiborasaurusRex 11 Posted January 9, 2015 (edited) Hi guys :) I heard this mod offers some Horus Reticle, is it true? what type of Horus Reticle is it? I'm a big fan of Horus Reticle coz it's the best Miliradian BDC reticle ever made :) Can anybody show me some in-game pictures of it? if it looks good, i wanna run this mod. And does it work well with Advanced Ballistics? Playing Advanced Ballistics with Horus Reticle is gonna be one hell of an awesome long range precision shooting experience! :D Edited January 9, 2015 by TiborasaurusRex Share this post Link to post Share on other sites
oldy41 61 Posted January 9, 2015 tsk tsk, who hasn't read the thread yet?Hint: A*m*h*l*c Enjoy, it's a work of aart :) Seems like I am very bad in searching threads, but at least I am fair at decrypting complex chiffres based on lots of '*'. ;) Thanks a lot! Share this post Link to post Share on other sites