VILAS addons release thread

[vilas 474]

I downloaded a 229Mb file from the first page link of Project'85 vehicles. Is this correct for the newest version?!

if in game 2S7 after shot reloads (reloading , ammo feeding mechanism) than it is

________

as i have no knowledge about USA gear and equipment, i want ask for something:

i read many requests about Black Hawk Down stuff , i wanted to make such thing and US ca. 2000

i saw some vests in internet, which is proper, or all are okay ?

i don't know their names, but i wonder if they work for this era and what gear should be for them (webbing, pouches)

i will prepare US troops in tricolor + SF helmets too

such vests are multilayer so can be changed to beige, olive, tan, black

i just would like to have some direction (unless noone other work on such thing)

http://img717.imageshack.us/img717/1686/555kc.jpg

http://img62.imageshack.us/img62/5839/444hr.jpg

http://img842.imageshack.us/img842/4374/333uc.jpg

http://img832.imageshack.us/img832/2436/222pde.jpg

http://img822.imageshack.us/img822/4940/111uzq.jpg

woodland fabric is made of belt of fabric photo, i hope size of pattern fit well (size of pattern)

Edited February 10, 2011 by vilas

[Fox '09 14]

2000? probably a mix of IBAs and PASGT vests. SF probably spear armor, like you made (the one with the vertical molle), and the RBA (ranger body armor)

during restore hope , PASGT vests w/ 6 color covers and again an RBA for the vest.

[Harine 40]

Vilas, Off topic: your HiCap mag (60) are too long and thin, these are true :

[vilas 474]

so MOLLE is that old ? i thought it came with ACU

and this "Black Hawk Down" vest is real of not ? what about anti-pirate Navy units ?

[supergruntsb78 67]

you are right, my fault for mess in lack of some points in readme

no offence taken just a friendly reminder ;) if you want to apoligise then do so to my wife as she is offended enough by your work :p (thats because i don't go top bed but instead i am playing around in ARMA:CO with your troops :p )

[Fox '09 14]

so MOLLE is that old ? i thought it came with ACU

and this "Black Hawk Down" vest is real of not ? what about anti-pirate Navy units ?

yep. If you're talking about the ranger body armor, then yep. It was also used early into the iraq war http://lh6.ggpht.com/_xXziwkfbBpA/SwaFFyaEaLI/AAAAAAAAElw/suHBs29NmBw/s512/iraq-503rd-00aa08.jpg

[-KH-AlphaGuerilla 10]

Not sure if you know this but in the 2s1 the commander is on the wrong side of the "tower".

[lone.wolf 80]

Could it be possible to see a PSG-1 in the future of your west pack..?

[vilas 474]

regarding US ca. 2000

is this will be okay ?

RBA vest + Alice (belt not made on model on this screen)

and here RBA + DCU, is it okay ?

Edited February 11, 2011 by vilas

[Redcoalition 0]

if in game 2S7 after shot reloads (reloading , ammo feeding mechanism) than it is

It reloads but there's no animation of any feeding mechanism.

So, it's ok?!

[vilas 474]

than take new config , it should enable anim (100 kb only )

during animation of reloading arm of reloading crane should move

[lao fei mao 21]

than take new config , it should enable anim (100 kb only )

during animation of reloading arm of reloading crane should move

-----Sounds cool. Expecting something like this for quite a while.:D

[da12thMonkey 1943]

http://img200.imageshack.us/img200/5576/aaaoti.jpg

on request of Danish army mod - Diemaco

IIRC, the collapsible butt-stock on Diemacos are modelled after the 2nd Generation Colt stock like you made for made for the P85 XM-177, rather than the M4-type stock you have there, with all the holes cut along it.

I'm note 100% sure whether the Danes changed that with this upgraded version, but the Canadians retained this type of stock with their later versions of the C7 and C8. Might be worth checking.

Nice work on it though.

[topas 1]

Check the belly of the soldiers. There's a smdi or nohq or whatever messed up. You can see a pocket there :rolleyes:

Edited February 11, 2011 by topas

[gossamersolid 155]

Hey Vilas,

were you planning on adding in an RPG-32 to your Russian Weapons pack?

http://en.wikipedia.org/wiki/RPG-32

[stgn 39]

The Danish M10(C8IUR) has a mid-length rail about 9", the carbine length rail was only used on the first ones delivered to the Danish army as an interim solution, see the most recent Colt Canada catalog for the final result. It uses the gen 2(the "M4" version is gen 3) carbine buttstock with the optional CAA saddle. It has a special latch on the charging handle to make it ambidextrous, and a magpul pistol grip.

STGN

[vilas 474]

http://img64.imageshack.us/img64/3923/111owz.jpg

is this vest proper with Alice on BHD era , or not ?

if someone not seen picture site ago, please look and advice cause i have zero knowledge about US Army gear (i am making some US units to weaponholder addon, RBA vest show on previous site )

The Danish M10(C8IUR) has a mid-length rail about 9", the carbine length rail was only used on the first ones delivered to the Danish army as an interim solution, see the most recent Colt Canada catalog for the final result. It uses the gen 2(the "M4" version is gen 3) carbine buttstock with the optional CAA saddle. It has a special latch on the charging handle to make it ambidextrous, and a magpul pistol grip.

STGN

maybe you are right, i get photo and i did according to request

[Fox '09 14]

is this vest proper with Alice on BHD era , or not ?

if someone not seen picture site ago, please look and advice cause i have zero knowledge about US Army gear (i am making some US units to weaponholder addon, RBA vest show on previous site )

maybe you are right, i get photo and i did according to request

that is correct, although i think it only came in woodland. Delta force wore some black vest although i cannot point a finger to it.

http://www.usmilitariaforum.com/forums/index.php?showtopic=54203&st=0)

here's a bunch of info and photos of the RBA

---------- Post added at 08:51 PM ---------- Previous post was at 08:24 PM ----------

oh yes and one more thing vilas, the protecs were full cut, like this https://socalskateshop.com/images/products/thumb_7821_PTVN0FS1BLK-L.jpg unlike the movie 'black hawk down'

[vilas 474]

my bad due to lack of time to test all

in P85_V bug was reported , some of T72/64 had wrong behaviour when animating (some of wheels followed turret movement)

there was error caused by BIS tools :(

i rebinarised them and all works okay on my PC

i haven't touched MLODs , i haven't touched cfg_models, i just binarised it again

and after second binarisation works

i had such bug with BIS tools from time to time (BIS PBO binarizer sometimes won't be stopped till PC is rebooted )

i remember once upon a time when the same MLOD binarised once or second time had different filesize for 2 or 4 kb (although nothing was changed)

but this version should work without this bug

in hour P85_Vehicles will be on FTP

[vilas 474]

once again i have question about US Army:

http://img197.imageshack.us/img197/8776/444nh.jpg

http://img828.imageshack.us/img828/9052/333vr.jpg

http://img20.imageshack.us/img20/4743/222wr.jpg

http://img191.imageshack.us/img191/4079/111vtt.jpg

is it okay, any suggestions ? is gear good ? (i know about helmet, but let's it be BHD-ish)

they will be part of my weapon holders, vests : PASGT, RBA, SPEAR, OTV (Arma1) and BHD

[Fox '09 14]

once again i have question about US Army:

http://img197.imageshack.us/img197/8776/444nh.jpg

http://img828.imageshack.us/img828/9052/333vr.jpg

http://img20.imageshack.us/img20/4743/222wr.jpg

http://img191.imageshack.us/img191/4079/111vtt.jpg

is it okay, any suggestions ? is gear good ? (i know about helmet, but let's it be BHD-ish)

they will be part of my weapon holders, vests : PASGT, RBA, SPEAR, OTV (Arma1) and BHD

awesome , it's all fine from what i see. Helmet doesn't really bother me at all, it's not a big deal.

what would be cool is if you did DBDU's

http://rpmedia.ask.com/ts?u=/wikipedia/commons/thumb/9/9f/187infwpresbush1993.jpg/120px-187infwpresbush1993.jpg

like that, but without bush's white dress pants heh.

also for the guy with the PASGT vest, perhaps a DBDU vest cover? just instead of woodland, dbdu.

can't wait for the update, thanks for your work vilas

[vilas 474]

i will be doing VBA 88 (next Alice) and i get some photos on PM from USA, so i will rework webbing of those soldiers

RBA soldier will have both Alice classic and mk. 88 webbing

SPEAR will have LCBW (if i use correct names)

[lennard 447]

Cool stuff Vilas!

When you rework the ALICE gear, you might want to use BIS textures.

[vilas 474]

wip (more details will be added)

http://img7.imageshack.us/img7/9005/lbvl.jpg

is it okay ? (pouches will be woodland too)

if people who know American gear accept it i can carry on (LVB 88 on RBA)

[Fox '09 14]

Not sure if you know, but the pouches are preplaced, ie, not molle.

they go in this order as well:

Top - double mag pouch (30 rnd)

Middle- single mag pouch (30 rnd)

Bottom - grenade pouch

here's some pics of my lbv88 if you need some more refs