ACE3 - A collaborative merger between AGM, CSE, and ACE

[AlexBlob 16]

The one in ACE is a lot more restrictive then EM. It will only allow to climb low objects and not vault walls like in EM. 

[Alwarren 2767]

2 hours ago, Mirek said:

Quick question. I noticed that ACE now has the wall climbing like enhanced movement had.  But it doesnt sem to work.

While i was using EM it worked ok, and when i learned that it is implemented in ACE i stoped using EM, but it doesnt work in ACE any wall that i used to be able to climb now gives me "you cannot climb here" should i start using EM again? or is this looked into?

 

I don't think ACE Climbing allows you to climb over walls. It allows you to climb onto small obstacles like HESCO blocks and really small buildings, plus they must have a roadway LOD IIRC.

[Mirek 166]

Ah ok back to EM then.

[jonpas 294]

5 hours ago, Mirek said:

Quick question. I noticed that ACE now has the wall climbing like enhanced movement had.  But it doesnt sem to work.

While i was using EM it worked ok, and when i learned that it is implemented in ACE i stoped using EM, but it doesnt work in ACE any wall that i used to be able to climb now gives me "you cannot climb here" should i start using EM again? or is this looked into?

 

It is nowhere close the same thing. ACE3 climbing only allows you to climb obstacles below your height (waist-height or something like that).

[Alpine_gremlin 13]

Hello guys, I have a question regarding the incapacitation system.

 

I am making a simple PvP TDM scenario using ACE. Unfortunately when players shoot at each other, rather than dying immediately, the player enters the revive state. Since the game considers them to be captive in this state, the killer doesn`t get any points for his team. Is it possible to completely remove the incapacitation without removing ACE medical, just having players die once they`ve recieved too much damage? I have tried disabling revive with the specific revive module but that didn`t seem to work. Any suggestions would be appreciated!

 

Cheers!

[strider42 64]

Deleted. answered by @jonpas

https://forums.bistudio.com/forums/topic/193161-ace3-a-collaborative-merger-between-agm-cse-and-ace/?do=findComment&comment=3254324

[Mirek 166]

3 hours ago, jonpas said:

It is nowhere close the same thing. ACE3 climbing only allows you to climb obstacles below your height (waist-height or something like that).

Thats sad. 

[ab_luca 24]

hello!

now that asr ai pbo are splitted have you any suggestion to use that mod correctly with ace3?

[munger 25]

Hello. Apologies if this has come up before but I couldn't find anything.

 

I see here that an option was added to be able to zero scopes in Ace like it is done in vanilla. How do I do this? The linked page doesn't make it clear. Thanks.

[Rich_R 1087]

Haven't seen this mentioned but getting some strange stuff happening with ACE.

• The following was tested with Vanilla and only ACE CBA running
• Downloaded the latest versions from the Ace website

When shifting stuff around in the gear, or starting with a UAV controller in my inventory, get the following

 

 

When flying the drone (falcon) the HUD and other onscreen info disappears as seen below

 

 

When running ACE, the HUD's weapon info disappears.

 

I'll put a bug report in.

 

I have gone back a few pages in this thread and apologies if this has been discussed. Full disclaimer, I was out of the Arma world for a month while my computer died and was replaced.

 

Thanks!

[Mirek 166]

5 hours ago, Rich_R said:

 

 

 

 

Seeing this every time i start mission.

[loopdk 92]

Me to

[bolo861 166]

1 hour ago, Mirek said:

Seeing this every time i start mission.

 

This bug is essentially false positive reporting by arma engine. Here it is:

 

https://github.com/acemod/ACE3/issues/5833

 

It should be fixed anyway.

 

If not here s temporary fix:

 

 

[Rich_R 1087]

16 hours ago, Rich_R said:

Haven't seen this mentioned but getting some strange stuff happening with ACE.

• The following was tested with Vanilla and only ACE CBA running
• Downloaded the latest versions from the Ace website

When shifting stuff around in the gear, or starting with a UAV controller in my inventory, get the following

 

When flying the drone (falcon) the HUD and other onscreen info disappears as seen below

 

When running ACE, the HUD's weapon info disappears.

 

I'll put a bug report in.

 

I have gone back a few pages in this thread and apologies if this has been discussed. Full disclaimer, I was out of the Arma world for a month while my computer died and was replaced.

 

Thanks!

 

The hot fix released today fixed that error message. As for the missing HUD, well.............user error  I guess the choices in the Ace Options menu don't mean what I think they do.

 

Apologies for the confusion.

[Mirek 166]

Human is a mistake making species, no need for apologies for honest mistakes.

[acemod 312]

ACE Version 3.12.0 Released

Requires CBA Version 3.5 or later

and Arma 3 Version 1.78 or later.

 

This release

• marks the switch from ACE Settings to CBA Settings,
• integrated ShackTac Night Vision,
• custom ACE Arsenal,
• Weather rework, Arma 3 v1.78 compatibility fixes
• and various other improvements, optimizations, bug fixes and more!

 

Change Log Summary can be viewed on GitHub Here.

[yxman 90]

nice, so much stuff to play around, thanks for the release!

[acemod 312]

ACEX Version 3.3.0 Released

Requires ACE Version 3.11 or later.

 

This release

• added Fortifications
• added languages translations
• and a number of bug fixes!

 

Change Log Summary can be viewed on GitHub Here.

[ski2060 167]

Aweee yeah!  Already digging in to it!

[4-325Ranger 62]

Hi,

 

Just to clarify after reading the ACE wiki. As the mission maker, once I go into Eden Editor >> Settings >> Addon Options - do I need to click (fill) the box in the Overwrite Clients column if I want that mission setting to apply to all clients on the mission? I notice several are already greyed out in that column, but not all. I'm guessing this is an easy yes, but I figure I'd ask just clarify. Thanks!

Edited December 21, 2017 by 4-325Ranger
Nevermind, I see the Server, Client, Mission tabs - think I got it now

[road runner 4344]

ACE arsenal fucks up the VA load outs created in the EDEN editor, you have to start all over again.. PITA.
Any way you can incorporate the load outs already created? If not how can you disable this particular feature?

[rekkless 240]

I'll throw my question in here.

Personally I love that all the ACE settings are now part of CBA. It is absolutely fantastic. I now don't need to worry about mission makers messing around with the modules in our mission framework.

 

Two questions however, since the ACE medical system settings are now part of CBA does this mean we can switch between Prevent Instant Death and Revive on the fly? We like to play with PID when we have over 25 players and have Revive on with 3 lives when we have less than 25 players. So can this be done now on the fly at the start of the mission simply be editing the ACE 3 CBA settings on the server and overwriting the mission settings?

 

Second question, Where have the interface settings gone? Particularly where you could set the ACE menu to lists, keep the cursors on the screen, make the pain effects different??

 

Other than that, a fantastic update.

 

Prevent Instant Death however makes you pretty god damn durable haha

 

[Broseph_Stalin90 72]

So what is ACE Arsenal? I'd just rather make sure it doesn't override my current arsenal compositions in the editor before I update.

[xxgetbuck123 945]

1 hour ago, road runner said:

ACE arsenal fucks up the VA load outs created in the EDEN editor, you have to start all over again.. PITA.
Any way you can incorporate the load outs already created? If not how can you disable this particular feature?

 

Agree, I have a whole mission worth of loadouts I need applying but now I how to import and export code rather than just load em up. 

 

However I do love the ACE Arsenal, very nice UI and overall look. 

[road runner 4344]

Just now, Red Partisan said:

So what is ACE Arsenal? I'd just rather make sure it doesn't override my current arsenal compositions in the editor before I update.

Sadly it does, as soon as you open EDEN, and edit a character, it's the ACE Arsenal, and it's empty, it's quite off putting when you had 50-100 different load outs created in the VA.