Zee - M107 - announcement

[zeealex 2029]

Hiya Guys long time no see! :D

I'd like to present to you a WIP standalone project currently being worked on and nearing completion: the M107 LRSR/SASR

you may have seen a similar model on the RHS facebook page, well, it's exactly the same model, but wait! don't panic! I made the model and textured it, and I've been informed I'm free to release my works standalone as and when :) I wanted to release the M107 standalone for those who just want an M107 without having to download 2gb of files, even though RHS is FREAKING AWESOME, not everyone has amazeballs internet. It also means I can really go to work on the textures and add a lot of camo variations, comedic twists and extra accessories over time, without fear of clogging up or going off scope in an otherwise pretty conservative addon. 

 

The M107 pack may be the entry point of a new sniper rifles pack too, provided I can get long term support from the gang, there's an AMP DSR-1 in the works, I'll post WIP's below and I'll see what you guys think about expanding the addon.

Basically all it is that needs doing is the config and a few extra camos, I've had to call in support from my good friend MistyRonin and reyhard, because they're awesome at configs aaand I really suck :P


Features: 
M107
-Well, the rifle might help at this point
-Deployable Bipod and animated backup sights

-Compatibility with vanilla and Addon scopes

-A Variety of Camouflage patterns available from the get go
-Customizable with base textures and wear templates provided as necessary
-Oh yeah, did I mention the barrel recoils?!

NOTE: Premier scope in the renders will be available only with RHS: USAF and isn't part of the pack as of yet, it is mine, but I didn't wanna yank the whole thing out and release it all standalone

DSR
- The Rifle
- Urban, Woodland and Desert Paint schemes
- Suppressor
- Deployable Bipod

 

 

Credits so far:
MistyRonin - configs
Reyhard - configs
RHS in general - putting up with me and more to the point helping me get this damn far. 

Wilco and the muhreen coorrps - References


Renders (REALLY high res, sorry):







(NSFW)






In Engine (RHS config)

 

 

 

AMP DSR-1:



 

 

 

M24:




Projected Extensions:
 

Weapons:

 

M110 + suppressor

Mk13 MOD 0/L96 + suppressor

Cutsom M14 with VLTOR stock and full side rails. 

H+K PSG-1

Stripped DSR + suppressor
DSR Long Barrel

Barrett M82 pre A1 (with raised short rail and round muzzle brake)

Barrett M99

Barrett M107A1

Custom M24

OBR SM Tarnow Bor - A Polish 7.62mm Bullpup Sniper rifle with a full free floating barrel - also called ALEX

 

Scopes:

Premier Heritige 5-25x/M8541A SSDS 

Tangent Theta 5-25x

Leupold Mk6 6x

AN PAS 13C Heavy

AN PVS 10
AN PVS 27

Thanks!

zee

[Jimmakos 168]

Nice work,

What's the excact polycount on the m82 and the texture sheet size? just out of curiosity..

I also had habituate the Barrett to be accompanied by a Leupold Mark 4 but the NXS scope looks good also.

You just made me thing the days i was working on my M95, pff just those days!

[zeealex 2029]

thanks! the point count is 8,126, with slightly more on the one with a cloth wrap around it, face count is 8,649 :)

I was working from USMC photos and they used a premier heritige 5-25x 56mm scope, so I just made that one XD I can make a mk4 for sure :)

you worked on an M95? dapper!

[khaosmatical 237]

Very impressive model Zee!

[officeramr 269]

Holy crap! That looks amazing, cant wait to pop heads at range with that beast 

[delta3242 399]

Will there be different hand placement animations for the M107 or is that too advanced for Arma? I know you can hold it differently in the first picture but I think it looks cool like this. For example these pictures:

[ineptaphid 6413]

Oh baby! Look at that thing! I have been using the one ported from Arma2 in Massi's pack and CUP-but this...this is a whole other level of awesome. Can't wait to hear the boom from this cannon :)

 

Also-regarding the DSR you mentioned, i would love to see a good version of it in game. Arma could do with a few more lighter marksman rifles than it currently has.

[cosmic10r 2331]

That premier heritage is amazing Zeealex. .. those are very very nice optics Irl. Would love to see a tangent theta from you one day :)

[slatts 1978]

I'm brave enough..

[AIF_Infantrymen 264]

i do hope it has AP and HE round B)

[HitmanTwoActual 188]

I'm brave enough..

 

God damn I love you  :D

[shomu1 193]

OH.  MY.  GOD.  This is AMAAAAAAAAAAAZING.

 

 

Also yes +1 for the DSR.

[malcom86 33]

This is simply amazing !!!!

Am I wrong, or in the forth picture...that's a Krytek camo ?? Wow, can't wait to see this. I'll probably use the RHS version though as those mods are must-have for me.

 

I'm brave enough too....

 

Great job Zee, I felt you were working on something !!! it's so great to have you back :dancered:  !!

[jackson1127 5]

It's nice to have premier heritige (M8541A)scope :) 

most of USMC M110 use this scope.

[roberthammer 582]

Nice work Zee and also interesting idea
now about those suggestions :
 
- do you plan to do all 3 DSR variants?
 
- do you plan doing the Barrett M95 and the "famous" XM109?
 
thanks and good luck with your project :)

[zeealex 2029]

Hey guys, sorry for the late reply.

Thank you all very much for the kind words! I appreciate them a lot! :)

With regards to handanim, I would have to ask a scripting guru, but it may be possible to strongarm it into a script.

@malcom hey buddy! Thanks! It's been a while, it's not kryptek it's actually a blurred M81 camo with snake skin overlayed on top :)

I can definitely look into the DSR variants and the two Barretts for sure no promises! :)

Now, unfortunately the PC died, again... Wooo, not, the hard drives, I think, are salvageable, so data loss should be minimal. However I've just had to fork out over £450 for parts, if anyone has it in their hearts to donate to a broke student like me to help foot the bill, please do, I'd appreciate it very much, however theres no major pressure on anyone to do so, I hate begging at the best of times but this kinda punched me in the face a little.

The PC shouldn't affect the release of the M107 as I thankfully have the raw files on an EHDD, and the config will take a while, you will certainly have it in the next RHSUSF version, however I can't say with certainty about the DSR.

[Foxone 1044]

Fantastic work Zeealex, they both look amazing, cant wait for these to come out!

Keep it up!

[AveryTheKitty 2626]

M107 looks nice, but...

 

DSR-1 <3

[EricJ 763]

Agreed that DSR-1 is nice...

[john111 76]

Could we get the Silenced version?  Pretty cool and usefull ingame...

[zeealex 2029]

Awesome, so when I'm back in action, I'll get that DSR done up and ready.

I can certainly see about a silencer for sure, it would mean the muzzle has to be configured differently

[war_lord 934]

Could we get the Silenced version?  Pretty cool and usefull ingame...

I doubt a Suppressed M107 would be very useful, it's still an incredibly loud gun. In real life the main reason you'd suppress a 50 would be for user comfort, it's still not anywhere near "Silenced".    

[cosmic10r 2331]

I doubt a Suppressed M107 would be very useful, it's still an incredibly loud gun. In real life the main reason you'd suppress a 50 would be for user comfort, it's still not anywhere near "Silenced".    

 

 

https://www.youtube.com/watch?v=ndbfj-Jk0To

[war_lord 934]

There's this little thing called a sonic boom that means that no matter how matter what you do at the muzzle end, the sound of that .50 BMG flying through the air at 2,800 fps is going to make a sound that makes it very clear that someone is sending rounds your way. Again useful for a civilian shooter, but in terms of an actual battlefield, it's not making a whole lot of difference. Further, you don't get a good idea of how loud a weapon is from a camera microphone, you'd need to see a decibel readout, and they're not going to give you one on their marketing video. The M107 is a decidedly unsneaky weapon.

[cosmic10r 2331]

 

To add a little more, there are basically three components to the sound of a firearm.  First, the actual report of the gun caused by gas being released from the barrell.  This is a "boom" or "crack" sound.  This sound is very loud near the fired gun, and falls off following the inverse square law the further you get away.  At even 20 yards or so it's not all that loud. (For most guns)

The bullet passing through the air makes one or two additional sounds.  First, if the bullet is supersonic, it will create a sonic boom...  This isn't really a boom, however, it's more like a 'crack' or 'snap' sound.  The other sound is a sort of buzzing sound, often compared to an angry bee.  If you hear this, you are probably in trouble.

 

 

It will entirely depend on the type of ammo used...