Yoma 0 Posted December 10, 2009 By the way the default servers are updated Q. I kind of left the older CAA1 in it as i suspect that at least *someone* will be asking for onestep full download too. Share this post Link to post Share on other sites
Roe-31stMEU- 10 Posted December 11, 2009 (edited) Ok, so I just downloaded the CAA1 - Full - ClassicPlants. Is this all I need to run say for example Sahrani? Cuz I just tried and I get CTD's with any forms of Sahrani or Rahmadi... Porto works fine, Avgani works fine, Afghan Village works fine... but I get a CTD with any of the originals from ArmA.... I also DLed the OAC Core and have already had previously the CBA for other mods. Hm... I dunno wat I fixed but it works now... nvm :) Edited December 11, 2009 by Roe[31stMEU] Share this post Link to post Share on other sites
[GLT] Legislator 66 Posted December 11, 2009 @Roe[31stMEU]: I had the same issue with two different ArmA II installations. I guess one of the latest beta patches messed something up. I did a total CAA1 update yesterday. Still there is an error message appearing and my SLA units are listed twice in the editor with two SLA factions. Somehow the faction classes are conflicting. I'll deliver my RPT today if I have the time to do so. Share this post Link to post Share on other sites
vengeance1 50 Posted December 11, 2009 Has the URL for Yoma been changed? Doesn't work anymore? Share this post Link to post Share on other sites
mr_centipede 31 Posted December 11, 2009 Is the CAA1 addon sync server down? :( It is back again very soon. I guess that answer your question... Share this post Link to post Share on other sites
johncage 30 Posted December 11, 2009 does this need arma 1 and queen's gambit? none of the arma 1 maps show up for the editor and a custom map keeps asking for ca_plants. Share this post Link to post Share on other sites
rubberkite 19 Posted December 12, 2009 does this need arma 1 and queen's gambit?none of the arma 1 maps show up for the editor and a custom map keeps asking for ca_plants. This doesn't need ArmA 1 and QG You miss something in your CAA1 installation, If your installation is right, you'll see the arma 1 island in the editor check it and try again Share this post Link to post Share on other sites
rubberkite 19 Posted December 13, 2009 Any news about the server ??? Kyu you sell it to pay a dinner to a beautifoul girl ? If yes I hope you've done... something interesting if not for all the remaing things there is mastercard.... :) Share this post Link to post Share on other sites
clawhammer 10 Posted December 13, 2009 Any news about the server ???Kyu you sell it to pay a dinner to a beautifoul girl ? If yes I hope you've done... something interesting if not for all the remaing things there is mastercard.... :) can confirm this, the server is down. Any news whats going on? Share this post Link to post Share on other sites
.kju 3245 Posted December 13, 2009 You can get the (new) different CAA1 servers via 'Default servers'. Once the documentation is complete the public announcement will happen. Share this post Link to post Share on other sites
rubberkite 19 Posted December 13, 2009 How is gone the dinner ? :cool: Share this post Link to post Share on other sites
sommergemuese 0 Posted December 13, 2009 Hello! I can't play on CAA1 Islands ... only QB Ones :( And one Question I downloaded CAA1 through Yoma ( http://caa1.arma-creations.com/yas/caa1/caa1-full-autumn.7z ) but the file strucur isn't working with x\caa1;x\oac\oac_core ?! I copied all addon Folders from the caa1 Subfolder to Caa1... ( arma2\x\caa1\addons\caa1_w_desert.pbo for sample) .. is that right?! Arma2.exe Crashes, when I try to enter Editor or Single Player Mission on Sahrani and the other Arma1 Isle. I'm using latest Patch and latest Beta Patch. Please help me :) Share this post Link to post Share on other sites
.kju 3245 Posted December 13, 2009 acti0n best to wait until the updated docu is finished. It should be done in the next view days. Share this post Link to post Share on other sites
kroky 1 Posted December 13, 2009 @kju Since the ACE guys dont have much time to deal with this problem, please have a look at it kju. When running @CBA, @ACE, @ACEX, the mission Commander (on Sahrani, with CAA1 of course) crash. Please try it and look if it works for you. Share this post Link to post Share on other sites
.kju 3245 Posted December 13, 2009 So a team of 20+ people has less time than one guy? Share this post Link to post Share on other sites
kroky 1 Posted December 14, 2009 So a team of 20+ people has less time than one guy? Cant judge about that. The fact is, that after posting this bug in the ACE forums twice, there was no reaction from the ACE team. Share this post Link to post Share on other sites
.kju 3245 Posted December 14, 2009 So without ACE it crashes too? Share this post Link to post Share on other sites
lNTRUDER 26 Posted December 14, 2009 @kjuSince the ACE guys dont have much time to deal with this problem, please have a look at it kju. When running @CBA, @ACE, @ACEX, the mission Commander (on Sahrani, with CAA1 of course) crash. Please try it and look if it works for you. Hi Kroky, What does your target line look like? Are you loading CAA1 before ACE or vice versa? Share this post Link to post Share on other sites
kroky 1 Posted December 14, 2009 So without ACE it crashes too? No without ACE is work ok. Even if I put a hundred of mods it still works ok. @Intruder I tried to load ACE before after and in the middle. It doesnt matter as soon as ACE is loaded it crashes. Share this post Link to post Share on other sites
Herr_kalashnikov 10 Posted December 14, 2009 Is it a specific mission u are crashing on, or is it a specific gamemode (sp/mp)? Not presicly sure what u mean with 'mission commander', i supose u mean the guy starting the mission. Personaly i run this shortcut %arma2dir%\beta\arma2.exe" -mod=beta;x\caa1;x\oac\oac_core;@CBA;@ACE;@ACEX Works without any glitch sp and mp. Share this post Link to post Share on other sites
TBuck 10 Posted December 14, 2009 @ TBuck1) ArmA II engine issue - called Z fighting. 2) Non perfect texture replacement, I still like it a lot. You can use the standard vegetation this way. 3) I guess that it a problem with the custom object from OPX. Nothing we can do. About your rpt: a) Update CBA to 0.2.0. b) Most message are warnings/for information. Nothing serious. c) Most warnings by OPX cannot be sorted. d) For CAA1 the warnings will be reduced as community tools become available to do so. Thanks for your report. In the future please create a ticket for each issue in the CAA1 project space. Cheers! Hi kju, I fixed all my problems. The biggest one was a mistake by myself. There was a â€;†at the end of the command line after the oac-directory. Now i have no errors ;). I also updated the CBA to 0.2.0 . The Problem with the bushes i fixed with the plantsclassic-repacment. Thx Tino Share this post Link to post Share on other sites
kroky 1 Posted December 14, 2009 Is it a specific mission u are crashing on, or is it a specific gamemode (sp/mp)? Not presicly sure what u mean with 'mission commander', i supose u mean the guy starting the mission.Personaly i run this shortcut %arma2dir%\beta\arma2.exe" -mod=beta;x\caa1;x\oac\oac_core;@CBA;@ACE;@ACEX Works without any glitch sp and mp. Ok, then open with this target line the mission called commander its the 9th official mission from ArmA I and try to start it. I tried with the same target line, no luck crashes always only on this specific mission. Dont know why. Thats why Im asking for help. Share this post Link to post Share on other sites
Herr_kalashnikov 10 Posted December 14, 2009 Oh u ment the mission named commander :) I released a pack of converted A1 scenarios a while back, not sure if u trying it from that release or that u are using the originals? The reason i converted them is that not all missions work striaght out of the box they need a little finetuning. Tested that mission and it works correctly here , no crash. If u dont have the converted ones take a look here.. http://dev-heaven.net/boards/26/topics/show/1669#message-1860 Share this post Link to post Share on other sites
kroky 1 Posted December 14, 2009 (edited) Oh u ment the mission named commander :) I released a pack of converted A1 scenarios a while back, not sure if u trying it from that release or that u are using the originals? The reason i converted them is that not all missions work striaght out of the box they need a little finetuning. Tested that mission and it works correctly here , no crash. If u dont have the converted ones take a look here.. http://dev-heaven.net/boards/26/topics/show/1669#message-1860 Im using the missions that came with the oac pack. Hmm will try the ones from your link. Thank you! Hopefully it works. I will report later. EDIT: Im back, and yes it works. It turned out that I had exactly your converted missions! I downloaded them again and voila it works. Apparently they went corrupted somehow. Before I was using ACE it worked well...hmm. Never mind now it works even with ACE. Thank you for your help and for converting this great ArmA1 mission. I really enjoy them even when playing them for the 20th or more time. Its cool to see how the mods like ACE SLX JTD and so on, make the same mission play totally different. @kju You are released...:) Edited December 14, 2009 by Kroky Share this post Link to post Share on other sites
.kju 3245 Posted December 14, 2009 Wohoo :D Glad to hear Kroky and thanks Herr AK. :) @ TBuck Good to hear your success too! Share this post Link to post Share on other sites