Jump to content

Recommended Posts

7 hours ago, warden_1 said:

Needless to say I will find a way to do it eventually, but I only do these pattern scans when my bluescreen setup is taken down. Lately it has been up as I have been getting the scan process for helmets nailed down, which if you check the reddit page and compare the new scans to the old ones you will notice they are significantly better all the way down to the embossed size label on the inside of the opscores... all of this takes a lot of trial and error. For further updates and info I post fairly often about this side of the mod here.

 

dLZExZa.png

 

Holy Cow!! You guys are scanning stuff! I have never seen such a dedicated team of modders. You guys rock. The community can finally have a top notch, legit and handcrafted mod. Hopefully, people will use this mod and stop circulating and flooding the community with stolen and ripped content (mostly the chinese crap). Good luck team.

  • Like 4
  • Thanks 1

Share this post


Link to post
Share on other sites
30 minutes ago, Shanil said:

One more question if you don't mind. Are there any plans to add retention lanyard to the pants?

 

Yes, we do have plans to eventually add forms of retention lanyards to certain pants.

Share this post


Link to post
Share on other sites
18 minutes ago, markoef said:

 

Yes, we do have plans to eventually add forms of retention lanyards to certain pants.

Cool

Share this post


Link to post
Share on other sites
6 hours ago, markoef said:

 

No clue, stuff gets released when it's ready and we feel happy putting it in. There is no saying in when specific stuff gets in, and even if we knew we wouldn't go in on it.
We're hoping to release more stuff soon (remember everyone has a different impression of 'soon'). But we have a lot of work ahead in fixes as well as other stuff that we want to implement in terms of compatibility.

 

Totally understandable, especially with a project like this one. Can't wait to see what you guys come up with, thanks for all your hard work.

  • Like 1

Share this post


Link to post
Share on other sites
14 hours ago, warden_1 said:

 

Please stop commenting on stuff you have no clue about, it isn't useful. When the patterns are final they will be color corrected to reflect the real life patterns in various materials and in some cases worn/dirtied slightly. If they still stick out at that point then you'll probably have to just play a different map or use an alternate MC pattern.

 

I'm talking about the photos you guys posted! Where are you guys getting your Multicam from?

Share this post


Link to post
Share on other sites
6 minutes ago, Fros7bite said:

I'm talking about the photos you guys posted! Where are you guys getting your Multicam from?

It probably sticks out in that picture so bad because of the pretty extreme depth of field...

Share this post


Link to post
Share on other sites
9 hours ago, Shanil said:

One more question if you don't mind. Are there any plans to add retention lanyard to the pants?

 

Yeah, a Yates PRL with a Kong QD. This is the mid poly model OMA made, its pretty nice.

 

download.png1288184_image.png

 

 

 

2 hours ago, Fros7bite said:

 

I'm talking about the photos you guys posted! Where are you guys getting your Multicam from?

 

The current MC was created from some higher resolution photos of the pattern Crye released.

 

 

9 hours ago, Shanil said:

 

Holy Cow!! You guys are scanning stuff! I have never seen such a dedicated team of modders. You guys rock. The community can finally have a top notch, legit and handcrafted mod. Hopefully, people will use this mod and stop circulating and flooding the community with stolen and ripped content (mostly the chinese crap). Good luck team.

 

Thanks, I hope one day people aren't stealing content left and right... but sadly I think thats a tad too optimistic as long as its seen as acceptable by most of the community.

  • Like 7

Share this post


Link to post
Share on other sites
On 9/29/2018 at 6:31 AM, marek1986 said:

Please, dont forget about vests with 2 Falcon III radios.

 

We didn't forget:

xk5Q_8dv7_Lx66uPp36-h_30k3dlvtA5rH0GZtRb

More renders at the usual locations.

  • Like 16
  • Haha 2

Share this post


Link to post
Share on other sites

G'day @Siege-A,

Are you guys still planning on allowing different pouch configurations on the vests/plate carriers through the use of hidden selections and configs?

 

  • Like 1

Share this post


Link to post
Share on other sites
4 minutes ago, wansec_6 said:

G'day @Siege-A,

Are you guys still planning on allowing different pouch configurations on the vests/plate carriers through the use of hidden selections and configs?

 

Absolutely. Of course there are limits to how involved that will be, since we can't just let everyone hand place things where they want. So its more or less going to be a bunch of hiddenSelections on a preconfigured loadout (loaded to the max), where players can hide any of the pouches/accessories on the loadout that they would like to. Essentially building your own and making it as lightweight/less-cluttered as you need it to be. For a little example from the above setup, this is basically how much of it could be hidden down to the base version of that particular loadout (tourniquet can be hidden as well). 

 

4wJVemOGz82FiwFa5X1BkA1OPlQfJNJkqTH9GUIx

  • Like 12

Share this post


Link to post
Share on other sites

Impressive stuff.

 

Especially those helmet scans!

  • Like 1

Share this post


Link to post
Share on other sites

G'day @Siege-A,

 

That's great news. I love the idea so far. Looking forward to setting up my own loadouts. ARMA3 Dress-up just got so much better!!!😁

 

  • Like 3

Share this post


Link to post
Share on other sites

I don't if this has been asked before, but do you guys plan on adding wound textures for the uniforms?

Share this post


Link to post
Share on other sites
On 8/8/2019 at 4:38 AM, uzabit said:

I don't if this has been asked before, but do you guys plan on adding wound textures for the uniforms?

 

For sure, just haven't gotten around to it yet.

 

 

All kinds of upgrades for the NVG's by the coming update, as well as a few new sets to add to the mix. Really good stuff. Here's a quick rundown of the additions and their credits:

  • PVS-14 model by Warden_1, with modification by Foxone.
  • Mini N/SEAS model by Warden_1.
  • PVS-15 model by Lennard, with modification by me.
  • New custom NV Scope views created by Dirks and myself.
  • Lyy Amao has also created numerous LODs for our current NV sets for optimal performance.

As always, drop by our subreddit to check out more renders.

JqV7FX4.pngpkvIkMF.pngwOcxRFn.png2eTZone.png

New (WIP) NV Scope views which have been incorporated on all corresponding sets:

2k3Ot2t.pngMM4YGc4.pnggSon0Zf.png

 

And lastly we have a new MICH2000 model created and contributed by Zeealex.

cC0ntBJ.png

  • Like 22

Share this post


Link to post
Share on other sites

I love the spray painted textures zeealex does. Sabre as well love his spray textures.

  • Like 1

Share this post


Link to post
Share on other sites
On 8/6/2019 at 5:23 PM, Siege-A said:

 

Absolutely. Of course there are limits to how involved that will be, since we can't just let everyone hand place things where they want. So its more or less going to be a bunch of hiddenSelections on a preconfigured loadout (loaded to the max), where players can hide any of the pouches/accessories on the loadout that they would like to. Essentially building your own and making it as lightweight/less-cluttered as you need it to be. For a little example from the above setup, this is basically how much of it could be hidden down to the base version of that particular loadout (tourniquet can be hidden as well). 

 

 

 

Sorry for the dumb question, but I might be slightly out of the loop. Is the hiddenSelections feature already a thing, or something that's going to be implemented later? I've just never heard of it before, have I been missing out on something?

Share this post


Link to post
Share on other sites

While I wait for another Maritime I will be trying to get some of the easier pouches and shoes scanned. Here is an example of a finished scan without the high res texture:

bMzxtFz.png

  • Like 16

Share this post


Link to post
Share on other sites
10 hours ago, Ghost19 said:

Will you add ACE compatibility for the NVG ?

I believe that the above images are of ace compat in play. Just like normal ace nods, you can see people in the dark outline, just barely. (white VR men)

Share this post


Link to post
Share on other sites
2 hours ago, Searing Star said:

I believe that the above images are of ace compat in play. Just like normal ace nods, you can see people in the dark outline, just barely. (white VR men)

No, This is not, it looks like but it’s a custom vision of the nvg made by USP team.

Share this post


Link to post
Share on other sites
On 8/15/2019 at 8:28 PM, Ghost19 said:

Will you add ACE compatibility for the NVG ?

What exactly do you mean with ACE compatibility for our NODs?

 

On 8/16/2019 at 9:51 AM, Ghost19 said:

No, This is not, it looks like but it’s a custom vision of the nvg made by USP team.

Yes, we made our own scopemodels for the NODs.

Share this post


Link to post
Share on other sites

Some incredible things in the works:

tBq9Ulu.png

  • Like 24

Share this post


Link to post
Share on other sites
17 hours ago, markoef said:

What exactly do you mean with ACE compatibility for our NODs?

 

Yes, we made our own scopemodels for the NODs.

I mean when NVGs have the Ace nvg scopemodels. 

Share this post


Link to post
Share on other sites
4 hours ago, Ghost19 said:

I mean when NVGs have the Ace nvg scopemodels. 

 

We have those right now, we are planning on changing them out for our own scopemodels.

  • Like 1

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×