Jump to content


  • Content Count

  • Joined

  • Last visited

  • Medals

  • Medals

Everything posted by maquez

  1. maquez

    Weird white thing while move

    do you use G-Sync from Nvidia or Freesync from AMD? if yes, this is called ghosting caused by the bad performance from the 12 years old Game Engine of Arma 3. solution to fix: disable G-Sync/Freesync
  2. maquez

    Arma 3 GeForce Now

    simple answer to this: won't help really search google for how to optimize game, there are several tutorials arround http://letmegooglethat.com/?q=how+to+optimize+arma+3+for+performance
  3. maquez

    Helicopters crash my game every time

    read: https://community.bistudio.com/wiki/Arma_3_Unusual_process_exit may help
  4. maquez

    Arma 3 crashes.

    apart of these startup parameters you should not use any others "-noSplash", "-noLogs" and the follow parameters do depend on your CPU architecture "-enableHT", "-hugePages" usually arma3 detects the correct values from the operation system by itself so there is no need to set them manually ! then disable all downloaded mods and try again if Arma 3 does start normally enable the downloaded mods one by one until you find the faulty mod which crashes Arma 3
  5. apart of these startup parameters you should not use any others "-noSplash", "-noLogs" and the follow parameters do depend on your CPU architecture "-enableHT", "-hugePages" many make the big mistake and do set in game options, crazy high view distances for a smooth and performant multiplayer experience you should not exceed the view distance over 2'000m - 3'000m, on very high populated servers you should go even lower feel free to use my settings as an example: I7 6700K - GTX 980 TI - ASUS Z170 Pro Gaming - HyperX Fury DDR4 2666MHz https://steamuserimages-a.akamaihd.net/ugc/259345425598111664/5D295E45ED230D12574C5A0263558A5270F3A17E/ https://steamuserimages-a.akamaihd.net/ugc/259345425598112430/A49941B22F76C9A9CEA66A13CA64194240EABA5E/
  6. do not use "-cpuCount" usually arma3 detects that value from the operation system so there is no need to set it manually
  7. maquez

    Vertical sync not working

    by the way Arma 3 runs not really smooth with vsynch enabled, fps can drop quite heavy depends on map location and mission design if your monitor has no configuration menu where you can set refresh rate try to force it with Nvidia Control Panel custom resolution: Nvidia Control Panel
  8. maquez

    Vertical sync not working

    try set your monitor to 59 or 60 hz, vsynch should work then
  9. what a shame ... 🙄 sorry buddy my fault, I somehow mismatched the zip files when I was updating sorry mate... may getting old 🤔
  10. I use Arma 3 Server installed on follow path: E:\SteamLibrary SSD\steamapps\common\Arma 3 Server if I point Server Executable to follow path: "E:\SteamLibrary SSD\steamapps\common\Arma 3" where my Arma 3 is installed it works if I point Server Executable to follow path: "E:\SteamLibrary SSD\steamapps\common\Arma 3 Server" where my Arma 3 Server is installed it does not work hope this helps did some further testing: mods do work but missions are still not found my missions are under follow path: "E:\SteamLibrary SSD\steamapps\common\Arma 3 Server\mpmissions"
  11. did you fix the problem that the tool finds only missions and mods if used in arma 3 root "...\steamapps\common\Arma 3\" ? because I use the arma 3 server from steam and the tool still does not find any mods or missions arma 3 server steam
  12. unfortunately if sever is installed other path than ...\steamapps\common\Arma 3\ the tool can not find sever mods and missions would be nice if you could fix that my server for example is installed ...\steamapps\common\Arma 3 Server\
  13. finally a very good replacement for TADST, well made comrade thank you very much for this useful server tool
  14. maquez

    Lagging with hard disk at 100%

    your CPU is way too weak to run game smooth and without huge framedrops
  15. maquez

    Port forward question

    security reasons .... portrange 2302-2305, 2x02-2x05... UDP Steam related ports port 2306, 2x06... UDP Battleye related port (different server location) do not open any non needed ports "TCP" (security reasons too) sure you could open the entire portrange from 0 up to 64738 TCP/UDP but this would be a very stupid idea Getting a Close Look at Firewalls what is a firewall (do work as a Cyber Security Consultant)
  16. maquez

    1.90 update - Troubleshooting

    this advice is a very stupid one your server would NOT be protectet against any cheats/cheaters... don't do that !!!!
  17. maquez

    1.90 update - Troubleshooting

    common BI, you serious ? you manage to break game (servers) for several customers and all what you do is tell us to use this shady "performance build" or rollback to previous build, to fix this problem... question, what about all steam costumers that NEVER will visit this forum? kind regards a customer
  18. maquez

    1.90 update - Troubleshooting

    how about a official released hotfix or rollback to 1.88 !?
  19. maquez

    Port forward question

    do NOT open portrange 2302-2306 TCP/UDP .... server wont show on serverbrowswer you need to open follow ports: portrange 2302-2305 UDP and port 2306 UDP
  20. maquez

    Pls help game crash 0x000000FF

    0x000000ff Error Codes are caused in one way or another by misconfigured system files in your windows operating system. make sure you don't have any viruses, trojans or any other malware in your system read this: How to fix 0x000000ff Error? (do NOT USE the (0x000000ff) repair utility tool) !!! and System File Checker tool use this method instead !
  21. maquez

    createPeer Failed No Severs Showing

    you need open portrange 2302-2305 UDP and singleport 2306 UDP on router
  22. open ports not needed or just because of inexperience can be risky... you need open portrange 2302-2305 UDP and singleport 2306 UDP on your router and make sure that UPnP is enabled and disable not needed windows firewall (a way more safe firewall already installed as a standard on most modern routers) or create a firewall rule for the arma3.exe
  23. maquez

    Arma lags too much, pelase help

    if you use arma 3 on a normal HD then make sure that you defragment that drive every time a arma patch is released this can and will help also for the problem you describe
  24. maquez

    Battleeye connection issues

    disable stupid windows firewall make sure you opened UDP port range 2302-2305 and port 2306 on your router