A319 & A320 v1.2 Release

[konyo 14]

A319 MPA & A320 MPA v1.3 Release

Ported by konyo

This new v1.3 Release of the A319 & A320, this fixes the problem with the transparent texture on the engine & the seating position of the co-pilot on the Gr & Lt variant.

Version 1.3 Changelog

Added: Contermeasures Memory Points.

Fixed: Co-Pilot position. (No longer sits above plane on Gr & Lt variant).

Fixed: Transparent texture on engine.

Version 1.2 Changelog

Added: Quite a few cfg entries that were not present to make the a319 more unique from Base Class Plane.

Added: BIS contermeasures and radar warning system.

Added: 2/ and 4rnd mags so wep/mag combo's can be used with the a319 weps/mags

Fixed: Armour values and added damageresistance values.

Fixed: Destruction model lock up (added class planewreck cfg entries)

Fixed: Units entires.

Fixed: Viewpilot adjusted.

Fixed: Required Addons entries.

Fixed: Boat and para boat scripts. (empty vehicles are needed in mission to not cause lag).

Fixed: Model cfg error(class defualt not defined).

Fixed: Wheel turning speeds and direction. Front small whell turns faster. Big rear wheels turn slower.

Fixed: 50% Fixed ECM Radar Jammer script. This an error stopping the ai from being created and/or moving them into driver.

Adjusted: Flight model to suit and added lift values based around c130 values.

Adjusted: Ammo and weps to suit longrange attacks.(thrust/time)

Removed: Custom Countermeaseure scripts.

Removed: Cfg entrys that werent needed.

Mirrors:

Armaholic.com

Armedassault.info

ArmA2Base.de

.

Edited October 4, 2011 by konyo
Added v1.3 links & info.

[PSYCHOSIM 0]

Nice, will try these.

[PacX 10]

Awesome. :D

Edit:

None of them work :/

Error: "Cannot open something/something.m3p"

Edited June 28, 2010 by PacX

[kheiro 10]

Looks good, Im going to download

[konyo 14]

Awesome. :D

Edit:

None of them work :/

Error: "Cannot open something/something.m3p"

m3p? :confused: Whats the whole line of the error message say, and ill have a look into it for you. Meanwhile try deleting and re-installing to see if that works?

Edited June 28, 2010 by konyo

[PSYCHOSIM 0]

Causes a ctd, so have been unable to try...............

[konyo 14]

Causes a ctd, so have been unable to try...............

CTD? :confused:

[sethos 2]

CTD? :confused:

"Crash to Desktop" :)

[konyo 14]

"Crash to Desktop" :)

Ohhh lol, @PSYCHOSIMwhat model are you loading? & dose it give you a error message?

[imutep 0]

Very nice! Thx for the release! :cool:

ArmedAssault.info Mirror and News:

We have also added this release to your personal author profile

If a release or contact information is missing, feel free to drop a PM, it will then be added.

And here is the BBCode if you want to add our Mirror to your release post :

[url=http://www.armedassault.info/index.php?cat=addons&game=1&id=1464][img=http://www.armedassault.info/mirrorgen2/4619972.gif][/url]

If you prefer a text only BBCode please copy and paste the code below :

[b]ArmedAssault.info Mirror :[/b]
[url=http://www.armedassault.info/index.php?cat=addons&game=1&id=1464]DOWNLOAD - Airbus A319 & A320 (v.beta) - [15 MB] from ArmedAssault.info[/url][/spoiler]

Edited June 28, 2010 by Imutep

[mandoble 1]

Same problem and CTD here:

Warning Message: Cannot open object a319mpa\a319mpa.p3d

Error: bin\config.bin/CfgVehicles/A319MPA/Turrets/mainTurret/: Turret body mainTurret not found while initializing the model a319mpa\a319mpa.p3d

Error: bin\config.bin/CfgVehicles/A319MPA/Turrets/mainTurret/: Turret gun mainGun not found while initializing the model a319mpa\a319mpa.p3d

Warning Message: Cannot open object a319mpa\exocet.p3d

Warning Message: Cannot open object a319mpa\exocet_proxy.p3d

a319mpa\a319mpa.p3d: No geometry and no visual shape

a319mpa\a319mpa.p3d: No geometry and no visual shape <- more than 20 of these lines in the RPT

This was just placing an Fr one on the map and starting the mission from the editor.

Note: A2 1.07

[Bartchie 10]

Same here.

[Nightrain 10]

Release frontpaged on the Armaholic homepage.

A319 and A320 Airbus Beta

[konyo 14]

Same problem and CTD here:

Warning Message: Cannot open object a319mpa\a319mpa.p3d

Error: bin\config.bin/CfgVehicles/A319MPA/Turrets/mainTurret/: Turret body mainTurret not found while initializing the model a319mpa\a319mpa.p3d

Error: bin\config.bin/CfgVehicles/A319MPA/Turrets/mainTurret/: Turret gun mainGun not found while initializing the model a319mpa\a319mpa.p3d

Warning Message: Cannot open object a319mpa\exocet.p3d

Warning Message: Cannot open object a319mpa\exocet_proxy.p3d

a319mpa\a319mpa.p3d: No geometry and no visual shape

a319mpa\a319mpa.p3d: No geometry and no visual shape <- more than 20 of these lines in the RPT

This was just placing an Fr one on the map and starting the mission from the editor.

Note: A2 1.07

Same here.

Hmmm ok, stupid enough of me, i never tested on the new 1.07, im stilling running 1.05 :/ That may be causing the problem :confused:

[Keshman 10]

who tested A319 and A320 you fly normal? Have plane? game no crash? :(

or just i not lucky (test Arma2 1.07 normal and + ACE and + OA)

[konyo 14]

who tested A319 and A320 you fly normal? Have plane? game no crash? :(

or just i not lucky (test Arma2 1.07 normal and + ACE and + OA)

Sorry i dont get what you mean.

[darkxess 60]

Release frontpaged on the Armaholic homepage.

A319 and A320 Airbus Beta

Nothing bad against you doing everyone good Nightrain, but why release it when clearly everyone here is saying there is something wrong with it! lol... so obviously its going to be fixed then released again.

Em... waste of time, space :butbut:

[Keshman 10]

I think (I do not have aircraft in game! have in editor) it's because I use the latest patch 1.07 for Arma2!( My friend tested your plane in Arma2 1.05 and all work normal)

this is still beta! I think in the future it will work correctly :)

[fighterman 10]

crashed to desktop is it compatible with ACE or 1.07 patch

[miller 49]

Thanks konyo

ArmA2Base.de Mirror:

A319 & A320 BETA by konyo

Kind regards

Miller

[konyo 14]

I think (I do not have aircraft in game! have in editor) it's because I use the latest patch 1.07 for Arma2!( My friend tested your plane in Arma2 1.05 and all work normal)

this is still beta! I think in the future it will work correctly :)

Yeh i dont use the latest 1.07 patch, im still using 1.05, need to update tomorrow. I think it's the patch thats causing the problems with it, because it works fine with 1.05, tested by my mate using 1.05 too, worked fine.

& yup, still beta, so expect errors :)

crashed to desktop is it compatible with ACE or 1.07 patch

As i said above, i think its the 1.07 patch causing it to crash to desktop. Ill look into it tomorrow & im not sure if its compatible with ACE, didn't try as its only beta.

[fighterman 10]

hope u get things sorted mate as i played the arma 1 version and it was brilliant and this looks even beter.

[konyo 14]

hope u get things sorted mate as i played the arma 1 version and it was brilliant and this looks even beter.

Cheers, i will try my very best to get a stable version :)

[wolfbite 8]

I'm running 1.07 and I'm getting that error message.. when i look at the spot where the plane should be I get severe slowdown...

[Bartchie 10]

Well it doesn't have any matter if it's 1.05 or 1.07.

It's a file destination problem !