nikiforos 450 Posted March 16, 2017 Hello, Just tried out the latest update and unfortunately I get lower FPS in Yet Another Benchmark . I was getting 52 FPS with 1.66 and now get 49 FPS. Anyone else with the same experience? Share this post Link to post Share on other sites
thr0tt 12 Posted March 16, 2017 Yes, 31 down to 26. Winner Bis. Share this post Link to post Share on other sites
bullet purveyor 85 Posted March 16, 2017 I have no benchmarks, but the apex missions that was unplayable for me because of the fps tanking below 20 pre 1.68. Still is unplayable after the patch. Sadly there seems to be no improvements to speak of. Share this post Link to post Share on other sites
Ltf 381 Posted March 16, 2017 I used to have unstable 60 fps(lowest I've seen was 20) now I see 20 fps on a blank map. I hope a hotfix can solve that(I don't want to burn my pc with that game again) Share this post Link to post Share on other sites
Mr.jizz 9 Posted March 16, 2017 haven't bench marked it yet, but im actually getting in and around 150fps on blank map, i used to get 40-50 max, but i have noticed it dips down a lot to 20s, so it fluctuates from alot better to alot worse for me now and thats standing still not moving and no ai around? quiet strange...if i was able to keep it above 30fps in the minimums this would be fantastic news for me! Share this post Link to post Share on other sites
jone_kone 158 Posted March 17, 2017 64 bit just utilizes more RAM and depending on your setup it´s effects can vary (no FPS increase was promised). Also using any mods can cause a wide spectrum of issues. Share this post Link to post Share on other sites
nikiforos 450 Posted March 17, 2017 Which allocator is the best? I have an 6700k a GTX 1070 and running game on an SSD. Share this post Link to post Share on other sites
kremator 1065 Posted March 17, 2017 I'm using system malloc and I'm getting MUCH higher FPS ingame with the 64bit version. I do have quite a monster PC though. 1 Share this post Link to post Share on other sites
nikiforos 450 Posted March 17, 2017 System malloc? Do you mean the Windows allocator (system) or the Intel TBB 4 allocator? Share this post Link to post Share on other sites
Ltf 381 Posted March 17, 2017 I am so dumb, I didn't know that you can launch game on 32bit again. I have my fps back now(no, my computer is 64bit) Share this post Link to post Share on other sites
Mr.jizz 9 Posted March 17, 2017 I know we werent promised any frames, it was more to do with stutter/lag and yes i am getting far more frames now at times but i go on the lows and im now getting worse low end fps than i was before, so higher fps yes but the low fps is worse so thats not good before update 30-50 fps in most senarios mod/no mods update - far higher fps but also far worse fps (even in the senarios i used to get steady 40fps now i get like 15fps) could do with uploading logs but dont have time atm my system - i7 6700k 4.1ghz -16gb corsair dominator 2666mhz -rx480 1450/2222 hz -samsung 750 evo 500gb ssd i had a friend running same system except with an i56600k running standard clocks he was getting about 60fps and i was getting 20-30fps? dont get me wrong, im not so much complaining just pointing out that there seems to be an issue, as in getting lower fps than before the update, i would be happy if i was stuck with 30fps for this game but getting below 25 at times iust makes it unplayable esp considering i dont exactly have a week ass system. Share this post Link to post Share on other sites
domokun 515 Posted March 17, 2017 2 hours ago, nikiforos said: System malloc? Do you mean the Windows allocator (system) or the Intel TBB 4 allocator? System malloc = Windows allocator (system) That's why "system" is written in brackets afterwards. Malloc = memory allocator. Share this post Link to post Share on other sites
Housesparrow 8 Posted March 17, 2017 Is there a way I can benchmark this update to x64 client in a meanginful way? i7 2700k @4.6 GHz 32 GB, four sticks of DDR3 ram (2166MHz, 10-10-10-27) Maximus IV Extreme P67 mobo SSD Samsung 850 pro, 512 GB Win 7 Btw, playing Wasteland this morning with the new update, with few people on the server, it looked like the game client took up about 4+ GB of ram in task manager. Share this post Link to post Share on other sites
maquez 141 Posted March 17, 2017 you guys should stop may the use of these placebo performance tweaks usual arma3 sets all needed start parameters correct and for best performance, so there is absolut no need to tweak there anything. these settings should only be used to configure some special or uncommon hardware, like 12 core CPU or a GTX 970 where you need to limit the VRAM due stupid memory handling of GPU. leave all settings on default apart of: -nosplash, -enableHT, -hugePages, -noLogs I lost about 3 FPS on my system with 64bit, the problem must be on your side and there is no need to blame the developer who brought us finally 64bit. 64bit: http://steamcommunity.com/sharedfiles/filedetails/?id=818393730 32bit: http://steamcommunity.com/sharedfiles/filedetails/?id=774528690 the difference is maybe I never used any of these placebo performance tweaks second error that most of arma3 users do is setting stupid high viewdistances! using these settings with my hardware and arma 3 runs freaking well: http://steamcommunity.com/sharedfiles/filedetails/?id=773240860 http://steamcommunity.com/sharedfiles/filedetails/?id=773240727 2 Share this post Link to post Share on other sites
Unholy 10 Posted March 17, 2017 Quote or a GTX 970 where you need to limit the VRAM due stupid memory handling of GPU Hi maquez, what you mean? I unfortunately still have a GTX970, so, which kind of paramether I should use? Thanks! Share this post Link to post Share on other sites
maquez 141 Posted March 17, 2017 best is you ask dwarden what setting you exactly need to tweak for the GTX 970 he can tell this better than I can do 1 Share this post Link to post Share on other sites
Unholy 10 Posted March 17, 2017 Thanks! I will contact him... Share this post Link to post Share on other sites
nikiforos 450 Posted March 17, 2017 After some more testing I have to say that I'm starting to see positive stuff with the new 1.68 update. I played a mission that I created and the FPS were more stable and overall higher minimum FPS in heavy combat action. Need more testing of course but once again I'm starting to see good things :) 1 Share this post Link to post Share on other sites
danjuan 10 Posted March 18, 2017 with 32 bit i get 50-80fps depending on what mods i use now with 64 bit i get 15-22fps without runnung any mods, even after reinstalling arma from fresh with steam run in admin mode as suggested by BI i have i7 4910 2.90ghz nvidia gtx 880m 8gig 16gig ram Share this post Link to post Share on other sites
domokun 515 Posted March 18, 2017 41 minutes ago, danjuan said: with 32 bit i get 50-80fps depending on what mods i use now with 64 bit i get 15-22fps without runnung any mods, even after reinstalling arma from fresh with steam run in admin mode as suggested by BI i have i7 4910 2.90ghz nvidia gtx 880m 8gig 16gig ram 1 Share this post Link to post Share on other sites
nikiforos 450 Posted March 18, 2017 My ram usage will never go above 5.5 GB , is this normal? Share this post Link to post Share on other sites
danjuan 10 Posted March 19, 2017 11 hours ago, domokun said: this ^^^ i opened NVIDIA control panel and created a new profile in the "manage 3d settings" tab for ARMA3_X64.exe. i had to locate the exe within the profile but once done all sorted and better than the old 32bit Share this post Link to post Share on other sites
teabagginpeople 398 Posted March 19, 2017 13 hours ago, nikiforos said: My ram usage will never go above 5.5 GB , is this normal? Hmmm. Pretty sure mine was at 6 something other day. I was not testing this. Just Happened to have task manager open for another reason. Share this post Link to post Share on other sites
St. Jimmy 272 Posted March 19, 2017 15 hours ago, nikiforos said: My ram usage will never go above 5.5 GB , is this normal? Are you talking about total or just how much Arma uses? If I push the engine hard I can get the total usage around 10GB in Altis as you can see here Share this post Link to post Share on other sites
nikiforos 450 Posted March 19, 2017 Alrig 1 hour ago, St. Jimmy said: Are you talking about total or just how much Arma uses? If I push the engine hard I can get the total usage around 10GB in Altis as you can see here Alright, I did the same thing as you and I managed to push the ram usage to 6.5 GB in game. Total system use was around 9 Gb. Share this post Link to post Share on other sites