acta13 10 Posted January 8, 2015 On, My, God, can we see more with ACR pics? its too sexy Share this post Link to post Share on other sites
EricJ 765 Posted January 8, 2015 As far as I know, the 6.8 SPC was designed specifically to be compatible with 5.56/.223 mags, however some mags may be longer to accommodate loads with longer/heavier bullet designs. Okay didn't know that but after a quick check I can still go with 30-round mags as well. This will be a second Christmas, wouldn't do any harm at all :D lol okay :) On, My, God,can we see more with ACR pics? its too sexy Yeah sure later on today I have to do some testing of the 6.8 anyway. Share this post Link to post Share on other sites
EricJ 765 Posted January 8, 2015 Okay took the Masada 6.8 on a test run on an Insurgency map that i have from the J-SERE days and both the FMJ and the Boat tail are I would say very nice rounds and Spartan0536 did some nice work on it. I used my Trijicon ACOG 3.5/RMR combo and while it's "calibrated" more for 5.56 it still managed to get rounds on target, and personally I prefer the AAF over the CSAT simply because the AAF on average have good body armor compared to the relatively unarmored CSAT soldiers. So when I shot this dude twice in the stomach the AAF guy doubled over and disappeared with the Boat Tail round, and it does the job in close as well. I think to quote Q from Dr. No, "like getting hit with a brick" and this round does it well. Haven't tested it suppressed but the only thing is that BIS should have went with 6.8 instead of the 6.5 Grendel. Much more effective and given the work Spartan0536 did, follows like the real world bullet: Flatter trajectory of the 5.56 and hitting power like the 7.62 Share this post Link to post Share on other sites
wansec_6 200 Posted January 8, 2015 Sounds like everything is coming together nicely Eric. Would there be a chance you could configure a SCAR-L (with and without EGLM) to fire the 6.8 SPC as well? If it is performing as well as you say it is, it would be a valuable addition to the arsenal. Share this post Link to post Share on other sites
EricJ 765 Posted January 8, 2015 I can get it done, the SureFire mags... in the short future, haven't gotten to it yet though. Share this post Link to post Share on other sites
EricJ 765 Posted January 9, 2015 (edited) Ahh shit I missed the EGLM but yeah can do. But i will say earlier I was trying to feed off the dead and realized that I couldn't battlefield resupply, but yeah it's a good round, people should enjoy it. And as far as the M468 goes... maybe I can take some time to actually texture the beast. Edited January 9, 2015 by EricJ Share this post Link to post Share on other sites
jinougaf 11 Posted January 9, 2015 So...that means you will bring the M468 also next week?Oh,man just bury me! And...hope to see the update next week,lol. Share this post Link to post Share on other sites
acta13 10 Posted January 9, 2015 I really love this man Share this post Link to post Share on other sites
EricJ 765 Posted January 9, 2015 Don't get too excited JinougaF I DO have other projects that don't involve Arma 3 so I got some skinwork for DCS to do and thanks acta13 :) Share this post Link to post Share on other sites
jinougaf 11 Posted January 9, 2015 You already made me orgasm. Share this post Link to post Share on other sites
EricJ 765 Posted January 9, 2015 I'm not into men so yeah... good to know... I think :) ---------- Post added at 22:03 ---------- Previous post was at 21:32 ---------- Okay locked in for RC52: - HK416/M320 - M4(A1) Custom/M203 - SCAR-L 6.8/EGLM - Masada 5.56/6.8 - Ammo tweaks for the weapons Just have some config editing and inventory work for tomorrow and then I'll release the pack. Share this post Link to post Share on other sites
bagpiperguy 74 Posted January 9, 2015 I'm not into men so yeah... good to know... I think :)---------- Post added at 22:03 ---------- Previous post was at 21:32 ---------- Okay locked in for RC52: - HK416/M320 - M4(A1) Custom/M203 - SCAR-L 6.8/EGLM - Masada 5.56/6.8 - Ammo tweaks for the weapons Just have some config editing and inventory work for tomorrow and then I'll release the pack. Nice work cannot wait for dat Masada :D Share this post Link to post Share on other sites
jinougaf 11 Posted January 9, 2015 Don't wanna say that again,but....bury me oh yeah! Share this post Link to post Share on other sites
EricJ 765 Posted January 9, 2015 Don't wanna say that again,but....bury me oh yeah! No worries man, just gotta set your limits. It's cool you're excited but TMI (Too Much Information) :D Nice work cannot wait for dat Masada :D It's fairly decent. Granted yes the ejection port on current Bushmasters is on the right I just don't care to remodel it. The chamber area is what it is and the textures is what it is. After some user feedback I can tweak it, but remodeling the guns are out of the question. The guy/gal did some nice work and I'll leave it alone. Share this post Link to post Share on other sites
acta13 10 Posted January 9, 2015 Ohhh and one Question! is it possiblilty with JSRS Sound comes to ur weapon? Share this post Link to post Share on other sites
wansec_6 200 Posted January 9, 2015 Sounds great Eric. Would you have a Mk46 Minimi stashed away in your collection? If so, would you consider releasing it? Completely understand if you wouldn't. You seem to be doing a lot. Looking forward to whatever comes next. Share this post Link to post Share on other sites
coffeeshock 20 Posted January 9, 2015 It's fairly decent. Granted yes the ejection port on current Bushmasters is on the right I just don't care to remodel it. The chamber area is what it is and the textures is what it is. After some user feedback I can tweak it, but remodeling the guns are out of the question. The guy/gal did some nice work and I'll leave it alone. I don't know much about modding and all those 3D tools, but couldn't you just mirror the upper receicer (or whatever part of the model that actually is) without actually touching the model or textures? Share this post Link to post Share on other sites
Tacti-Cool 10 Posted January 9, 2015 He did say he didnt care to do it, Its getting released as is, If that port bothers you so much I have a feeling hes just going to tell you to do it yourself Share this post Link to post Share on other sites
EricJ 765 Posted January 9, 2015 (edited) @acta13: The majority of guns already use custom sounds, and I'm too lazy at the moment to care about JSRS integration. I just got DragonFyre and always love his work, but I don't want to disrespect the work of taumargin, armyinf, and others who have contributed good soundwork for this mod. Besides they're good quality anyway (was playing Invade and Annex with a friend and took off he suppressor because the M27 sound is so nice). @coffeeshock. I did say something about not wanting to fuck with the 3D model. I think I was being serious about it too, as I recall. Edited January 9, 2015 by EricJ Share this post Link to post Share on other sites
sorophx 25 Posted January 9, 2015 I am possibly wrong. but in case this gun is made by you, I have a small problem: also, I can't find the M468 anywhere, but its class name is listed in the readme, did you just remove it from your crates while it's unfinished? Share this post Link to post Share on other sites
EricJ 765 Posted January 9, 2015 No that gun is not by me. And I'll need to remove that entry in the readme for RC53. And yes I did remove it as it's not textured yet. I'm considering texturing it though but the source model has been available in a separate folder. Share this post Link to post Share on other sites
warlord554 2065 Posted January 9, 2015 The gun in that picture was DL'd from one of these 3d model websites. No clue who actually ported it. I did say something about not wanting to fuck with the 3D model. I think I was being serious about it too, as I recall. I love this one eric Share this post Link to post Share on other sites
EricJ 765 Posted January 9, 2015 Thanks brother. But there's a hard line between what I want and acquiescing to player demands or wants and my own plans for the mod itself (which reminds me I need to get Ruthberg the values so he can mod it for his Advanced Ballistics mod, been lackadaisacal about it). Yes he's making sense I got it but overall again, while people have thankfully contributed some good work on their individual parts and I always appreciate it. But overall I still make the final decision as it's my mod, etc. //////////////////////////////////////////////////////////////////// New Download Link: https://www.dropbox.com/s/ob121dhuqs0drsm/%40U100RC52.7z?dl=0 //////////////////////////////////////////////////////////////////// RC52 - Added HK416/M320 - Added SCAR-L 6.8/EGLM - Added M4(A1)/M203 - Tweaked the Optional TMR Bipod PBO to include the Masadas. It should be noted that for now its solely to allow the bipod resting and when a model is added will look funky during play. Share this post Link to post Share on other sites
jinougaf 11 Posted January 10, 2015 I am possibly wrong. but in case this gun is made by you, I have a small problem:https://lh5.googleusercontent.com/-wDwnIQWG9dU/VLBHZnejFmI/AAAAAAAACrk/OKDKt3ETP8Q/w1559-h877-no/Untitled.png also, I can't find the M468 anywhere, but its class name is listed in the readme, did you just remove it from your crates while it's unfinished? The CQBR in your picture is from Toadie's HLC AR15 pack,and he had noticed this issue and was working on it. And Eric,congratulations to the release! And a little confused by the changelog of RC52,is that means ACR are not in the pack right now? Share this post Link to post Share on other sites
