Dwarden 1125 Posted March 7, 2013 (edited) Alpha state changes aren't definitive! it's Work-In-Progress, yet the aim is to offer : 0. BattlEye http://battleye.com/ anti-cheat, (with RCON (remote control) interface) [Done stable branch] 1. Dedicated server to run non-dependent on STEAMclient (yet support STEAMcmd deployment) [Done] 2. Dedicated server capable run multiple binaries on same OS instance [Done] http://community.bistudio.com/wiki/server.cfg#Arma_III_-_STEAM_ports_configuration'> http://community.bistudio.com/wiki/server.cfg#Arma_III_-_STEAM_ports_configuration (each server instance needs to use unique steamports !)*note: known issue == IF each Dedicated Server uses own NIC interface defined via -ip= then the multiple instances will fail [WIP] 3. ability to run at least 1 instance of Client / Dedicated Client on same OS instance where is also Dedicated Server(or Servers)[Done] 4. if possible allow multiple Dedicated Clients on same OS instance where is already Dedicated Server (or Servers)[Done] We added newly loopback mod for testing. You enable it by "loopback = true;" , added into Arma 3 server config file. This will allow You to join multiple clients from same IP (and only) as the server runs at! note: the loopback mode was made for testing and works only in LAN mode, the server is not reporting to master servers at all (the game is not considered public MP, only local) 5. allow to run multiple Dedicate (HeadLess) Clients (super fast network mode) as part of dedicated sever binary [Done 1.36] https://community.bistudio.com/wiki/Arma_3_Headless_Client *HC is based off server binary and server data now, you don't need client binary nor any client data either[Done 1.36] 6. ioffer both Windows and Linux binaries (atm. DEV/RC branch Server available only for Windows platform) [Done] 7. if possible then allow Dedicated Server LAN multiplayer mode via command-line switch -LAN [WIP] 8. improvements to reverse-NAT issues (mainly affecting listen-server (aka server hosted within game client) [WIP] note: no deadline ETA (estimated time of arrival(but we try ASAP (as soon as possible)) * each instance of Client / Dedicated Client (both modes) needs unique STEAM account with the Arma 3 game ownership note: that You can use STEAMcmd (non-GUI) https://developer.valvesoftware.com/wiki/SteamCMD instead of STEAMclient (GUI) downloading development branch through SteamCMD : steamcmd.exe +login <username> <password> +force_install_dir c:\install\folder\ +app_update "107410 -beta development" validate +quit read more here: http://forums.bistudio.com/showthread.php?154522-Switch-to-development-branch-with-SteamCMD&p=2393727&viewfull=1#post2393727 very short and simple summary to avoid repeated questions onto dedicated server subject, stability - done, ongoing development server binary - done, STEAMcmd support multiplatform server - done, STEAMcmd support server data package - DONE, STEAMcmd support server distribution - DONE, STEAMcmd support server administration - BattlEye RCON, usability and simplify WIP (work in progress) server anti-cheat - BattlEye, DONE headless client via dedicated server, done STEAMcmd support secret goodies - WIP (work in progress) * Linux and Windows server binary available note: later will be replaced with links and more detail Edited February 10, 2015 by Dwarden Share this post Link to post Share on other sites
dcthehole 1 Posted March 7, 2013 Will you be able to run multiple instances with this? Share this post Link to post Share on other sites
zorrobyte 30 Posted March 7, 2013 Will you be able to run multiple instances with this? server binary - WIPx2 Uhh, yeah. Share this post Link to post Share on other sites
dcthehole 1 Posted March 7, 2013 server binary - WIPx2Uhh, yeah. lol didn't even see that. Share this post Link to post Share on other sites
mkill73 0 Posted March 8, 2013 Just what I was looking for, thanks very much. http://forums.bistudio.com/showthread.php?148198-ARMA-3-server-exe Share this post Link to post Share on other sites
Lokyi 10 Posted March 8, 2013 Where's the "high five" button Dwarden? It's refreshing to see some heads-up information getting posted on the forums for once :cool: Top work, keep it up. Share this post Link to post Share on other sites
sandman1980 18 Posted March 8, 2013 When the dedicated server is available, there will be possibilities of renting a server in some Hosting Servers Provider? or we have to wait until the Full Game are available? Actually i have rent a Arma2co Server in Vilayer LTD and I would like to have one for Arma3. Share this post Link to post Share on other sites
iOGC_Aenigma 1 Posted March 8, 2013 I imagine as soon as the files are available to GSP's there will be servers available. Unless Bis put restrictions on them. I doubt that highly though as there is no better way to test a game than get it played. Sent from my HTC One X using Tapatalk 2 Share this post Link to post Share on other sites
SavageCDN 231 Posted March 8, 2013 Thank you very much for this info Dwarden Share this post Link to post Share on other sites
skadog 0 Posted March 10, 2013 Where in these 7 layers listed here is the Linux Dedi, server binary or data package? Share this post Link to post Share on other sites
ryandev00 1 Posted March 10, 2013 What does x2 or x4 mean? Share this post Link to post Share on other sites
Dwarden 1125 Posted March 10, 2013 double and quad effort ;) Share this post Link to post Share on other sites
marker 1 Posted March 10, 2013 Do we have a release time frame Dwarden? Also, did I see you mention a server admin group somewhere before? Cheers Share this post Link to post Share on other sites
Tankbuster 1744 Posted March 10, 2013 Good work Dwarden. Make it so. :) Share this post Link to post Share on other sites
ringoray 1 Posted March 11, 2013 Thanks for Info !! Keep up the already amazing work! Share this post Link to post Share on other sites
Lokyi 10 Posted March 11, 2013 (edited) Do we have a release time frame Dwarden?Also, did I see you mention a server admin group somewhere before? Cheers http://forums.bistudio.com/showthread.php?131825-Skype-groups-amp-other-contact-groups Edited March 11, 2013 by Lokyi Share this post Link to post Share on other sites
redshirt_ensign 11 Posted March 12, 2013 Thanks Dwarden. Where in these 7 layers listed here is the Linux Dedi, server binary or data package? Was there any answer to this? Share this post Link to post Share on other sites
bogroll 10 Posted March 12, 2013 Any timeframe on the server binaries > surprised this wasn't in a robust state at the time of release. Early days, however please give us a rough timeframe. Share this post Link to post Share on other sites
SavageCDN 231 Posted March 14, 2013 Thanks Dwarden.Was there any answer to this? * Linux server binary is slated for release after Windows server binary Share this post Link to post Share on other sites
kremator 1065 Posted March 14, 2013 A dedi server (even as a DEV version) would be very welcome with those on crappy 2003 servers. Currently we cannot deploy the arma3.exe as -server as we cannot get DX11 to run. Let us know what you need to test the dedi and it shall be so :) Share this post Link to post Share on other sites
SavageCDN 231 Posted March 14, 2013 ^ it can be problematic on 2008 pre R2 servers as well.. requires a heap of stuff to be installed and on a server that's not going to happen. Share this post Link to post Share on other sites
gossamersolid 155 Posted March 14, 2013 A dedi server (even as a DEV version) would be very welcome with those on crappy 2003 servers. Currently we cannot deploy the arma3.exe as -server as we cannot get DX11 to run.Let us know what you need to test the dedi and it shall be so :) Yeah guess you're shit out of luck on 2003 servers until the actual dedi binary comes along. Just a quick question though: Why are you running server 2003 still rather than 2008 R2? Is there a good reason? Share this post Link to post Share on other sites
MarkMods 1 Posted March 14, 2013 Looking forward to the official Dedicated Servers! We'll keep following this thread :) However after some tuning the normal .exe works quite fine as well :) Share this post Link to post Share on other sites
SaL_iOGC 1 Posted March 15, 2013 Looking forward to the official Dedicated Servers! We'll keep following this thread :) However after some tuning the normal .exe works quite fine as well :) Wish I could pick your mind.....:( Share this post Link to post Share on other sites
Dolph 1 Posted March 15, 2013 However after some tuning the normal .exe works quite fine as well :) Care to elaborate on your 'tuning'? Share this post Link to post Share on other sites