mjolnir66 48 Posted February 18, 2014 Sights: SUSAT ACOG (with Doctor sight on both regular ACOG mounts and special 19mm rail brackets) LDS Ironsights CWS night sight Viper TI sight Rail accessories: LLM-01 LLM Mark 3 UGL Downgrip Surefire torch And thats about it. You'll get lad (like me) who'll put their own stuff on, but otherwise its quite limited in terms of what people put on. Share this post Link to post Share on other sites
mihikle 2 Posted February 18, 2014 (edited) I believe ELCAN will become standard issue soon for teeth arms, and the SUSAT will become standard issue for non-teeth arms Edited February 18, 2014 by mihikle Share this post Link to post Share on other sites
da12thMonkey 1943 Posted February 18, 2014 (edited) SightsSUSAT ACOG (TA31F? With Docter RDS) Lightweight Day Sight (LDS/Specter OS) Common Weapon Sight (CWS) VIPR II TWS For the UGL Ladder sight EoTech on an Istec drum (Can't remember the model, but it has the shotgun reticule) Rapid Acquisition Aiming Module Fire Control System (RAAM FCS) Attachments LLM-01 Vario Ray LLM (to replace the LLM-01) Grip-pod VFG Surefire vortex flash eliminator I'm sure da12thMonkey will be along shortly to correct me on a lot of this, like the glorious kit pest he is. :) ACOG model is a TA31FIST-IW with a Shield MRD (Trijicon's own 'Doctor' sights are a copy of the Shield MRD made with better materials, but the UK uses the MRD because they're cheaper, lighter and made in the UK). The sight is basically a TA31F but with a crosshair reticle and the range marks tweaked to fit the SA80 instead of AR15-type rifles, plus that weird cantilever-type mount to fit it to the 19mm dovetail optical rail. Qioptiq's VIPIR 2+ (higher magnification version of the older VIPIR 2 Lightweight Thermal Imager [LWTI]) and FTS (FIST Thermal Sight - a UKmil-spec version of the Dragon LR sight) are the current generation of thermal imaging sights. CWS (4x) and Maxikite Mk.2 (6x) night-vision sights are used - Maxikite seems to earmarked for LSW Sharpshooters where IW & UGL users are meant get a mix of CWS and FTS FTS, CWS and Maxikite Mk.2 are all meant to carry the same Shield CQB red-dot sight that sits on top of the LDS/Specter OS4 (different model to the old Shield MRD used on the ACOG) Surefire flash-hider is a FHSA80SA. It can be fitted with a FA556SA suppressor, which are in the system for the L119A1. EOTech for the UGL is an EOTech 552 (pretty sure it's not a 512, which is more or less the same as the 552, but without a night-vision setting for the reticle). Haven't seen the reticle myself. RAAM might not see widespread issue because it's a fucking hefty piece of kit and the MoD want a lighter Fire-Control System for the UGL. The RAAM model used currently though has an Aimpoint Micro T1 as the actual aiming device. Also, bayonets are attachable... Edited February 18, 2014 by da12thMonkey Share this post Link to post Share on other sites
AveryTheKitty 2626 Posted February 19, 2014 Kiory, just a suggestion: Would you be so kind to allow the L85A2 to use the vanilla Stanag Tracer mags? Thanks. Share this post Link to post Share on other sites
Redders 15 Posted February 19, 2014 :)Also, bayonets are attachable... Goes without saying, doesn't it? :p Share this post Link to post Share on other sites
kiory 405 Posted February 25, 2014 (edited) I'm real sorry for the lack of news guys, but I had a bit of a set back with the UGL (stupid fucking airsoft), so most of that has been re done. I've also been working on the LDS, still missing some stuff but the bulk of it is done, here are some pics. http://i.imgur.com/ztjPU4X.jpg (110 kB) http://i.imgur.com/Y7NlqqH.jpg (105 kB) So the next update will feature (and I can promise this), the LDS, the UGL variant and flash hider attachment. Let me know your thoughts, also what you guys would like to see added. Edited February 25, 2014 by Kiory Share this post Link to post Share on other sites
serjames 357 Posted February 25, 2014 looking great Kiory ! SJ Share this post Link to post Share on other sites
scrim 1 Posted February 25, 2014 Nice! Will the scope be 2D or 3D? Hoping for the former, the 3D ones tend to ruin the reticle in my mind as everything becomes smaller, and thus the finer details are left blurred or invisible. Share this post Link to post Share on other sites
kiory 405 Posted February 25, 2014 It'll be 3D, with a bit of luck, with PiP.... As usual I'll be releasing the source so if someone wants to mod it into 2D they are more than welcome. Share this post Link to post Share on other sites
AveryTheKitty 2626 Posted February 25, 2014 RIS should come next! Please Kiroy? :D Also awesome, work, lovin' the Spectre. Share this post Link to post Share on other sites
tachi 10 Posted February 25, 2014 Make a british m249 :) Share this post Link to post Share on other sites
p0laris 14 Posted February 25, 2014 RIS should come next! Please Kiroy? :DAlso awesome, work, lovin' the Spectre. I 2nd this.. Please bring the RIS.. I am dying to attach a laser sight on top rail along with a sexy scope :P Share this post Link to post Share on other sites
p_siddy 58 Posted February 25, 2014 (edited) I missed your stream this morning kiory. Im guessing this was finished off then? Looks real nice mate! GJ As for what next, if we're talking L85 series I think it has to be the RIS inc LLM system and anpvs-22... http://www.ownthenight.com/catalog/i31.html ... the night sight attachment that can be used with the elcan (if I am correct?) Obviously in game this would have to come with another version of the Elcan. If we're talking any British weapon, has to be the L129A1 or L110A2 (The minimi). Edited February 25, 2014 by P_Siddy Share this post Link to post Share on other sites
mihikle 2 Posted February 25, 2014 Blimey Siddy :) Great work mate I can't wait to play with this in-game! Get it finished before starting anything else! Haha :P Share this post Link to post Share on other sites
p_siddy 58 Posted February 25, 2014 Blimey Siddy :)Great work mate I can't wait to play with this in-game! Get it finished before starting anything else! Haha :P What? lol, he said what you guys would like to see added". But I will retract my original post... Kiory, make whatever you please my friend. Share this post Link to post Share on other sites
mihikle 2 Posted February 25, 2014 Ah missed that - in that case a GPMG! Haha. But that's a long way off, better to see the L85 release before anything else comes in :) Share this post Link to post Share on other sites
kiory 405 Posted February 26, 2014 I wouldn't say a long way off. Share this post Link to post Share on other sites
disco.modder 116 Posted February 26, 2014 I wouldn't say a long way off. I sense great things coming our way! The RIS variant would certainty be a great addition in the future, and maybe even camo versions of the guns? Share this post Link to post Share on other sites
kiory 405 Posted February 26, 2014 I'll leave the camo stuff to other more capable texture artists. ;) Share this post Link to post Share on other sites
mihikle 2 Posted February 26, 2014 I wouldn't say a long way off. :P Now I'm excited. If it was possible to be more excited that I already was for this mod! Share this post Link to post Share on other sites
p_siddy 58 Posted February 26, 2014 Woot Woot! Cannot wait to see this in game! 40mm's all round! Share this post Link to post Share on other sites
sabre 244 Posted February 27, 2014 Great work mate, the new pieces are looking top notch. I love the look of the L85's after they have received the brown paint treatment, if you don't want to do it or don't have someone else already going to do it I could help add some of those. Share this post Link to post Share on other sites
p_siddy 58 Posted February 28, 2014 Admittedly, tan and green versions of the rifles would be awesome for using on a variety of different maps with different unit camo's Share this post Link to post Share on other sites
deniodan 15 Posted March 1, 2014 Hey Kiory! This is my favorite Scope in arma 3. It is beautiful, compact and have a backup iron sight. Thanks mate! Another feature of your Sight that makes it my favorite is their position on the top rail. It is positioned slightly forward on the top rails than in other scopes (even the vanilla ones or even in other weapons). Sorry if is a stupid question but how do you manage do do that? Is something in the "config.cpp" or is in the model itself? Thanks man! Share this post Link to post Share on other sites
kiory 405 Posted March 1, 2014 How do you mean deniodan? Do you mean like the camera is positioned slightly forward? Share this post Link to post Share on other sites
