Search the Community
Showing results for tags 'high'.
Found 10 results
-
MsMpEng.exe - High Disk Use with Launcher Open?
lawman_actual posted a topic in ARMA 3 - TROUBLESHOOTING
In the past I've noticed issues with performance that coincide with high memory use by the MsMpEng.exe service, which is the background 'real-time scanning' by Windows Defender. The problem seemed to go away, but now has returned over the last week. Thus far I have followed the advice from Answers Microsoft, changing Defender's Schedule and adding MsMpEng.exe to Defender's exceptions. However, the issue has persisted. I began booting things up step-by-step to see where the issue kicks in. When completely idle (no apps launched), the anti-malware service would run, but usually at a low level and if it did spike it wouldn't be as extreme as when playing Arma and would subside shortly. With Steam launched, the disk use rises (around 60-80% typical), with the service appearing to be the primary guzzler of disk use. However, shortly after launch things return to a 'stable' state. The same cannot be said once the launcher is run. Disk use spikes to 80-100%, with MsMPEng.exe being the primary consumer at between 60MB/s and 80MB/s. It continues to fluctuate for as long as I have the launcher open, even if I do nothing with it, and will subside once it is closed after a little while. I have tried adding the arma3launcher.exe service to Defender's exceptions and have restarted since...but Defender doesn't seem to be paying any attention. Would appreciate some advice on next steps from somebody a bit more familiar with such things. Cheers, Law -
I have a Little Question. I tried to place a Bridge and trees from Tanoa on the Island. In X-Cam the high was correct. After packing and after start the game the objects are mostly to high. whats wrong?? cheers...
-
Hi guys, I know this bug already got reported, but it didn't get fixed. So, if I press right click on the map as commander in warfare (high command enabled), then the menu (city menu, move, patrol, etc.) doesn't pop up. To reproduce this bug, you have to start a new CTI/Warfare game, save it and resume it. Voila, right click doesn't work anymore. There is a workaround where you vote for an AI commander and then get commander again, but that workaround is pretty annoying, because the AI does a lot of things I don't want it to. Does somebody know another workaround? And please Bohemia Interactive, fix this bug. The bug is reported here also: https://dev.withsix.com/issues/17295 https://steamcommunity.com/app/33930/discussions/2/458605613409297272/
-
Hi guys, I know this bug already got reported, but it didn't get fixed. So, if I press right click on the map as commander in warfare (high command enabled), then the menu (city menu, move, patrol, etc.) doesn't pop up. To reproduce this bug, you have to start a new CTI/Warfare game, save it and resume it. Voila, right click doesn't work anymore. There is a workaround where you vote for an AI commander and then get commander again, but that workaround is pretty annoying, because the AI does a lot of things I don't want it to. Does somebody know another workaround? And please Bohemia Interactive, fix this bug. Every official CTI/Warfare mission is affected of this bug. The bug is reported here also: https://dev.withsix.com/issues/17295 https://steamcommunity.com/app/33930/discussions/2/458605613409297272/
-
Hi guys, I know this bug already got reported, but it didn't get fixed. So, if I press right click on the map as commander in warfare (high command enabled), then the menu (city menu, move, patrol, etc.) doesn't pop up. To reproduce this bug, you have to start a new CTI/Warfare game, save it and resume it. Voila, right click doesn't work anymore. There is a workaround where you vote for an AI commander and then get commander again, but that workaround is pretty annoying, because the AI does a lot of things I don't want it to. Does somebody know another workaround? And please Bohemia Interactive, fix this bug. The beta is also affected of this bug. The bug is reported here also: https://dev.withsix.com/issues/17295 https://steamcommunity.com/app/33930/discussions/2/458605613409297272/
-
Hi guys, I know this bug already got reported, but it didn't get fixed. So, if I press right click on the map as commander in warfare (high command enabled), then the menu (city menu, move, patrol, etc.) doesn't pop up. To reproduce this bug, you have to start a new CTI/Warfare game, save it and resume it. Voila, right click doesn't work anymore. There is a workaround where you vote for an AI commander and then get commander again, but that workaround is pretty annoying, because the AI does a lot of things I don't want it to. Does somebody know another workaround? And please Bohemia Interactive, fix this bug. The bug is reported here also: https://dev.withsix.com/issues/17295 https://steamcommunity.com/app/33930/discussions/2/458605613409297272/
-
Arma 2 CTI / Warfare High Command Right Click bug
Hennenmann posted a topic in ARMA 2 & OA - TROUBLESHOOTING
Hi guys, I know this bug already got reported, but it didn't get fixed. So, if I press right click on the map as commander in warfare (high command enabled), then the menu (city menu, move, patrol, etc.) doesn't pop up. To reproduce this bug, you have to start a new CTI/Warfare game, save it and resume it. Voila, right click doesn't work anymore. There is a workaround where you vote for an AI commander and then get commander again, but that workaround is pretty annoying, because the AI does a lot of things I don't want it to. Does somebody know another workaround? And please Bohemia Interactive, fix this bug. The bug is reported here also: https://dev.withsix.com/issues/17295 https://steamcommunity.com/app/33930/discussions/2/458605613409297272/ -
Greetings I made high resolution Tanoa map for ArmA comunity usage. A final bitmap have resolution 15604x15605 pixels and one pixel represent 0.9843 meters. The final bitmap has been stitched from 250 screenshots. To open the bitmap i recommend use special software which can handle huge images like GIMP or Photoshop. URL: http://server.btkclan.cz/maps/tanoa Enjoy.
-
Editing - Stable flight F/A18 Super Hornet
dragonred posted a topic in ARMA 3 - MISSION EDITING & SCRIPTING
Hi, i found the F18 Super Hornet mod and i have created a mission with the eden editor with both versions of the fighter, the E and F version, the F version as you probably know is "tandem-seat". So i have the empty fighter, a Munition HEMTT vehicle and two pilots, one of them the player, there is a village in which there are several OPFOR units and i have set some waypoints for the plane. It works like this -First i get in the fighter as the pilot so i can use the Service menu and select which equipment i am going to use -Then after the fighter is rearmed, then i get in the gunner seat and tell the AI pilot to get in. -I have used a trigger linked to the AI and the first waypoint, so when he gets in, it goes to the first one and then the fighter takes off perfectly. The problem is, although i have set limited speed in several waypoints the plane goes too fast so i can bomb the objetives, and also it flies at 300M height, so the fighter gets hit, and also, it is not stable at all. I have tried with the flyInHeight script, but the speed is still too high and not stable. Does anyone know how to make it fly slower, higher and more stable? And also i would like to know how to make it land when it returns to the airport. Thanks and sorry for my poor english. -
CLS Wasteland (Altis & Stratis) - Full Save | Base Building | High FPS |
biabock posted a topic in ARMA 3 - MULTIPLAYER
Server Name #1: CLS #1 Wasteland Stratis | $10K START | gaming.clsesports.com.br IP: 107.191.36.154:39000 Server Name #2: CLS #2 Wasteland Altis | $1500 START | gaming.clsesports.com.br IP: 64.237.59.186:35000 Website: arma.clsesports.com.br Forum: forums.clsesports.com.br Teamspeak for questions: gaming.clsesports.com.br Accepting Suggestions =D Server Powered by: NITRADO.NET
