Unknown_GTX 36 Posted October 12, 2017 2 hours ago, pioneer said: The new version works fine, but on the server it breaks ACE + WMT + TFAR . Also, I was told that the server was not running on the linkus. What could be the reason? Theres too little information for me to create a conclusion and therefor a solution. In what way breaks it the mods? what means linkus. workshop or script version? Share this post Link to post Share on other sites
pioneer 237 Posted October 14, 2017 As far as I understand, the function BIS_fnc_addStackedEventHandler can be used only once. If it is used multiple Addons, something might not work. https://github.com/CBATeam/CBA_A3/issues/400#issuecomment-228458836 Read here But maybe I misunderstood, because I do not speak English. And this was written to me by other owners of the server, they did not work ACRA - (I think mod more or less works, but it makes other mods crap out - acre and some features of ace. I think event handlers are not run properly) 1 Share this post Link to post Share on other sites
Unknown_GTX 36 Posted October 14, 2017 22 minutes ago, pioneer said: As far as I understand, the function BIS_fnc_addStackedEventHandler can be used only once. If it is used multiple Addons, something might not work. No no. Its the other way around BIS_fnc_addStackedEventHandler is the solution. And onEachFrame would be the problem. But my addon uses addStackedEventHandler so this shouldnt be the problem. It must be something other haha Share this post Link to post Share on other sites
taro8 806 Posted October 30, 2017 I managed to get the compass to point where you actually looking, even if you are using the free look. to make it work like that all you really need to do is replace 2 of this. Quote _playerDir = (getDir player)/100; with this: Quote _playerDir = (([player, positionCameraToWorld [0,0,100]] call BIS_fnc_dirTo))/100; One thing I'm trying to figure out is how to better mark your current heading, the small needle isn't very well visible. a downward arrow above the compass would be better. My suggestion would be to add additional option that displays the compass only when key is held, so you can combine it with the time, task and vanilla compass display. Lastly, I think it would be a good idea to move the settings to CBA addon configuration, if possible of course. EDIT: Sadly the compass seem to lock up during some camera transitions and such. There is no way to reset compass and restart it to fix it. 1 Share this post Link to post Share on other sites
Unknown_GTX 36 Posted October 30, 2017 12 hours ago, taro8 said: EDIT: Sadly the compass seem to lock up during some camera transitions and such. There is no way to reset compass and restart it to fix it. Still thanks for trying. I will probably leave it like this for the moment because i got new projects running. And i have no idea how to do the thing with CBA. 1 Share this post Link to post Share on other sites
bob_the_k 2 Posted December 17, 2017 So I downloaded the latest version and installed it as a mod. I got this in my server.RPT: Spoiler 13:29:14 File @VoyagerCompass\mod.cpp, line 6: '.logo': Missing ';' at the end of line 13:29:14 File @VoyagerCompass\mod.cpp, line 7: '.logoOver': Missing ';' at the end of line 13:29:14 File @VoyagerCompass\mod.cpp, line 11: '.overviewPicture': Missing ';' at the end of line so I added the semicolons but my server won't unlock once it starts (it didn't unlock without the semis either). There are no errors or warnings and it does load as per the load table. I am running the latest Infistar but the posts indicated that we don't have to change anything in Infistar. I'd much rather run it as a script instead of mod but didn't see a download for a script version. Where did you get it? Share this post Link to post Share on other sites
whguqeoghk 1 Posted December 29, 2017 thanks for your awesome addon can i using this addon in my server? Share this post Link to post Share on other sites
anfo 118 Posted March 20, 2018 Hi @Unknown_GTX I saw your mod previewed in a fellow clan member's game stream, so I thought I'd give it a look. It looks so well designed and presented it could easily belong in Arma 3! I'm also a long time user of HUD Vitals if you know it. Have a small issue which I thought i would check to see if it is a setting I missed for example. I own TrackIR which as you probably know allows me to turn my head independent of my in-game body. Although HUD Vitals manages this correctly, Voyager does not seem to display the bearing of where my head looks but instead remains fixed to the body's bearing. I have gone back to HUD Vitals temporarily but would love to come back if this is ever rectified. Share this post Link to post Share on other sites
topden 62 Posted April 24, 2018 can u do that your compass HUD is turn on if the player has a arma-compass in the equipment and turned off if he does not? Share this post Link to post Share on other sites
aussie battler 94 Posted May 1, 2018 @bob_the_k If you still want the script you can grab it here: https://www.dropbox.com/s/vib3bk7aea5cah6/fn_voyagerCompass1_1.sqf?dl=1 Spoiler fnc_removeString = { params ["_from", "_to", "_string"]; _stringArray = _string splitString ""; _stringArray deleteRange [_from, _to]; _stringArray = _stringArray joinString ""; private _returnMe = _stringArray; _returnMe }; fnc_loadSettings = { systemchat "init fnc_loadSettings"; _nc_settings = profileNamespace getVariable "nc_settings"; if (isNil "_nc_settings") then { _nc_settings = [0.499889,0.0346965,3.16098,1.86439,0,1.18143,"C0",0.753254,"PuristaLight",0,1,1,-0.0340903,5,1,0,"B1B1","FFFFFF"]; }; private _returnMe = _nc_settings; _returnMe; }; fnc_saveSettings = { systemchat "init fnc_saveSettings"; params ["_ncX", "_ncY","_ncW","_ncSpan","_ncType","_ncFontSize","_ncAlpha","_ncAlphaNr","_ncFontOption","_ncInvert","_ncShadow","_ncMarkerVisibility","_ncMarkerY","_ncFontOptionNr","_ncColorNr","_ncTypeNr","_ncColorCustom","_ncColor"]; profileNamespace setVariable ["nc_settings",[_ncX,_ncY,_ncW,_ncSpan,_ncType,_ncFontSize,_ncAlpha,_ncAlphaNr,_ncFontOption,_ncInvert,_ncShadow,_ncMarkerVisibility,_ncMarkerY,_ncFontOptionNr,_ncColorNr,_ncTypeNr,_ncColorCustom,_ncColor]]; saveProfileNamespace; systemchat "saving complete"; }; fnc_showSettings = { systemchat "init fnc_showSettings"; disableSerialization; ncColorOption = "f9f9f9"; nc_lb_colorOption = [ ncColorOption, "FFFFFF", "000000"]; nc_lb_fontOption = [ "EtelkaMonospacePro", "EtelkaMonospaceProBold", "EtelkaNarrowMediumPro", "LucidaConsoleB", "PuristaBold", "PuristaLight", "PuristaMedium", "PuristaSemiBold", "RobotoCondensed", "RobotoCondensedBold", "RobotoCondensedLight", "TahomaB"]; folder = [] call fnc_loadSettings; if (isNil "folder") then { folder = [0.499889,0.0346965,3.16098,1.86439,0,1.18143,"C0",0.753254,"PuristaLight",0,1,1,-0.0340903,5,1,0,"B1B1","FFFFFF"]; }; ncX = folder select 0; ncY = folder select 1; ncW = folder select 2; ncSpan = folder select 3; ncType = folder select 4; ncFontSize = folder select 5; ncAlpha = folder select 6; ncAlphaNr = folder select 7; ncFontOption = folder select 8; ncInvert = folder select 9; ncShadow = folder select 10; ncMarkerVisibility = folder select 11; ncMarkerY = folder select 12; ncFontOptionNr = folder select 13; ncColorNr = folder select 14; ncTypeNr = folder select 15; ncColor = folder select 17; nc_barOffsetX = (ncX * safezoneW + safezoneX); nc_barOffsetY = (ncY * safezoneH + safezoneY); nc_marker_offset = ncMarkerY + nc_barOffsetY; nc_dialog_controls = [ [1000,"nc_background",[1,"",[0.29375 * safezoneW + safezoneX,0.225 * safezoneH + safezoneY,0.170156 * safezoneW,0.759 * safezoneH],[-1,-1,-1,-1],[0.07,0.07,0.07,1],[-1,-1,-1,-1],"","RscText"],[]], [1004,"nc_background_char",[1,"",[0.304062 * safezoneW + safezoneX,0.489 * safezoneH + safezoneY,0.149531 * safezoneW,0.264 * safezoneH],[-1,-1,-1,-1],[0.03,0.03,0.03,1],[-1,-1,-1,-1],"","RscText"],[]], [1001,"nc_background_pos",[1,"",[0.304062 * safezoneW + safezoneX,0.28 * safezoneH + safezoneY,0.149531 * safezoneW,0.154 * safezoneH],[-1,-1,-1,-1],[0.03,0.03,0.03,1],[-1,-1,-1,-1],"","RscText"],[]], [1007,"nc_background_features",[1,"",[0.304062 * safezoneW + safezoneX,0.808 * safezoneH + safezoneY,0.149531 * safezoneW,0.11 * safezoneH],[-1,-1,-1,-1],[0.03,0.03,0.03,1],[-1,-1,-1,-1],"","RscText"],[]], [1002,"nc_background_title_pos",[1,"STAND & SPOT",[0.304062 * safezoneW + safezoneX,0.247 * safezoneH + safezoneY,0.149531 * safezoneW,0.033 * safezoneH],[-1,-1,-1,-1],[0.11,0.11,0.11,1],[-1,-1,-1,-1],"","RscText"],[]], [1103,"nc_background_pos_x",[1,"X",[0.314375 * safezoneW + safezoneX,0.291 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"HORIZONTAL POSITION. Set the correct horizontal position you desire.","RscStructuredText"],[]], [1104,"nc_background_pos_y",[1,"Y",[0.314375 * safezoneW + safezoneX,0.324 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"VERTICAL POSITION. Set the correct vertical position you desire.","RscStructuredText"],[]], [1106,"nc_background_pos_w",[1,"W",[0.314375 * safezoneW + safezoneX,0.357 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"WIDTH. Exact range of visibility for points.","RscStructuredText"],[]], [1107,"nc_background_pos_s",[1,"S",[0.314375 * safezoneW + safezoneX,0.39 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"SPAN. Change the distance between the points.","RscStructuredText"],[]], [1003,"nc_background_title_char",[1,"CHARACTERISTICS",[0.304062 * safezoneW + safezoneX,0.456 * safezoneH + safezoneY,0.149531 * safezoneW,0.033 * safezoneH],[-1,-1,-1,-1],[0.11,0.11,0.11,1],[-1,-1,-1,-1],"","RscText"],[]], [1100,"nc_background_fontSize",[1,"sS",[0.314375 * safezoneW + safezoneX,0.544 * safezoneH + safezoneY,0.020625 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"SIZE-FONT. Determines the size of the individual cardinal points.","RscStructuredText"],[]], [1102,"nc_background_fontAlpha",[1,"A",[0.314375 * safezoneW + safezoneX,0.577 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[1,1,1,0.5],[0,0,0,0],[-1,-1,-1,-1],"TRANSPARENCY. Set the visibility of the whole compass.","RscStructuredText"],[]], [1109,"nc_background_fontColor",[1,"#",[0.314375 * safezoneW + safezoneX,0.621 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[1,0,0,1],[0,0,0,0],[-1,-1,-1,-1],"COLOR-CODE. put #HEX color here for custom color.","RscStructuredText"],[]], [1110,"nc_background_shadow",[1,"Shadow",[0.402031 * safezoneW + safezoneX,0.709 * safezoneH + safezoneY,0.0360937 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"SHADOW. Enable the dropshadow for the cardinal points.","RscStructuredText"],[]], [1111,"nc_background_invert",[1,"Invert",[0.355625 * safezoneW + safezoneX,0.709 * safezoneH + safezoneY,0.0309375 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"INVERT. Switch between the option of the needles being at the top or bottom of the cardinal points.","RscStructuredText"],[]], [1006,"nc_background_title_features",[1,"MARKERS & FEATURES",[0.304062 * safezoneW + safezoneX,0.775 * safezoneH + safezoneY,0.149531 * safezoneW,0.033 * safezoneH],[-1,-1,-1,-1],[0.11,0.11,0.11,1],[-1,-1,-1,-1],"","RscText"],[]], [1112,"nc_background_pos_markerY",[1,"Y",[0.314375 * safezoneW + safezoneX,0.83 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"VERTICAL OFFSET. Set the correct vertical offset you desire.","RscStructuredText"],[]], [1113,"nc_background_visibility",[1,"Visbility",[0.402031 * safezoneW + safezoneX,0.874 * safezoneH + safezoneY,0.0360937 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[0,0,0,0],[-1,-1,-1,-1],"VISIBILITY. Toggle it.","RscStructuredText"],[]], [1114,"nc_background_info_soon",[1,"more features soon",[0.314375 * safezoneW + safezoneX,0.874 * safezoneH + safezoneY,0.0825 * safezoneW,0.022 * safezoneH],[1,1,1,0.3],[0,0,0,0],[-1,-1,-1,-1],"INFO. Future updates coming. Stay tuned","RscText"],[]], [1115,"nc_background_impressum",[1,"Voyager Compass 1.1",[0.304062 * safezoneW + safezoneX,0.94 * safezoneH + safezoneY,0.0825 * safezoneW,0.022 * safezoneH],[1,1,1,0.3],[0,0,0,0],[-1,-1,-1,-1],"Creator: Unknown_GTX & Flax","RscText"],[]], [2400,"nc_save",[1,"SAVE",[0.412344 * safezoneW + safezoneX,0.94 * safezoneH + safezoneY,0.04125 * safezoneW,0.022 * safezoneH],[0.07,0.07,0.07,1],[0.93,0.93,0.93,1],[0.07,0.07,0.07,1],"Permanently save changes. (stays even after restarting the game)","RscButton"],[], ["profileNamespace setVariable ['nc_settings',folder]; saveProfileNamespace;"]], [2401,"nc_close",[1,"X",[0.391719 * safezoneW + safezoneX,0.94 * safezoneH + safezoneY,0.0154688 * safezoneW,0.022 * safezoneH],[0.07,0.07,0.07,1],[0.93,0.93,0.93,1],[-1,-1,-1,-1],"Close without save.","RscButton"],[], ["(uiNamespace getVariable 'nc_dialogDisplay') closeDisplay 2"]], [2800,"ncShadow",[1,"",[0.391719 * safezoneW + safezoneX,0.709 * safezoneH + safezoneY,0.0103125 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[-1,-1,-1,-1],[-1,-1,-1,-1],"SHADOW. Enable the dropshadow for the cardinal points.","RscCheckBox"],[], [ncShadow, "folder set [10, (_this select 1)]; switch (_this select 1) do { case (0): { ncShadow = 0; }; case (1): { ncShadow = 2; };}; _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass;"]], [1901,"ncX",[1,"",[0.340156 * safezoneW + safezoneX,0.302 * safezoneH + safezoneY,0.0979687 * safezoneW,0.011 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"HORIZONTAL POSITION. Set the correct horizontal position you desire.","RscSlider"],[], [[/*range*/0,1, ncX], "folder set [0, (_this select 1)]; nc_barOffsetX = ((_this select 1) * safezoneH + safezoneY)"]], [1900,"nc_y",[1,"",[0.340156 * safezoneW + safezoneX,0.335 * safezoneH + safezoneY,0.0979687 * safezoneW,0.011 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"VERTICAL POSITION. Set the correct vertical position you desire.","RscSlider"],[], [[/*range*/0,1, ncY], "folder set [1, (_this select 1)]; nc_barOffsetY = ((_this select 1) * safezoneH + safezoneY); nc_marker_offset = ncMarkerY + nc_barOffsetY;"]], [1902,"nc_w",[1,"",[0.340156 * safezoneW + safezoneX,0.368 * safezoneH + safezoneY,0.0979687 * safezoneW,0.011 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"WIDTH. Exact range of visibility for points.","RscSlider"],[], [[/*range*/0,5, ncW], "folder set [2, (_this select 1)]; ncW = (_this select 1)"]], [1903,"nc_s",[1,"",[0.340156 * safezoneW + safezoneX,0.401 * safezoneH + safezoneY,0.0979687 * safezoneW,0.011 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"SPAN. Change the distance between the points.","RscSlider"],[], [[/*range*/1,3, ncSpan], "folder set [3, (_this select 1)]; ncSpan = (_this select 1)"]], [2100,"nc_type",[1,"",[0.319531 * safezoneW + safezoneX,0.511 * safezoneH + safezoneY,0.118594 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[-1,-1,-1,-1],[-1,-1,-1,-1],"TYPE. Work in progress.","RscCombo"],[], [["Battlegrounds","Arma 3"], "folder set [15, (_this select 1)]; ncType = (_this select 1)", ncTypeNr]], [1904,"nc_fontSize",[1,"",[0.340156 * safezoneW + safezoneX,0.555 * safezoneH + safezoneY,0.0979687 * safezoneW,0.011 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"SIZE-FONT. Determines the size of the individual cardinal points.","RscSlider"],[], [[/*range*/0.8,1.4, ncFontSize], "folder set [5, (_this select 1)]; ncFontSize = (_this select 1); _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass;"]], [1905,"nc_fontAlpha",[1,"",[0.340156 * safezoneW + safezoneX,0.588 * safezoneH + safezoneY,0.0979687 * safezoneW,0.011 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"TRANSPARENCY. Set the visibility of the whole compass.","RscSlider"],[], [[/*range*/0,1,ncAlphaNr], "folder set [7, (_this select 1)]; _clr = [0,0,0,(_this select 1)] call BIS_fnc_ColorRGBAtoHTML; _cutBelow = [0,1, _clr] call fnc_removeString; _cutAbove = [2,6, _cutBelow] call fnc_removeString; folder set [6, _cutAbove]; ncAlpha = _cutAbove; _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass;"]], [2103,"nc_font",[1,"",[0.319531 * safezoneW + safezoneX,0.665 * safezoneH + safezoneY,0.118594 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"FONT. Switch between different looks with the font.","RscCombo"],[], [["EtelkaMonospacePro","EtelkaMonospaceProBold","EtelkaNarrowMediumPro","LucidaConsoleB","PuristaBold","PuristaLight","PuristaMedium","PuristaSemiBold","RobotoCondensed","RobotoCondensedBold","RobotoCondensedLight","TahomaB"], "folder set [13, (_this select 1)];folder set [8, (nc_lb_fontOption select (_this select 1))]; ncFontOptionNr = (_this select 1); ncFontOption = nc_lb_fontOption select (_this select 1); _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass;", ncFontOptionNr]], [1005,"ncColor_code",[1,"",[0.326719 * safezoneW + safezoneX,0.621 * safezoneH + safezoneY,0.04125 * safezoneW,0.022 * safezoneH],[1,1,1,1],[0.03,0.03,0.03,1],[-1,-1,-1,-1],"","RscEdit"],[]], [2102,"ncColor",[1,"",[0.371094 * safezoneW + safezoneX,0.621 * safezoneH + safezoneY,0.0670312 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[-1,-1,-1,-1],[-1,-1,-1,-1],"COLOR. Choose between predefined colors.","RscCombo"],[], [["Custom","White","Black"], "folder set [14, (_this select 1)]; folder set [17, (nc_lb_colorOption select (_this select 1))]; ncColorOption = nc_lb_colorOption select (_this select 1); _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass;", ncColorNr]], [2801,"nc_invert",[1,"",[0.345312 * safezoneW + safezoneX,0.709 * safezoneH + safezoneY,0.0103125 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[-1,-1,-1,-1],[-1,-1,-1,-1],"INVERT. Switch between the option of the needles being at the top or bottom of the cardinal points.","RscCheckBox"],[], [ncInvert, "folder set [9, (_this select 1)]; ncInvert = (_this select 1); _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass;"]], [1906,"nc_markerY",[1,"",[0.340156 * safezoneW + safezoneX,0.841 * safezoneH + safezoneY,0.0979687 * safezoneW,0.011 * safezoneH],[-1,-1,-1,-1],[1,1,1,1],[-1,-1,-1,-1],"VERTICAL OFFSET. Set the correct vertical offset you desire.","RscSlider"],[], [[/*range*/-2,2, ncMarkerY], "folder set [12, (_this select 1)]; nc_marker_offset = (_this select 1) + nc_barOffsetY; ncMarkerY = (_this select 1);"]], [2802,"nc_visibility",[1,"",[0.391719 * safezoneW + safezoneX,0.874 * safezoneH + safezoneY,0.0103125 * safezoneW,0.022 * safezoneH],[-1,-1,-1,-1],[-1,-1,-1,-1],[-1,-1,-1,-1],"VISIBILITY. Toggle it.","RscCheckBox"],[], [ncMarkerVisibility, "folder set [11, (_this select 1)]; ncMarkerVisibility = (_this select 1)"]] ]; with uiNamespace do { nc_dialogDisplay = findDisplay 46 createDisplay "RscDisplayEmpty"; }; { _idc = _x select 0; _type = (_x select 2) select 7; _pos = (_x select 2) select 2; _tooltip = (_x select 2)select 6; _background_color = (_x select 2) select 4; _txt = (_x select 2) select 1; _display = uiNamespace getVariable "nc_dialogDisplay"; switch (_type) do { case ("RscText"): { _ctrl = _display ctrlCreate [_type, _idc]; _ctrl ctrlSetText _txt; //hint format ["x: %1, x: %2, x: %3, x: %4", _posx, _posy, _posw, _posh]; _ctrl ctrlSetTextColor [1, 1, 1, 1]; _ctrl ctrlSetBackgroundColor _background_color; }; case ("RscStructuredText"): { _ctrl = _display ctrlCreate [_type, _idc]; _ctrl ctrlSetText _txt; _ctrl ctrlSetTextColor [1, 1, 1, 1]; _ctrl ctrlSetBackgroundColor _background_color; }; case ("RscSlider"): { _sliderRange_start = ((_x select 4) select 0) select 0; _sliderRange_end = ((_x select 4) select 0) select 1; _sliderPos = ((_x select 4) select 0) select 2; _func = compile ((_x select 4) select 1); _ctrl = _display ctrlCreate [_type, _idc]; _ctrl sliderSetRange [_sliderRange_start, _sliderRange_end]; _ctrl sliderSetPosition _sliderPos; _ctrl ctrlAddEventHandler ["SliderPosChanged",_func]; }; case ("RscCombo"): { _ctrl = _display ctrlCreate [_type, _idc]; _func = compile ((_x select 4) select 1); for "_i" from 0 to (count ((_x select 4) select 0)-1) do { _lbItem = ((_x select 4) select 0) select _i; _index = _ctrl lbAdd _lbItem; }; _indexy = (_x select 4) select 2; _ctrl lbSetCurSel _indexy; _ctrl ctrlAddEventHandler ["LBSelChanged",_func]; }; case ("RscCheckBox"): { _ctrl = _display ctrlCreate [_type, _idc]; if ((_x select 4) select 0 == 1) then { _ctrl cbSetChecked true; }; _func = compile ((_x select 4) select 1); _ctrl ctrlAddEventHandler ["CheckedChanged",_func]; if (ncInvert == 1) then { _ctrl ctrlSetChecked true; }else{_ctrl ctrlSetChecked false;}; }; case ("RscButton"): { _ctrl = _display ctrlCreate [_type, _idc]; _ctrl ctrlSetText _txt; _func = compile ((_x select 4) select 0); _ctrl ctrlAddEventHandler ["ButtonClick",_func]; }; case ("RscEdit"): { _ctrl = _display ctrlCreate [_type, _idc]; _ctrl ctrlSetTextColor [1, 1, 1, 1]; _ctrl ctrlSetBackgroundColor [0, 0, 0, 1]; _ctrl ctrlAddEventHandler ["KeyUp",{ncColorOption = ctrlText ((uiNamespace getVariable "nc_dialogDisplay") displayCtrl 1005); _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass;}]; _ctrl ctrlSetText ncColorOption; }; }; _ctrl = _display displayCtrl _idc; _ctrl ctrlSetPosition _pos; _ctrl ctrlCommit 0; _ctrl ctrlSetTooltip _tooltip; } forEach nc_dialog_controls; }; fnc_showCompass = { systemchat "init fnc_showCompass"; disableSerialization; _nc_settings = [] call fnc_loadSettings; if (isNil "_nc_settings") then { _nc_settings = [0.499889,0.0346965,3.16098,1.86439,0,1.18143,"C0",0.753254,"PuristaLight",0,1,1,-0.0340903,5,1,0,"B1B1","FFFFFF"]; }; ncX = _nc_settings select 0; ncY = _nc_settings select 1; ncW = _nc_settings select 2; ncSpan = _nc_settings select 3; ncType = _nc_settings select 4; ncFontSize = _nc_settings select 5; ncAlpha = _nc_settings select 6; ncFontOption = _nc_settings select 8; ncInvert = _nc_settings select 9; ncShadow = _nc_settings select 10; ncMarkerVisibility = _nc_settings select 11; ncMarkerY = _nc_settings select 12; ncColorOption = "f9f9f9"; nc_barOffsetX = (ncX * safezoneW + safezoneX); nc_barOffsetY = (ncY * safezoneH + safezoneY); nc_marker_offset = ncMarkerY + nc_barOffsetY; ("compassTitle" call BIS_fnc_rscLayer) cutRsc ["RscTitleDisplayEmpty", "PLAIN"]; switch (ncShadow) do { case (0): { ncShadow = 0; }; case (1): { ncShadow = 2; };}; _comp = [ncType, ncInvert, ncFontSize, ncShadow, ncFontOption, ncAlpha, ncColorOption] call fnc_compileCompass; /// rendering of compass allUserMarkers = []; currentMarkers = []; combMarkers = []; ["0", "onEachFrame",{ _compassNeedle = ((uiNamespace getVariable "RscTitleDisplayEmpty") displayCtrl 3399); _compassNeedle ctrlSetPosition [nc_barOffsetX - (0.1/2),nc_barOffsetY,0.1,0.015 * safezoneH]; _compassNeedle ctrlCommit 0; { _ctrl = _x select 0; _pos = (_x select 1) / 100; _degreeControl = ((uiNamespace getVariable "RscTitleDisplayEmpty") displayCtrl _ctrl); _playerDir = (getDir player)/100; _controlPos = (ctrlPosition _degreeControl) select 0; if (_controlPos > ((ncW / 10 * safezoneW + safezoneX) - (0.1/2)) && _controlPos < (1 - ((ncW / 10 * safezoneW + safezoneX))- (0.1/2))) then { _degreeControl ctrlSetPosition [ nc_barOffsetX + ((_pos - _playerDir) / ncSpan) - (0.1/2),nc_barOffsetY,0.1,0.4]; }else{ _degreeControl ctrlSetPosition [ nc_barOffsetX + ((_pos - _playerDir) / ncSpan) - (0.1/2),nc_barOffsetY,0.0,0.4]; }; _degreeControl ctrlCommit 0; } forEach compass_pos; { _ctrl = _x select 0; _marker = _x select 1; _ctrl2 = _ctrl + 100; _playerDir = (getDir player)/100; _relativeDir = ([player, markerPos _marker] call BIS_fnc_relativeDirTo)/100; _MarkerControl = ((uiNamespace getVariable "RscTitleDisplayEmpty") displayCtrl _ctrl); _MarkerControl2 = ((uiNamespace getVariable "RscTitleDisplayEmpty") displayCtrl _ctrl2); _controlPos = (ctrlPosition _MarkerControl) select 0; _controlPos2 = (ctrlPosition _MarkerControl2) select 0; if (_controlPos > (((ncW / 10 * safezoneW + safezoneX) - (0.1/2)) * ncMarkerVisibility) && _controlPos < (((1 - (ncW / 10 * safezoneW + safezoneX))- (0.1/2)) * ncMarkerVisibility)) then { _MarkerControl ctrlSetPosition [ nc_barOffsetX + (_relativeDir / ncSpan) - (0.05/2),nc_marker_offset,0.05,0.09]; }else{ _MarkerControl ctrlSetPosition [ nc_barOffsetX + (_relativeDir / ncSpan) - (0.05/2),nc_marker_offset,0.00,0.09]; }; if (_controlPos2 > (((ncW / 10 * safezoneW + safezoneX) - (0.1/2)) * ncMarkerVisibility) && _controlPos2 < ((((1 - (ncW / 10 * safezoneW + safezoneX))- (0.1/2))) * ncMarkerVisibility)) then { _MarkerControl2 ctrlSetPosition [ nc_barOffsetX + (_relativeDir / ncSpan) - (3.6/ncSpan) - (0.05/2),nc_marker_offset,0.05,0.09]; }else{ _MarkerControl2 ctrlSetPosition [ nc_barOffsetX + (_relativeDir / ncSpan) - (3.6/ncSpan) - (0.05/2),nc_marker_offset,0.00,0.09]; }; _MarkerControl ctrlCommit 0; _MarkerControl2 ctrlCommit 0; } forEach combMarkers; //hint format ["degr: %1", getDir player]; }] call BIS_fnc_addStackedEventHandler; /// waitUntil {ncMarkerVisibility == 1;}; while {true} do { /// create user array [marker] { if !(_x in currentMarkers) then { _a = toArray _x; _a resize 15; if (toString _a == "_USER_DEFINED #") then { allUserMarkers pushBack _x; }; }; } forEach allMapMarkers; /// /// create double array ([marker], [idc,marker]) { if !(_x in currentMarkers) then { _display = uiNamespace getVariable "RscTitleDisplayEmpty"; _index = allUserMarkers find _x; _idc = 5500 + _index; _edit = _display ctrlCreate ["RscStructuredText", _idc]; _edit2 = _display ctrlCreate ["RscStructuredText", _idc + 100]; _edit ctrlSetPosition [-2, -2, 0.05, 0.05]; _edit2 ctrlSetPosition [-2, -2, 0.05, 0.05]; _img = getText (configfile >> "cfgMarkers" >> markerType _x >> "icon"); _txt = parseText format ["<img image='%1' align='center'/>", _img]; _edit ctrlSetStructuredText _txt; _edit2 ctrlSetStructuredText _txt; _edit ctrlCommit 0; _edit2 ctrlCommit 0; currentMarkers pushBack _x; combMarkers pushBack [_idc, _x]; //}; systemChat format ["created: %1", _x]; }; } forEach allUserMarkers; /// /// delete IF marker from [idc,marker] aint alive anymore { if !(_x in allMapMarkers) then { allUserMarkers = allUserMarkers - [_x]; currentMarkers = currentMarkers - [_x]; }; } forEach allUserMarkers; { if !((_x select 1) in allUserMarkers) then { _display = uiNamespace getVariable "RscTitleDisplayEmpty"; ctrlDelete (_display displayCtrl (_x select 0)); ctrlDelete (_display displayCtrl ((_x select 0)+100)); combMarkers = combMarkers - [_x]; }; } forEach combMarkers; /// sleep 0.2; }; }; fnc_compileCompass = { /// coordinates of compass angles compass_pos = [ [3400, -225 ,"SE" ], [3401, -210 ,"140"], [3402, -195 ,"165"], [3403, -180 ,"S" ], [3405, -165 ,"195"], [3406, -150 ,"210"], [3407, -135 ,"SW" ], [3408, -120 ,"240"], [3409, -105 ,"255"], [3410, -090 ,"W" ], [3421, -075 ,"285"], [3422, -060 ,"300"], [3423, -045 ,"NW" ], [3424, -030 ,"330"], [3425, -015 ,"345"], [3426, 0 ,"N" ], [3427, 015 ,"15" ], [3428, 030 ,"30" ], [3429, 045 ,"NE" ], [3430, 060 ,"60" ], [3431, 075 ,"75" ], [3432, 090 ,"E" ], [3433, 105 ,"105" ], [3434, 120 ,"120" ], [3435, 135 ,"SE" ], [3436, 150 ,"150" ], [3437, 165 ,"165" ], [3438, 180 ,"S" ], [3439, 195 ,"195" ], [3440, 210 ,"210" ], [3441, 225 ,"SW" ], [3442, 240 ,"240" ], [3443, 255 ,"255" ], [3445, 270 ,"W" ], [3446, 285 ,"285" ], [3447, 300 ,"300" ], [3448, 315 ,"NW" ], [3449, 330 ,"330" ], [3450, 345 ,"345" ], [3451, 360 ,"N" ], [3452, 375 ,"15" ], [3453, 390 ,"30" ], [3454, 405 ,"NE" ], [3455, 420 ,"60" ], [3456, 435 ,"75" ], [3457, 450 ,"E" ], [3458, 465 ,"105" ], [3459, 480 ,"120" ], [3460, 495 ,"SE" ], [3461, 510 ,"150" ], [3462, 525 ,"165" ], [3463, 540 ,"S" ], [3464, 555 ,"195" ], [3465, 570 ,"210" ], [3466, 585 ,"SW" ] ]; compass_pos_a3 = [ [3410, 0 ,"no" ] ]; /// _nc_lb_type = [compass_pos, compass_pos_a3]; disableSerialization; params ["_compassType", "_ncNeedle","_ncFontSize","_ncShadow","_ncFontOption", "_ncAlpha", "_ncColorOption"]; switch (_ncShadow) do { case (0): { _ncShadow = 0; }; case (1): { _ncShadow = 2; }; default { _ncShadow = 2; };}; _display = uiNamespace getVariable "RscTitleDisplayEmpty"; for "_i" from 3399 to 3499 do { ctrlDelete (_display displayCtrl _i); }; _compass = _nc_lb_type select _compassType; _compassNeedle = _display ctrlCreate ["RscStructuredText", 3399]; _compassNeedle ctrlSetPosition [-2, -2, 0.05, 0.05]; _compassNeedle ctrlSetStructuredText parseText format["<t shadow=2><t shadowColor='#ff0000' align='center' size='%1' color='#f9f9f9'>|</t>", 0.65]; for "_i" from 0 to (count _compass - 1) do { _idc = ((_compass select _i) select 0); _dir = ((_compass select _i) select 2); _arrayIndex = _i;//_compassType find _x; nc_sizeX = 0.65 * _ncFontSize; if (_arrayIndex % 6 == 3) then { nc_sizeX = 1 * _ncFontSize; }; if (_arrayIndex % 6 == 0) then { nc_sizeX = 0.8 * _ncFontSize; }; _edit = _display ctrlCreate ["RscStructuredText", _idc]; _edit ctrlSetPosition [-2, -2, 0.05, 0.05]; _var_needle = ""; switch (_ncNeedle) do { case (1): { _var_needle = _dir + "<br />|</t>"; }; case (0): { _var_needle = "|<br />" + _dir + "</t>"; }; }; _edit ctrlSetStructuredText parseText ("<t shadow=" + str _ncShadow + "><t shadowColor='#000000' align='center' size='" + str nc_sizeX + "' font='" + _ncFontOption + "' color='#" + _ncAlpha + _ncColorOption + "'>" + _var_needle); _edit ctrlCommit 0; }; }; waitUntil {!isNull player}; [] spawn fnc_showCompass; [] spawn { while {true} do { waitUntil {!isNull (findDisplay 49)}; disableSerialization; _display = findDisplay 49; _ctrl = _display ctrlCreate ["RscButton", 3399]; _ctrl ctrlSetPosition [ (1 * (((safezoneW / safezoneH) min 1.2) / 40) + (safezoneX)), (2.2 * ((((safezoneW / safezoneH) min 1.2) / 1.2) / 25) + safezoneY), (15 * (((safezoneW / safezoneH) min 1.2) / 40)), (1 * ((((safezoneW / safezoneH) min 1.2) / 1.2) / 25))]; _ctrl ctrlSetActiveColor [0.204,0.286,0.369,1]; _ctrl ctrlSetText "COMPASS OPTIONS"; _ctrl ctrlCommit 0; _ctrl buttonSetAction "(findDisplay 49) closeDisplay 1; [] call fnc_showSettings;"; waitUntil{isNull (findDisplay 49)}; }; }; 2 1 Share this post Link to post Share on other sites
Leopard20 813 Posted August 30, 2018 @Unknown_GTX @Flax This is really awesome guys! Thanks! Do you mind if I use it in my mission? Don't worry, I'll give you proper credits! ;) Share this post Link to post Share on other sites
LSValmont 789 Posted December 26, 2018 On 30/4/2018 at 11:36 PM, aussie battler said: @bob_the_k If you still want the script you can grab it here: https://www.dropbox.com/s/vib3bk7aea5cah6/fn_voyagerCompass1_1.sqf?dl=1 Aussie, how do I make the Compass appear at the bottom of the screen when using the script version? Currently it appears at the top. Share this post Link to post Share on other sites
LSValmont 789 Posted December 26, 2018 On 12/10/2017 at 8:24 AM, Unknown_GTX said: workshop or script version? Hey Unknown! The mod version seems to be v1.1.26 while the script version is still at 1.1? Any chance for an update? Those performance improvements are awesome! Share this post Link to post Share on other sites
