Jump to content
Dwarden

Arma 3 STABLE Server 2.18 "profiling / performance binary" feedback

Recommended Posts

perf02 works for "vanilla" King of the Hill servers! - had "session lost" before.

I'm hoping the fix will be distributed to everyone soon.


Thanks for the fast and good work! 😘

  • Thanks 1

Share this post


Link to post
Share on other sites

1.90.145440 new PROFILING branch with PERFORMANCE binaries, v03, server and client, windows 32/64-bit, included linux 32-bit server

+ fixed more of server and linux server path issues

 

note:

for client since 145146 build the `cache.ch` now goes into

``C:\Users\%windowsusername%\AppData\Local\Arma 3\DataCache\``

unless defined -profiles= path

 

if defined then the `cache.ch` is now generated at `-profiles=` directory

into sub-folder `\DataCache\`

 

temporary workaround:

we found out that sometimes create `cache.ch` fails because of special character in windows username

use "-profiles=test" startup command-line to try run game

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 2
  • Thanks 1

Share this post


Link to post
Share on other sites

1.90.145451 new PROFILING branch with PERFORMANCE binaries, v04, server and client, windows 32/64-bit, included linux 32-bit server

+ fixed more of issues with paths vs special chars

+ improved logging to analyze errors ( needs new signed \Dta\languagecore_f.pbo )

+ fixed crashes (e.g. related to HUD)

 

attention: usage of 145451 client and server recommended , in case of issues send us the RPTs from both sides

 

note:

for client since 145146 build the `cache.ch` now goes into

``C:\Users\%windowsusername%\AppData\Local\Arma 3\DataCache\``

unless defined -profiles= path

 

if defined then the `cache.ch` is now generated at `-profiles=` directory

into sub-folder `\DataCache\`

 

temporary workaround:

we found out that sometimes create `cache.ch` fails because of special character in windows username

use "-profiles=test" startup command-line to try run game

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 2

Share this post


Link to post
Share on other sites

1.90.145454 new PROFILING branch with PERFORMANCE binaries, v05, server and client, windows 32/64-bit, included linux 32-bit server

+ more logging vs recent cache / signature issues

+ fixed more crashes

 

attention:

usage of 145454 client and server recommended ,

in case of issues send us the RPTs from both sides

 

another important note for recent profiling binaries,
use ``-servermod=`` for mods not available at client,
which are used only at server, for mods at both use ``-mod=``

(this will become mandatory for stable main branch too)

 

make sure the server doesn't have obsolete files in-between default data , see example :

https://forums.bohemia.net/forums/topic/222192-190-update-troubleshooting/?do=findComment&comment=3344880

 

note:

for client since 145146 build the `cache.ch` now goes into

``C:\Users\%windowsusername%\AppData\Local\Arma 3\DataCache\``

unless defined -profiles= path

 

if defined then the `cache.ch` is now generated at `-profiles=` directory

into sub-folder `\DataCache\`

 

temporary workaround:

we found out that sometimes create `cache.ch` fails because of special character in windows username

use "-profiles=test" startup command-line to try run game

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 2

Share this post


Link to post
Share on other sites

Wow suddenly fast and furious performance binary releases in version 1.90 keep up the good work!

Share this post


Link to post
Share on other sites
16 hours ago, dukenukem. said:

Wow suddenly fast and furious performance binary releases in version 1.90 keep up the good work!

Except now we have Hotfix 2...lol...Will have to wait for more performance versions

  • Like 1

Share this post


Link to post
Share on other sites

all in perf/prof branch 1.90 v05
got into 1.90 hotfix 2 of main branch

  • Like 1

Share this post


Link to post
Share on other sites

so fine to stay on perf branch, right?

Share this post


Link to post
Share on other sites

Well if your version just upgraded to latest v1.90.145751 ( or something like that ) then you are technically running performance branch based on above from Dwarden

If you haven't upgraded then sure keep running the performance version you have

  • Like 1

Share this post


Link to post
Share on other sites

1.90.145472 new PROFILING branch with PERFORMANCE binaries, v06, server and client, windows 32/64-bit, included linux 32-bit server

+ sync with 1.90.145471 hotfix 02

 

important note:
use ``-servermod=`` for mods not available at client,

which are used only at server, for mods at both use ``-mod=``

(this will is mandatory for stable 1.90 main branch too)

 

make sure the server doesn't have obsolete files in-between default data , see example :

https://forums.bohemia.net/forums/topic/222192-190-update-troubleshooting/?do=findComment&comment=3344880

 

note:

since 145146 (client, server, headless client) generated `cache.ch` within path

``C:\Users\%windowsusername%\AppData\Local\Arma 3\DataCache\``

unless defined `-profiles=` path via command-line param

 

when defined then the `cache.ch` generates at `-profiles=` directory into sub-folder `\DataCache\`

 

temporary workaround (resolved since hotfix 02 (1.90.145471)):

sometimes create `cache.ch` fails because of special character in windows username or paths

use "-profiles=test" startup command-line to try run game

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 1
  • Thanks 2

Share this post


Link to post
Share on other sites

1.90.145575 new PROFILING branch with PERFORMANCE binaries, v07, server and client, windows 32/64-bit, included linux 32-bit server+

+ several improvements for administrating servers

Quote

1.
new dedicated-server server.cfg setting:
kickTimeout[] = { {0,-1},{1,180},{2,180},{3,180}} ;

kick ID (type to determine from where the kick originated e.g. admin or votekick etc.)
// 0 - manual kick (vote kick, admin kick, bruteforce detection etc.)
// 1 - connectivity kick (ping, timeout, packetloss, desync)
// 2 - BattlEye kick
// 3 - harmless kick (wrong addons, steam timeout or checks, signatures, content etc.)

timeout =  in seconds how long until kicked player can return
 >0 seconds
 -1 until missionEnd
 -2 until serverRestart

2.
this is accompanied with new server.cfg event-handler `onUserKicked`

returned is [_uid of kicked player, kick type ID, reason as string]

see https://community.bistudio.com/wiki/ArmA:_Server_Side_Scripting

3.
admin command #kick gets optional comment param (#kick id sometext)
admin command #ban gets optional comment param (#ban id sometext)

4.
ban.txt now writes into profiles dir (to avoid multi instance collision)

5.
new kick.txt with list of votekicked, admin kicked (console, serverCommand)
those are also same ones within kickTimeout thresholds
kick.txt now writes into profiles dir (to avoid multi instance collision)

6.
improved setting of allowedVoteCmds[] to add one value, which covers % per side
which covers % of votes per side
e.g. {"kick", true, true, 0.55, 0.55};
means kicked in case either 55% of all players
or 55% of players from his side (west, east, resistance, civilian) voted to kick him

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 2
  • Thanks 2

Share this post


Link to post
Share on other sites

1.90.145580 new PROFILING branch with PERFORMANCE binaries, v08, server and client, windows 32/64-bit, included linux 32-bit server+

+ fixes for administrative features in previous build 1.90.145575

 

... for details about those see previous post

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 1

Share this post


Link to post
Share on other sites

1.90.145586 new PROFILING branch with PERFORMANCE binaries, v09, server and client, windows 32/64-bit, included linux 32-bit server+

+ fixes for administrative features in previous build 1.90.145580

 

... for details about those see 1.90.145575 build post

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

Share this post


Link to post
Share on other sites

1.90.145599 new PROFILING branch with PERFORMANCE binaries, v10, server and client, windows 32/64-bit, included linux 32-bit server+

+ more fixes for administrative features in previous build 1.90.145586

... for details about those see 1.90.145575 build post

+ new server.cfg settings votingTimeOut, roleTimeOut, briefingTimeOut, debriefingTimeOut, lobbyIdleTimeout

 

Quote

votingTimeOut = 60; //60 s for voting
//alternative syntax : votingTimeOut[] = {60, 90}; // 60 seconds for ready, 90 for notReady
roleTimeOut = 90; // 90 s for lobby
//alternative syntax : roleTimeOut[] = {90, 120}; // 90 seconds for ready, 120 for notReady
briefingTimeOut = 60; // 60 s for briefing
//alternative syntax : briefingTimeOut[] = {60, 90}; // 60 seconds for ready, 90 for notReady
debriefingTimeOut = 45; // 45 s for debriefing
//alternative syntax : debriefingTimeOut[] = {45, 60}; // 45 seconds for ready, 60 for notReady
lobbyIdleTimeout = 300; // (+5 seconds vs any of above)>defined value
//no alternative syntax

//Independent of set lobbyIdleTimeout in the config file, it will be at least
//MAX(votingTimeout, lobbyTimeout, briefingTimeout, debriefingTimeout) + 5 seconds.
//by default, this makes it 300 seconds of time for people in lobby and 95 in roleTimeout or briefing screen

 

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 1

Share this post


Link to post
Share on other sites

what is lobbyIdleTimeout ?

 

// 5 seconds for ready, 10 for notReady

what does this mean? shouldnt it be the actual values of your samples?

Share this post


Link to post
Share on other sites

@.kju

 

while it depends on mission and server setting

this is to prevent players to occupy slots in lobby

such situation may lead to blocked mission-selection or mission-start or prevent those slots to be usable by active players etc.

 

note: there's no visualization in UI of how much time the player has left.

 

about the syntax, two integers array  for setting different timeouts when players are ready or not.

They can also have single integer value, both Ready and notReady parameters are then set to single given value

 

  • Like 1
  • Thanks 1

Share this post


Link to post
Share on other sites

1.90.145620 new PROFILING branch with PERFORMANCE binaries, v11, server and client, windows 32/64-bit, included linux 32-bit server

+ crash fixes

+ fixed waitUntil (performance regression)

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 3

Share this post


Link to post
Share on other sites

there were some questions about the recent #perf_prof_branch 1.90.145620 build fix of waitUntil
it fixes the situation when waitUntil statement returns nil, it got stuck on that and cluttered the script scheduler
now waitUntil is aborted and the error message is displayed to the user like some examples below:

 

`Error Type Bool expected Bool`
`Error Type Any expected Bool`
`Error Type Nothing expected Bool`
`Error Type Obj expected Bool`


etc.

  • Like 3

Share this post


Link to post
Share on other sites
On 4/16/2019 at 4:07 PM, Dwarden said:

1.90.145599 new PROFILING branch with PERFORMANCE binaries, v10, server and client, windows 32/64-bit, included linux 32-bit server+

+ more fixes for administrative features in previous build 1.90.145586

... for details about those see 1.90.145575 build post

+ new server.cfg settings votingTimeOut, roleTimeOut, briefingTimeOut, debriefingTimeOut, lobbyIdleTimeout

 

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

Can the roleTimeout, briefingTimeout, debriefingTimeout or lobbyIdleTimeout be disabled in any way? While these settings are probably great for KOTH servers, they are already a major headache on our group's coop server. Our typical operation starts with organising members into roles on the slotting screen until all necessary roles are filled, then proceeding through to a spawn area where the mission is planned. These settings are kicking members who are just waiting for us to get ourselves organised.

 

Additionally, is there any idle timer running once in-mission? A couple of our members have been kicked after going all the way through with messages indicating that it is again an idle timer. They probably were idle (people often go AFK at this stage) but this isn't something we want. Thanks

  • Like 1

Share this post


Link to post
Share on other sites

I agree to fourjays comment! We need a way to disable this Idle-Thingy realy quick! Our HC have been kicked from the Lobby for ideling. An in our Clan, the people are sitting up to 30 minutes in the Lobby doing nothing...

  • Like 1

Share this post


Link to post
Share on other sites

1.92.145963 is sync with 1.92.main

 

@Farantis @fourjays it's known bug, resolved internally (will be in upcoming profiling) vs HC

atm. you can set some high values in seconds those 4 (as long as you need for the session)

 

note:

 

something what may interest server admins, official Arma 3 servers use :

 

Warlords:


votingTimeOut = 240; //60 s for voting //alternative syntax : votingTimeOut[] = {60, 90}; // 60 seconds for ready, 90 for notReady

roleTimeOut = 360; // 90 s for lobby //alternative syntax : roleTimeOut[] = {90, 120}; // 90 seconds for ready, 120 for notReady

briefingTimeOut = 240; // 60 s for briefing //alternative syntax : briefingTimeOut[] = {60, 90}; // 60 seconds for ready, 90 for notReady

debriefingTimeOut = 180; // 45 s for debriefing //alternative syntax : debriefingTimeOut[] = {45, 60}; // 45 seconds for ready, 60 for notReady

lobbyIdleTimeout = 300; // (+5 seconds vs any of above)>defined value //no alternative syntax //Warlords idle set

 

all other servers


votingTimeOut = 360; //60 s for voting //alternative syntax : votingTimeOut[] = {60, 90}; // 60 seconds for ready, 90 for notReady

roleTimeOut = 540; // 90 s for lobby //alternative syntax : roleTimeOut[] = {90, 120}; // 90 seconds for ready, 120 for notReady

briefingTimeOut = 360; // 60 s for briefing //alternative syntax : briefingTimeOut[] = {60, 90}; // 60 seconds for ready, 90 for notReady

debriefingTimeOut = 300; // 45 s for debriefing //alternative syntax : debriefingTimeOut[] = {45, 60}; // 45 seconds for ready, 60 for notReady

lobbyIdleTimeout = 480; // (+5 seconds vs any of above)>defined value //no alternative syntax //COOP idle set

 

combined with

 


kickTimeout[] = { {0,-1},{1,181},{2,182},{3,183}} ;

// {kickID, timeout} //kick ID (type to determine from where the kick originated e.g. admin or votekick etc.)

// 0 - manual kick (vote kick, admin kick, bruteforce detection etc.)

// 1 - connectivity kick (ping, timeout, packetloss, desync)

// 2 - BattlEye kick

// 3 - harmless kick (wrong addons, steam timeout or checks, signatures, content etc.)

// timeout = in seconds how long until kicked player can return

// >0 seconds

// -1 until missionEnd

// -2 until serverRestart?

 

tho, for test some servers may use -2 or high value in seconds for the manual kick

 

  • Thanks 2

Share this post


Link to post
Share on other sites

1.92.145643 new PROFILING branch with PERFORMANCE binaries, v00, server and client, windows 32/64-bit, included linux 32-bit server

+ sync with 1.92.main branch

 

v01 skipped

 

1.92.145649 new PROFILING branch with PERFORMANCE binaries, v02, server and client, windows 32/64-bit, included linux 32-bit server

+ crash fixes (not included in 1.92.main yet)
+ no more headless-client kick due to idleTimeout

+ fixed waitUntil (performance regression) and many commands errors improved for this fix

 

https://www.dropbox.com/sh/582opsto4mmr8d8/3BSy9PdRGm

https://drive.google.com/folderview?id=0B03-H4YIbhkFMUt5RzNqZjFlNGs


available via STEAMclient/STEAMcmd as branch too,

read https://community.bistudio.com/wiki/Arma_3_Steam_Branches#Arma_3_Server

 

BIForum feedback: https://forums.bistudio.com/topic/160288-arma-3-stable-server-184-performance-binary-feedback/?do=getLastComment

 

Arma anything discord:  https://discord.gg/arma

  • Like 1

Share this post


Link to post
Share on other sites

Problem solved: All Timeouts set to -1 has done the Job (We are a closed Community and do not need something like Timeout Kicks)

Share this post


Link to post
Share on other sites
24 minutes ago, Farantis said:

Problem solved: All Timeouts set to -1 has done the Job (We are a closed Community and do not need something like Timeout Kicks)

 

well that workaround is unforeseen consequences (aka not what is supposed to work)

so please update to the latest profiling branch / performance binaries with build >=45469 which have engine fix and recognize HC correctly

Share this post


Link to post
Share on other sites

We don't need just the HC - we need to shut this off completly!

And i just got a report that -1 sets the timeout to 10 Minutes...

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now

×