scruffy

Hey determity, good job. Can you also send me the marker missions, then I'll put it into the next versions. I had also already looked at UMB Colombia and thought that might be a nice terrain for an Escape. Small thing: If you do any other terrains in the future, best do a "clean" version first without other addons, it's easier to add when no additional mods are needed. No big deal here, I'll just ctrl+f the braf_ boatsin mission.sqm. Also thank you to aussie battler for helping 👍

I'll try sometime in the future, but I'll wait a bit for new BIOS versions and what I read. Some seem to have problems running even 3600Mhz, though that seems to be with other mainboard manufacturers. I've got a Gigabyte Aorus Elite. Until then I'm happy with what I ran before and that it's stable. Thanks for the tests everyone, I'm tempted to get new RAM, as I probably won't get a new GPU anytime soon :D

I upgraded my CPU from a 3700x to a 5800x and did some benchmarks. YAAB 1.00 | Arma 2.00 1080p standard (CMA AVX2 malloc) 5800X (Eco mode 65W) | 2x16 GB DR 3600 MHz 16-18-18-36 1T | GTX 1080ti (11 GB) | SSD FPS: 61,9 min | 89,1 avg | 139 max 1080p Ultra (CMA AVX2 malloc) FPS: 44,5 min | 67,4 avg | 94,8 max Compared to the "old" 3700x I now get on Ultra nearly what I had on Standard preset before. Here is the post what the old one managed with different RAM settings, and here is a comparison graph:

Did some testing with RAM speed myself, following Grooves procedure: YAAB 1.00 | Arma 2.00 1080p standard (CMA AVX2 malloc) 3700X @stock | GTX 1080ti (11 GB) | SSD 2x16 GB DR 2133 MHz 15-15-15-36 2T (aka "what is a BIOS?" auto setting) FPS: 33,7 min | 49,7 avg | 72,8 max 2x16 GB DR 3200 MHz 16-18-18-36 1T (aka cheap RAM kit) FPS: 39,3 min | 61,2 avg | 85,7 max 2x16 GB DR 3600 MHz 18-19-19-39 1T (XMP for my kit) FPS: 39,2 min | 63,4 avg | 91,8 max 2x16 GB DR 3600 MHz 16-18-18-36 1T (DRAM Calculator Fast timings) FPS: 43,1 min | 67,5 avg | 96,3 max YAAB 1.00 | Arma 2.00 1080p Ultra (CMA AVX2 malloc) 3800X @stock | GTX 1080ti (11 GB) | SSD 2x16 GB DR 2133 MHz 15-15-15-36 2T (aka "what is a BIOS?" auto setting) FPS: 25,8 min | 35,5 avg | 58,4 max 2x16 GB DR 3200 MHz 16-18-18-36 1T (aka cheap RAM kit) FPS: 30,7 min | 46,8 avg | 68,3 max 2x16 GB DR 3600 MHz 18-19-19-39 1T (XMP for my kit) FPS: 33,5 min | 45,5 avg | 71,2 max 2x16 GB DR 3600 MHz 16-18-18-36 1T (DRAM Calculator Fast timings) FPS: 34,5 min | 51,5 avg | 75,3 max And to see a bit more GPU limit with only 5 runs averaged: YAAB 1.00 | Arma 2.00 200% res-scale@1080p = UHD Ultra (CMA AVX2 malloc) 3800X @stock | GTX 1080ti (11 GB) | SSD 2x16 GB DR 2133 MHz 15-15-15-36 2T (aka "what is a BIOS?" auto setting) FPS: 25 min | 36,2 avg | 55,3 max 2x16 GB DR 3200 MHz 16-18-18-36 1T (aka cheap RAM kit) FPS: 29,6 min | 41,9 avg | 64,2 max 2x16 GB DR 3600 MHz 18-19-19-39 1T (XMP for my kit) FPS: 29,4 min | 42,6 avg | 67,6 max 2x16 GB DR 3600 MHz 16-18-18-36 1T (DRAM Calculator Fast timings) FPS: 30 min | 44,9 avg | 76,4 max

I updated that post a bit, since some things changed in the last three years ;)

There's still some problems with most of the new templates that will need to be fixed for a proper release. You might spawn outside the shed on that version of the prison, two of the roadblocks are kind of broken, towers on new com centers could be destroyed resulting in the box being unreachable, etc.

No problem here, starting just vanilla A3 and loading this unpacked version of build 137: https://www.dropbox.com/sh/ifs72kdf7yt7ose/AABvgxdf-IdGlh2JUuG_4dsRa?dl=0 I'm using mikeros ExtractPBO to unpack .pbos Also I sometimes noticed when loading a mission in Eden it will without error just load into VR world, I then have to open the mission again so it loads the proper island. That's not what you are seeing? We played the last few days (also CUP) and can attest to the AI being all around deadlier. No idea why we didn't notice before, maybe we were lucky with our island choices? We definitely didn't notice the longer spotting distances on Porto :D

I don't know if it will interfere, but the units are already cached, so even if not it won't really help. You can adjust the parameter for spawn distance already, so maybe put that on low for better performance, especially when on an island with many zones. Combined with a long view distance you might be able to spot them spawning in though, for example when observing a camp from a hill while the rest of the team moves in. Replacing the units through mission.sqm editing is easy, or changing the probability, but adding something is hard. You'd have to change that Item270 to something else, I think they have to be numbered consecutively, I think the id needs to be unique too, and theres a number somewhere up top saying how many items there are. And you'd have to get your position from another mission. So it's not worth it adding it by hand to the mission.sqm, just unpack the .pbo and open up the mission in the editor, place everything there. We probably won't change the mission.sqm on an already working island, so you can just replace it again when we do a new code update. Are you playing the RHS version by chance? There is currently a bug with most of their units after one of the new Arma updates, so they mostly die from a single hit. See here: So in addition to the AI now spotting you earlier they don't need to hit your head, they probably don't shoot better, but all those previously wounding shots are lethal now. Regarding the AI skill settings, I remember them being broken and/or inconsistent in MP some time ago. They were disabled in the mission back then. No idea if BIS properly fixed that, and if the mission setting is active again. That parameter might not change any of their skills, I'll have to ask Neo about that.

Wrong markername is now fixed on dev build 136 Thanks for reporting! Only civilian units used are cars, if you see a civilian on foot he crashed. On a few islands (Tanoa, Malden 2035 and I think something by Icebreakr) you may find empty boats next to piers and in harbours. Loadout depends on the preconfigured loadout of the units, we spawn them as if you just place whats available in the editor (apart from scopes/NVG/map/compass). So the answer is yes, the mods you use have a big influence. Edit: I'm stupid, uploaded an unfinished villagemarkers file for Lythium... Should be fixed now on build 137, but as we don't have Lythium on the server I only tested my local version. Can you please try again and tell me if it's still broken? No private release, all our dev versions (including the ones I completely break when I try to write a script) can be found here: ftp://escape@anzp.de Version was changed on dev build after the last full release, name ingame should be "1.9.0 dev" since somewhere around build 125 Thanks, that was written before RHS added a "normal" crate, changed in dev build 136 As lethargic said, all unit types are pulled from UnitClasses.sqf, so you don't need to change anything else for a mod version. About the rest: 1) No spawn rate, only civilian cars exist. You can find empty boats on Tanoa and maybe 2 or 3 other islands, but those are handplaced for these islands (with %-to-exist) 2) Prison guards are spawned in ..\functions\Server\fn_InitServer.sqf, if the spawned unit has flashlight/NVGs they might keep them, but might be removed randomly. Look at line 583ff (Every other unit spawned also has their base loadout, but NVG/Map/Compass/GPS/attachments will be removed most of the time. They then might get an attachment added again randomly from the array "a3e_arr_Scopes" in unitclasses. Don't know where the function for that is right now) 3) Placement of statics and vehicles are set in the template, you can find all of them under ..\functions\templates, the type used is an array from UnitClasses. Infantry on camps is spawned by ..\functions\DRN\fn_InitGuardedLocations.sqf, array is "a3e_arr_Escape_InfantryTypes" from UnitClasses In devbuild there's also ..\functions\DRN\fn_GarrisonUnits.sqf with a separate number for a few specific buildings used in the templates. 4) Helicopters are spawned in on preplaced markers (I think three, for example "drn_searchChopperStartPosMarker"), location depends on the island of course, somewhere on an airfield. But apart from the first search chopper (which is still hovering instead of waiting on the ground, that's on the to-do list) they are only spawned in when needed and don't exist prior to the mission deciding "I'll drop a bunch of paratroopers now". You could place some by hand as with boats, but that would be specific for that mission again.

Nearly finished the campaign, just need to clean up now and probably find some memories. I really like it, very well made and it's something different from normal Arma missions. The memory effect and switching between the two is impressive. Something that was a bit unclear for me: So that is why I had to aim so high... The VR strike mission was also a bit of trial and error, but without restarting. Both the wildcat and Abigail drone did nothing for me and the CAS plane with laserguided bomb also never dropped the bomb. I had the laser active on the already disabled truck, everyone else was dead. Had to call in mortar fire until one landed close enough. On the VR mines mission when the civilians were spawned after clearing the very last objective, 4 of them were thrown in from the side and a few meters in the air. They obviously died on landing, but that didn't seem to count as a casualty, because I was complimented for finding all UXOs.

Can you maybe spawn those remnants as another type of submunition?

To maybe save you some searching: A velociraptor addon had that effect for me

All extraction positions are chosen from a handplaced pool, which was hardcoded to exactly 8 before. At each location there are two markers on which an invisible heliH is spawned for the two extraction choppers. I think the problem with no reaction to smoke grenades was that because of a small error the visible marker when playing was spawned on the second preplaced marker, while the trigger is checking for smokegrenades near the first one. Especially on newer missions I placed those two markers further apart than before (if the landing zone was big enough) to try and minimize the times the AI pilots would crash into each other. Because of that the issue was kind of random and we couldn't reproduce it in testing (only playing "live") as the code worked, you just stood at the wrong position. The marker on a completely wrong position (probably 0,0,0) as in your screenshot is something else that we haven't seen yet. I guess it could be a problem with my code for checking how many markers are available when I made more than 8 possible. The new debug messages in .rpt from the new dev version will probably help with that, so please send the servers .rpt if possible if it happens again. And thank you again for reporting and helping us here :)

jgaz-uk: I added some additional debug stuff for the extraction to the .rpt, please try build 127 from the development version at ftp://anzp.de/development/ Edit: I think I found the error, the bacon will guide the way ;) If it works we'll do a hotfix release It also includes missions for FFAA's Lythium terrain which I finished today.

1) If it happens again, could you or someone else as logged in admin check the debug console (in Esc menu, put it in one of the 4 "watch" fields) for the variable a3e_var_Escape_ExtractionMarkerNo ? But I double checked Everon (mod doesn't matter) and the markers are in the right spots and all worked when triggering the extraction there. 2) That's right, units will randomly get some NVGs by the mission. For all WW2 packs you should disable it in parameters (NVG-Goggles and TWS Scopes) for immersion domokun: As Shadow quoted, it's not guaranteed to work on anything but a dedicated server. It seemed to work without errors when Neo and me last tested it hosting ourself quite a while ago, but there are a bunch of reports from others who had problems. You could try, maybe you are lucky. jgaz-uk: Can you send us your servers and a clients .rpt from that session? We had that happen on a mission too, we suspected some mods grenades to not work anymore, but all tests so far couldn't reproduce it. An admin can spawn the helicopters with [3] spawn A3E_fnc_RunExtraction; where 3 is an example for the the variable a3e_var_Escape_ExtractionMarkerNo

Hey Talyn First, let me thank you for remaking this classic :) Sadly the mission crashes our server, just when having the file in the mpmissions folder. So I investigated and it's not your fault, but BIS MP compatibility... The default #include params are (currently ?) broken and seems like they have been for a while. If you put them there by hand it works: I haven't played the mission properly yet, but already have a small suggestion: Maybe place one or two empty backpacks in the crates, as apart from MG, RPG and medic no unit has a backpack and you can't pick up the explosives without one. Edit: Tried it today, hasn't lost a bit of difficulty. The two RPG units are missing their uniform on our server, though. Maybe something on our end. But we blew up the convoy in our briefs :D Regards Scruffy

Are there US forces available in IFA3? We don't use it, so I will probably not port it to the terrains. Currently I'm working on Lythium, Comcenters are done but villagemarkers are a chore...

Damn, I knew I'd mess something up. The AT stuff is just a version for ourselves using our uniforms and a whole bunch of other addons we use. They are basically the old RHS+CAF versions plus a lot of missing stuff and errors for anyone who would try to use it. I deleted those files from the archive, still the same link. Sorry for the confusion and thank you for asking domokun. rudyreyes: We tried RHS-US on Abramia yesterday, only two players but no problems with units sinking beneath the ground. Mostly northern and middle part of island if that matters. I still think it is a conflict of different versions of the island on your side. daedum: As Neo said, it depends very much on the island (and location on there). You get a few different types of enemy spawns: - Villagemarkers: Marker areas placed on the map beforehand over towns/villages/houses/bases and all places that then spawn one or more groups (depending on size) to patrol there if you get close enough - search groups: spawned randomly in the "inbetween" areas. If unaware they might stick to roads, but can be found everywhere. If you are seen somewhere they will be sent to search for you in that area - Guards: spawned around the camps, comcenters use preplaced locations, mortar/ammo/vehicle camps and roadblocks just need enough space - random traffic: spawned somewhere on a road randomly, then sent to one of several preplaced markers on the edges of the island. Depending on the roadnet, your location, spawn distance and marker placement they might all use the same route because there is nothing else available, so you sometimes see very heavy traffic in a specific location - "surprises": all additional stuff the enemy might send your way if they spotted you like trucks with reinforcements or a drop chopper (or the artillery) Apart from the dense roadnet Malden 2035 is an island with a dense grid of structures. There are a lot of small houses and farms in between the villages and towns, and most of them have villagemarkers, so you are never far from the next group. So it's harder to break contact, you will be spotted more often and the AI commander can easily send his search groups to you, which will make it harder to run, you are spotted again, meanwhile some enemy traffic comes around and when you finally get to search the bodies for much needed amunition some paratroopers are dropped on your head... Best to stay hidden as much as possible and avoid civilization as best as you can while traveling. Pick your fights until you are properly equipped and if you can get into position unnoticed and quickly dispatch a group they can't call for reinforcements. Of course there is a famous saying about plans and s*** will hit the fan sooner rather than later anyways ;) DantePrkl: Apart from island choice (see above) the modset you use can help with difficulty. Some factions have a less advanced pool of vehicles, so for example with the CUP versions against the SLA and RACS (on Sahrani) or the Takistani Army and Insurgents (on desert terrains like Takistan or Duala) you will see less or softer armor. Of course it's very much random which vehicle the mission chooses to spawn, so maybe you were just really unlucky. If you are a bit familiar with editing you can open the unitclasses.sqf file and either remove some APC/tank classes or just copy-paste and increase the number of softer vehicles like cars and trucks to stack the odds in your favour. Just look for the arrays "a3e_arr_Escape_MilitaryTraffic_EnemyVehicleClasses" and "a3e_arr_Escape_MilitaryTraffic_EnemyVehicleClasses_IND" near the top of the file. No idea if it's feasible to add a setting, Neo will have to think about that when he's back.

Time for another full release: Complete Pack 1.8.0 co10 Escape (Complete) 1.8.0 No full changelog here, but since the last official release a lot happened, most notably the Apex release. If you didn't follow the development versions you will find: - new islands (BIS Tanoa and Malden 2035, CUP CWR islands, Al Rayak) - new or improved mod versions (CUP, RHS, Massis AFR, IFA3 Lite) - a lot of bugfixes and hopefully not as many bugs ;) I want to thank everyone that helped us by reporting bugs, porting the mission to new islands, making mods versions, or just by giving feedback.

New build 121 is up at ftp://anzp.de/development/ with a new test version of IFA3 and IFA3+LEN versions (thanks to both Nils5940 and TheSurvivorOfZeds) Nils5940: There where some syntax errors, missing comma or one too many, missing ", that kind of stuff. Also some "Strumtruppen" ;) I didn't really try them, just some short SP tests, so please play them properly and we'll see how they work. I added both to Altis, Stratis, Malden 2035, Chernarus, and the 4 CUP CWR islands. But the extraction still uses a standard BIS chopper rudyreyes: Still sounds fishy, but hey...it's Arma! How many players are you? Has everyone got the problem, or is it only specific ones that see others sink/sink for others? For example 1 and 2 can revive each other, but 3 sinks for them and 3 cant see 1 and 2? Maybe it's the player units used, then it should happen on other islands, too. Have you checked RHS-US on other islands? We'll try it when we play next time.

Hey Nils. No problem, when you get it to work we can add it to the builder. Small problem with your files in the link: - mission.sqm is binarized, can't look at it just with Notepad - as it's binarized and you omitted the .island part in the filename I don't know which island to put it on - you didn't include the Units\unitclasses.sqf If you save the mission and uncheck the "binarize" option at the bottom you can then read it with a text editor It was enough to take a look though, it's the alliance part that's wrong in your mission.sqm. In the editor look under the menu Attributes -> General and change Indep to be friendly with West and enemy to East. It's the part I posted above with "resistanceEast" and west, if the mission.sqm is readable. The never ending "loading" is most probably a syntax error in the unitclasses.sqf, if you have a backup try the one before that again, might be easier than finding the missing comma.

Nils5940: But the parameter for Wartorn mode is off? Hard to say, even if you mixed classes in the unitclasses (e.g. east units in independent arrays or west or whatever) it should spawn them for the right side. Maybe disable wartorn mode in include/params.hpp for all settings to test, again, check the sides at the top of unitclasses as I posted above and double check your mission.sqm for class Mission { class Intel { resistanceWest=0; resistanceEast=1; That should mean Indep is friendly to east, but maybe I'm mixing it up, so better double check that too ;) rudyreyes:That sounds like a problem you get if the players use different versions of the island. Make sure everyone uses the same one. A problem that already existed in CWC https://www.youtube.com/watch?v=X34uRckQwPI :D

TheSurvivorOfZeds: Try again now, apparently the LEN units were bugged (which is why I had problems with them too), but there was a fix for them last friday. cyprus: That was close one. Well, not for you obviously, but you took one for the team like a great leader :D I can however ease your pain a little and tell you that Neo was killed in the escape chopper too, just yesterday while leaving Dingor ;) Nils5940: You can, there are a few "red vs. blue" versions for CUP and RHS. (Didn't we have a BIS one once, what happened to that...) To change an existing mission you need to: 1. change the player units side, obviously 2. change the unitclasses.sqf, pretty much at the top you'll find the sides A3E_VAR_Side_Blufor = east; A3E_VAR_Side_Opfor = west; A3E_VAR_Side_Ind = resistance; Blufor is always the player side, here it's already switched to east 3. change and double check the alliance of the independent side, so you don't get the "War-Torn Mode" activated

Sure: enum { DESTRUCTENGINE = 2, DESTRUCTDEFAULT = 6, DESTRUCTWRECK = 7, DESTRUCTTREE = 3, DESTRUCTTENT = 4, STABILIZEDINAXISX = 1, STABILIZEDINAXESXYZ = 4, STABILIZEDINAXISY = 2, STABILIZEDINAXESBOTH = 3, DESTRUCTNO = 0, STABILIZEDINAXESNONE = 0, DESTRUCTMAN = 5, DESTRUCTBUILDING = 1, }; class CfgPatches { authors[] = {"Project Genesis Team"}; author = "SWTX"; name="Rhino .357 Magnum"; requiredAddons[]={"A3_Weapons_F", "A3_Sounds_F"}; requiredVersion=0.1; units[]={}; ammo[]={"B_357_JHP"}; magazines[]={"6Rnd_357magnum_Cylinder"}; weapons[] = {"hgun_Pistol_heavy_02_357_F", "hgun_Pistol_heavy_02_357_Yorris_F"}; }; }; class CfgAmmo { class B_762x51_Ball; class B_357_JHP: B_762x51_Ball { hit=12; caliber=1.6 deflecting=15; audibleFire=50; cost=1.2; typicalSpeed=825; }; }; class CfgMagazines { class 6Rnd_45ACP_Cylinder; class 6Rnd_357magnum_Cylinder: 6Rnd_45ACP_Cylinder { ammo="B_357_JHP"; author="Project Genesis Team"; author = "SWTX"; picture="\A3\Weapons_F_EPA\Data\ui\M_6Rnd_revolver_CA.paa"; displayName=".357 Magnum 6Rnd Speed Loader"; descriptionShort=".357 Speed Loader"; initSpeed=825; count=6; mass=6; }; }; class Mode_SemiAuto; // External class reference class SlotInfo; // External class reference class CowsSlot; // External class reference class PointerSlot; // External class reference class CfgWeapons { class hgun_Pistol_heavy_02_F; class hgun_357_Magnum : hgun_Pistol_heavy_02_F { class WeaponSlotsInfo; }; class hgun_Pistol_heavy_02_357_F: hgun_357_Magnum { authors[] = {"Project Genesis Team"}; author = "SWTX"; _generalMacro = "hgun_Pistol_heavy_02_357_F"; baseWeapon = "hgun_Pistol_heavy_02_357_F"; scope = 2; model = "\A3\Weapons_F_EPA\Pistols\Pistol_heavy_02\Pistol_heavy_02_F.p3d"; picture = "\A3\Weapons_F_EPA\Pistols\Pistol_Heavy_02\data\UI\gear_Pistol_heavy_02_X_CA.paa"; magazines[]={"6Rnd_357magnum_Cylinder"}; displayname = "Rhino .357 Magnum"; descriptionShort = ".357 Magnum"; class Library { libTextDesc = "$STR_A3_CfgWeapons_hgun_Pistol_heavy_02_357_F_Library0"; }; reloadAction = "GestureReloadPistolHeavy02"; recoil = "recoil_pistol_zubr"; drySound[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\dry_Zubr", 0.398107, 1, 20}; reloadMagazineSound[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\reload_Zubr", 0.562341, 1, 10}; modes[] = {"Single"}; class Single : Mode_SemiAuto { sounds[] = {"StandardSound", "SilencedSound"}; class BaseSoundModeType { closure1[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\Closure_Zubr_01", 0.199526, 1, 10}; closure2[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\Closure_Zubr_02", 0.199526, 1, 10}; soundClosure[] = {"closure1", 0.5, "closure2", 0.5}; }; }; class StandardSound : BaseSoundModeType { begin1[] = {"\PG_Zubr\sounds\Zubr_short_01", 3.16228, 1, 1600}; begin2[] = {"\PG_Zubr\sounds\Zubr_short_02", 3.16228, 1, 1600}; begin3[] = {"\PG_Zubr\sounds\Zubr_short_03", 3.16228, 1, 1600}; soundBegin[] = {"begin1", 0.33, "begin2", 0.33, "begin3", 0.34}; class SoundTails { class TailInterior { sound[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\Zubr_tail_interior", 1.41254, 1, 1600}; frequency = 1; volume = "interior"; }; class TailTrees { sound[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\Zubr_tail_trees", 1.0, 1, 1600}; frequency = 1; volume = "(1-interior/1.4)*trees"; }; class TailForest { sound[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\Zubr_tail_forest", 1.0, 1, 1600}; frequency = 1; volume = "(1-interior/1.4)*forest"; }; class TailMeadows { sound[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\Zubr_tail_meadows", 1.0, 1, 1600}; frequency = 1; volume = "(1-interior/1.4)*(meadows/2 max sea/2)"; }; class TailHouses { sound[] = {"A3\Sounds_F\arsenal\weapons\Pistols\Zubr\Zubr_tail_houses", 1.0, 1, 1600}; frequency = 1; volume = "(1-interior/1.4)*houses"; }; }; class SilencedSound : BaseSoundModeType {}; recoil = "recoil_pistol_heavy"; recoilProne = "recoil_prone_pistol_heavy"; reloadTime = 0.25; dispersion = 0.00145; minRange = 5; minRangeProbab = 0.3; midRange = 25; midRangeProbab = 0.6; maxRange = 50; maxRangeProbab = 0.1; aiRateOfFire = 2; aiRateOfFireDistance = 25; }; bullet1[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet2[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet3[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet4[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet5[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet6[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet7[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet8[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet9[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet10[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet11[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; bullet12[] = {"A3\sounds_f\dummysound", 1.0, 1, 15}; soundBullet[] = {"bullet1", 0.083, "bullet2", 0.083, "bullet3", 0.083, "bullet4", 0.083, "bullet5", 0.083, "bullet6", 0.083, "bullet7", 0.083, "bullet8", 0.083, "bullet9", 0.083, "bullet10", 0.083, "bullet11", 0.083, "bullet12", 0.083}; inertia = 0.3; aimTransitionSpeed = 1.5; dexterity = 1.7; initSpeed = 480; maxZeroing = 100; class WeaponSlotsInfo : WeaponSlotsInfo { mass = 30; holsterScale = 0.85; class CowsSlot : CowsSlot { compatibleItems[] = {"optic_Yorris"}; iconPosition[] = {0.4, 0.3}; iconScale = 0.15; }; class MuzzleSlot {}; class PointerSlot : PointerSlot { linkProxy = "\A3\data_f\proxies\weapon_slots\SIDE"; compatibleItems[] = {"acc_flashlight_pistol"}; iconPosition[] = {0.35, 0.6}; iconScale = 0.3; }; }; }; class hgun_Pistol_heavy_02_357_F; // External class reference class hgun_Pistol_heavy_02_357_Yorris_F: hgun_Pistol_heavy_02_357_F { authors[] = {"Project Genesis Team"}; author = "SWTX"; _generalMacro = "hgun_Pistol_heavy_02_Yorris_F"; class LinkedItems { class LinkedItemsOptic { slot = "CowsSlot"; item = "optic_Yorris"; }; }; }; }; There was another }; missing to close class Single : Mode_SemiAuto { I recommend you use an editor that can show you the corresponding bracket and has plugins for SQF syntax, like Notepad++ or Visual Studio Code, that helps when searching for errors like this.

I seem to have trouble running people over in vehicles in multiplayer with this, but can't reproduce it in singleplayer. I use it only clientside, the server does not use it and nobody else yet. Mostly people don't die as easily and stand up after a good hit, sometimes the car is nearly stopped by the impact and if you are unlucky this happens: :D Will need to test further, the video was captured while still using v0.2, but I had trouble running people over with v0.3 today, too. Just no insane flips so far :D I'll try what happens if the server also uses the addon.