catito14 0 Posted July 3, 2007 Hello, i´m from Argentina and i bought the game from internet. My problem is the following one: The Armed Assault was working perfectly with the version 1.05, when i update the game to the version 1.08, the performance of the game is going under . I was quarrelling in different forums and in the majority of the players the version 1.08 improved the performance, but not to me, in my case the performance are poor in comparison ith the 1.05 version. I do not find which can be the problem and i want to know if you could solve it. My PC: -Pentium 4 3 ghz -1GB RAM -nVidia GeForce 7600 GT 256 mb - Windows XP regards Share this post Link to post Share on other sites
hedcrusha 0 Posted July 3, 2007 Defrag, get rid of any spyware or malware lurkin in the depths of your pc (try adaware), virus scan, close unwanted apps in the background that you dont need, turn gfx down, turn pagefile off, install latest drivers sound gfx ect, re-install arma, if worst comes to worst re-install xp. Share this post Link to post Share on other sites
Maddmatt 1 Posted July 3, 2007 (hedcrusha @ July 03 2007,20:23) said: ...turn pagefile off... Why would he want to do that? Best to set page file to 2Gig for that amount of RAM. Share this post Link to post Share on other sites
hedcrusha 0 Posted July 3, 2007 Because in this forum ive read somwhere that turning pagefile off increases performance for some ppl! Its worth a try. Share this post Link to post Share on other sites
super64 0 Posted July 3, 2007 Pesonally id never turn off my pagefile. Defraging after the patch did give me a noticeable boost in frame rate. Also, I notice you're using an Nvidia card. Try going into the Nvidia control panel and force Vsync to OFF under the profile for arma.exe. I got an immediate 15fps jump after doing so. And no... I do not have any tearing in the graphics. Share this post Link to post Share on other sites
catito14 0 Posted July 3, 2007 (|rsi|super64 @ July 03 2007 said: Pesonally id never turn off my pagefile. Â Defraging after the patch did give me a noticeable boost in frame rate. Â Also, I notice you're using an Nvidia card. Â Try going into the Nvidia control panel and force Vsync to OFF under the profile for arma.exe. Â I got an immediate 15fps jump after doing so. Â And no... I do not have any tearing in the graphics. I dont know where are Vsync, please tell how i can put it to off. thankss Share this post Link to post Share on other sites
gL33k 0 Posted July 3, 2007 (catito14 @ July 03 2007,20:17) said: Hello, i´m from Argentina and i bought the game from internet. My problem is the following one: The Armed Assault was working perfectly with the version 1.05, when i update the game to the version 1.08, the performance of the game is going under . I was quarrelling in different forums and in the majority of the players the version 1.08 improved the performance, but not to me, in my case the performance are poor in comparison ith the 1.05 version. I do not find which can be the problem and i want to know if you could solve it.My PC: -Pentium 4 3 ghz -1GB RAM -nVidia GeForce 7600 GT 256 mb - Windows XP regards 256MB Vram ? texture detail = normal "for not lose" Share this post Link to post Share on other sites
catito14 0 Posted July 4, 2007 (gL33k @ July 03 2007,22:54) said: (catito14 @ July 03 2007,20:17) said: Hello, i´m from Argentina and i bought the game from internet. My problem is the following one: The Armed Assault  was working perfectly with the version 1.05, when i update the game to the version 1.08, the performance of the game is going  under . I was quarrelling in different forums and in the majority of the players the version 1.08 improved the performance, but not to me, in my case the performance are poor in comparison ith the 1.05 version. I do not find which can be the problem and i want to know if you  could solve it.My PC: -Pentium 4 3 ghz -1GB RAM -nVidia GeForce 7600 GT 256 mb - Windows XP regards 256MB Vram ? texture detail = normal "for not lose" i dont understand Share this post Link to post Share on other sites
Mr_Tea 0 Posted July 4, 2007 In the video settings, advanced features, or whatever it`s called in you`re version, set the texture detail to normal. Share this post Link to post Share on other sites
catito14 0 Posted July 4, 2007 Ah ok, but i put to normal the first time i played, but ther performance still poor in comparison with the 1.05 version. I need put all in LOW and visibility in 1200 to play with 35 FPS in open field. Share this post Link to post Share on other sites
-Puma- 2 Posted July 4, 2007 don't turn off pagefile with 1gb of ram, I've tried it and dosent work, only do it with 2gb. BTW I posted this tweak on forums, and it has done wonders to others including me catito14: turn off AA and AF , shadows off aswell. put post processing to low. try the latest 94 drivers. Share this post Link to post Share on other sites
maddogx 13 Posted July 4, 2007 (catito14 @ July 04 2007,04:34) said: Ah ok, but i put to normal the first time i played, but ther performance still poor in comparison with the 1.05 version. I need put all in LOW and visibility in 1200 to play with 35 FPS in open field. Looking at your hardware, I think those settings are about right. You should try setting shading details to very low, that will help your framerate a lot. Perhaps then you can set object, texture and/or terrain details to normal. Like Puma said, turn off Antialiasing and Anisotrophic filtering and perhaps also shadows. Share this post Link to post Share on other sites
catito14 0 Posted July 4, 2007 Ok, but that´s not my problem.....i can play the game normally with that settings, but my question(...and problem ) is about the low performance of the 1.08 version in comparison wit the 1.05 version in my ArmA. That low performance is not normal, right? ´Cause the 1.05 version works great, all in normal settings. cheers Share this post Link to post Share on other sites
-Puma- 2 Posted July 5, 2007 well some1 can have a great perf. boost after patching and other 1's performance goes down, It depends of the hardware, drivers(do u have the latest forceware??) etc. not much to do really, but to tweak the settings some more Share this post Link to post Share on other sites
Maddmatt 1 Posted July 5, 2007 Try these drivers: 162.15 WinXP. When I was using older drivers the 1.08 patch caused serious issues with ArmA, updating to newer drivers from Guru3D.com gave me a big improvement. Share this post Link to post Share on other sites
=jps=sgtrock 4 Posted July 6, 2007 I see advice like this time and again, and I can't believe that anyone thinks this is a good idea. DO NOT, I repeat, DO NOT install any drivers from anywhere for any peripheral from any vendor from any place other than a site directly linked from the vendor's site. Anything else is just asking for trouble. Share this post Link to post Share on other sites
Maddmatt 1 Posted July 6, 2007 (=JpS=SgtRock @ July 06 2007,06:19) said: I see advice like this time and again, and I can't believe that anyone thinks this is a good idea. DO NOT, I repeat, DO NOT install any drivers from anywhere for any peripheral from any vendor from any place other than a site directly linked from the vendor's site. Anything else is just asking for trouble. That is absolute garbage. These drivers work better for me than what I get from the Nvidia site. If they cause problems, then it is easy to install the older drivers again. If they caused serious problems, then they would be taken off the Guru3D site or had a warning there. You obviously don't know that website. You can go into their forums and see comments about the drivers before you try them. Share this post Link to post Share on other sites
Tankbuster 1747 Posted July 6, 2007 (Maddmatt @ July 06 2007,10:10) said: (=JpS=SgtRock @ July 06 2007,06:19) said: and I can't believe that anyone thinks this is a good idea. That is absolute garbage. These drivers work better for me than what I get from the Nvidia site. Those drivers work fine for me too. Guru3d is a reputable site and the 162 drivers have worked really well for me. Share this post Link to post Share on other sites
Maddmatt 1 Posted July 6, 2007 162.18 for WinXP32bit have just been released, you can get them here. I haven't tested them yet, but I expect them to be pretty much the same as 162.15 for ArmA. Share this post Link to post Share on other sites
SWAT_BigBear 0 Posted July 6, 2007 I also will use/test guru of 3D drivers...no worries of them "causing troubles". When 1.08 came out...I did have to revert back to the WHQL 158.24... but the beta'S from guru3d always give better performance in other apps/games. I to will test/use these new ones in the next few days (can't for now due to an Evo game I've been in all this week) Share this post Link to post Share on other sites
Maddmatt 1 Posted July 6, 2007 I did test the 162.18 a bit. They seem to work well so far Share this post Link to post Share on other sites
vilas 477 Posted July 6, 2007 [b said: Quote[/b] ]but ther performance still poor in comparison with the 1.05 version oh my god ? 1.05 was unplayble for me and many other people 1.08 is best patch, because now game runs fine patch 1.05 made game totaly unplayble for more than 15-20 minutes ! after some minutes i had no textures in 1.05 i am surpised that there are people with problems after 1.08 bigger than before 1.05 1.05 was one big mistake as 1.07 was CTD generator :/ is this game is insane ? for many people 1.08 was patch that we waited for since december 2006 when we bought game i don't know any other such randomPC-trouble software ? Share this post Link to post Share on other sites
SlurrpyChillyFries 0 Posted July 6, 2007 (Maddmatt @ July 03 2007,15:26) said: (hedcrusha @ July 03 2007,20:23) said: ...turn pagefile off... Why would he want to do that? Best to set page file to 2Gig for that amount of RAM. because windows is piss poor at managing swap. if the page file is activated your program will use swap and there is nothing you can do about it. unlike linux that wont use swap until you run out of memory. if you have 2 gigs plus, i recommend enabling the "DisablePaginExecutive" and enable "LargeSystemCache". the first option prevents the kernel and driver code from being paged to disk, the second one allows windows to utilize more memory to hold shared files like dlls, or commonly read files. if on xp all you really need to do is disable the pagefile, the above is for windows 2000. Share this post Link to post Share on other sites
DBO_ 0 Posted July 6, 2007 [b said: Quote[/b] ]Ok, but that´s not my problem.....i can play the game normally with that settings, but my question(...and problem ) is about the low performance of the 1.08 version in comparison wit the 1.05 version in my ArmA. That low performance is not normal, right? ´Cause the 1.05 version works great, all in normal settings. I had same problem and just to add another possible setting that works and it may seem silly but for me it wasnt. turn all things on high or vhigh except view distance 1200-2000 aa disabled af disabled post processing low seems strange but looks like 1.08 has turned most values on there head. may work for you hope so ,if not file it Share this post Link to post Share on other sites
=jps=sgtrock 4 Posted July 7, 2007 (TankbusterSPAFF @ July 06 2007,11:13) said: (Maddmatt @ July 06 2007,10:10) said: (=JpS=SgtRock @ July 06 2007,06:19) said: and I can't believe that anyone thinks this is a good idea. That is absolute garbage. These drivers work better for me than what I get from the Nvidia site. Those drivers work fine for me too. Guru3d is a reputable site and the 162 drivers have worked really well for me. Reputable how? Is this an Nvidia approved site for testing betas? If it is, then I'm OK with using drivers located there. If not, then using their drivers is just not a good idea from a security standpoint. Share this post Link to post Share on other sites