honchoblack 2 Posted May 24, 2005 I dont actually have any/all of the finished models so you'd be wasting your time, unless you want the config I cant say when it'll be finished, its out of my hands right now. I can of course sell you vital information like Rabbits address, passwords and his local chippy where he seems to spend most of his life since you have the config could you tell me what has changed since the alpha of the GMER 1.2 that you send me a while ago and yes, once we dont hear from whereismyrabbit? for more than a week it would be usefull to know his local chippy, to send a motivational-squad Share this post Link to post Share on other sites
Munk 0 Posted May 24, 2005 Right... Added: 5 Rebel models (total 14) 6+ Civie modles (im sure theres more but Ive only got 6 down in the config) 4+ Bonus models (A few things rabbits done) Models fixed up a bit more Old 'groups' reworked and new groups added Weapon loadouts edited General config shite Stuff to do (as far as I know): Redo selections on certain models Send to Munk Updated config Clean out unneeded crap (unused textures etc.) Compress to .pbo Update readme password .rar it all up send to beta testers fix bugs update readme again repeat a few times .rar it up, upload it and finally release the fooker Still alot left to do but its all easy stuff (except the selections). Rabbits pretty much redone all my half assed crappy work which is a good thing  Share this post Link to post Share on other sites
honchoblack 2 Posted May 24, 2005 GOOD NEWS! specially since you added new units, will add even more variety once i add them to the missions, glad to hear too that the remaining work is not that hard/much anymore, i am eagerly awaiting the first test run i hope the rebel leader still carries the S&W as a sidearm, just love it once he uses it, dont know how often i fell for that weapon in the test runs, that sneaky B...... always seems to be waiting for me (almost feels like "WestWorld" ) Share this post Link to post Share on other sites
chaztheducky 0 Posted May 24, 2005 Quote[/b] ]4+ Bonus models (A few things rabbits done) cool, could yall elaborate?Quote[/b] ]send to beta testers i think i know someone who can help you at there..... Quote[/b] ]fix bugs good  Quote[/b] ]repeat a few times bad  but in a good way Quote[/b] ]release the fooker my favorite part from honcho Quote[/b] ]and yes, once we dont hear from whereismyrabbit? for more than a week it would be usefull to know his local chippy, to send a motivational-squad i like the way you think Share this post Link to post Share on other sites
Munk 0 Posted May 24, 2005 Quote[/b] ]4+ Bonus models (A few things rabbits done) cool, could yall elaborate? That would spoil the horrible, horrible surprise. Just waiting for Carl to come and point out all the stuff he's got left to do that Ive forgotten about, Ive been demoted to config boy Share this post Link to post Share on other sites
deathsai 0 Posted May 25, 2005 Does anyone know why my missions are down to only having 1 enemy group? Any type of mission, there's only 6 rebels and 1 tank. Share this post Link to post Share on other sites
wheres my rabbit ? 10 Posted May 25, 2005 right i've pretty much got them working ok apart from 1 or 2 errors(for want of a better word)when they are in certain stances. i will send munk a model later today so he can see first hand wot needs to be done and maybe he will have an idea of how to fix these aswell cos ive redone/remodelled bits so many times i cant see the wood for the trees and its doing my head in cos i'm learning o2 as i go , if i had my way i'd be starting the whole thing again in 3ds max Quote[/b] ]Does anyone know why my missions are down to only having 1 enemy group? Any type of mission, there's only 6 rebels and 1 tank. err your doing well and support for the terrorists is low ? Share this post Link to post Share on other sites
Metal Heart 0 Posted May 25, 2005 [your addons are all there, should be able to see the unarmed civilians] I downloaded Dynamic Afghanistan 1.1 and in that mission the civilians work correctly, in 1.2b they don't. In addition to required addons I only run Kegetys' editorupdate and hi-res sky and OFP is version 1.96 GOTY. I tried re-downloading the rebels and v1.2b but it didn't solve the problem. Share this post Link to post Share on other sites
honchoblack 2 Posted May 25, 2005 deathsai - this is very interesting, may i ask if this happens later in the mission, because i suspect that once a OPFOR gets shot that he is taken out of the array of his (terrorist) group, thus cant be deleted once the whole group is deleted, can you confirm that body where left lying on the battlefield after a rest at base? if this should be the problem i would have to spawn any enemy with his proper name, and at "cleanup" i would have to delete units by name rather then whole groups wheres my rabbit ? - Quote[/b] ]i will send munk a model later today so he can see first hand wot needs to be done and maybe he will have an idea of how to fix these aswell cos ive redone/remodelled bits so many times i cant see the wood for the trees and its doing my head in cos i'm learning o2 as i go , if i had my way i'd be starting the whole thing again in 3ds max i just know what you mean, doing the same thing over and over again leads to the same dead ends for me (often to the worse than to the good ), most of the time i let my works rest then or try to get other opinions, about starting the whole thing over again in 3ds max would be very nice and greatly appreciated, but it would be more than nice to release this version first, and think about a complete rework once this is done (pretty please with cherry ontop) Metal Heart - your problem seems very strange indeed, specially since it hasnt been reported before, and i couldnt reconstruct the problem with the 1.2b version i have here, i looked at the spawning scripts and everything is as supposed, i will look at the mission again and try to figure out what could be the reason for your "hiding" civilians Share this post Link to post Share on other sites
deathsai 0 Posted May 25, 2005 deathsai -this is very interesting, may i ask if this happens later in the mission, because i suspect that once a OPFOR gets shot that he is taken out of the array of his (terrorist) group, thus cant be deleted once the whole group is deleted, can you confirm that body where left lying on the battlefield after a rest at base? if this should be the problem i would have to spawn any enemy with his proper name, and at "cleanup" i would have to delete units by name rather then whole groups It's only after around 6 missions. Support for the terrorists is moderate. And I've done missions in the same place a few times after this was happening, and before, and there are no bodies from older missions left behind after resting. Share this post Link to post Share on other sites
sanctuary 19 Posted May 26, 2005 By any chances, have you used a 4X acceleration time ? We noticed in some early works that if the player is using a 4x acceleration time it can quickly break some scripts, and prevent some spawning or just make the insertion chopper to be stuck and refusing to follow its waypoints. That is very annoying even for us (as we don't really appreciate to see that the hours we spent in optimisation can be wasted by something so simple as the time acceleration), but we have tried to work to find some solution to keep the scripts running despite all the attempts of the user to break them So i think the problem you have now should not exist in the upcoming update of Honchoblack Dynamic Afghan . It can happen too when you save the game without using the Save option in the base, as if you use the OFP built in Save feature, if you do in in the middle of a script, you break it unfortunately. The Save feature in the base is supposed to not happen when a script is running, lowering a very lot the chance to break a script. Share this post Link to post Share on other sites
deathsai 0 Posted May 26, 2005 Yes, I've done both of those. Time to start over... Share this post Link to post Share on other sites
squelch 0 Posted June 11, 2005 Hi, This sounds and looks fantastic. I'd like to report a couple of bugs that you may no be aware of and make a couple of minor suggestions. Bug 1: I accidently chose INSERTION as my transport means, but then decided to use armor instead. Everything was fine until I clicked the map to set a waypoint for my convoy. The insertion chopper took off and my guys started to drive. But, when the chopper reached the drop zone everyone got ejected from fast moving vehicles, killing or injuring them. Suggested fix 1: Check to see if player is onboard the chopper before running the INSERTION script. ie Player must board chopper then choose destination. This would dispense with the loading black out and prevent the script running otherwise. Bug 2: Another ground vehicle error. I returned from a succesful mission having used some armor and a repair truck. As I'd got ahead of the rest of my team I went and reported while they were still on route. The team were rearmed etc and everythng looked fine. A little later I noticed some of the vehicles still had men on board and these were in a zombie state. This makes the vehicles unavailble for future missions. Suggested fix 2: Issue a get out command for the team before rearming/replacing. I don't think this will cause a problem if they are not in a vehicle. Bug 3: PARA DROP injuries and deaths. Too many men die or get injured when they crash into each other on exiting the chopper. Suggested fix 3: Put a ~1 or something into the eject script to spread them out. This would work for insertion too where a pile of men results. Bug 4: Onmapsingleclick hangovers. I noticed after I'd forgotten to set a waypoint for CAS in one mission, it then happened on the next mission after I set a waypoint for my men. Suggested 4: Delete the onmapsingleclick at the end of a mission. Apart from these minor issues I've enjoyed playing these missions a great deal and look forward to the 1.3 version very much. Any news on the Rebel pack? Share this post Link to post Share on other sites
honchoblack 2 Posted June 12, 2005 Hi Squelch thank you for your feedback the GMER 1.2 are still in the works, it will take a little longer than expected though, so i am thinking of reverting back to the GMER 1.1 till the updated comes out i had the update done for quite a while, and most of the issues you addressed are dealt with, but i still kept working the mission trying new things, and i dont know if i did some stuff to the worse rather to the good, that is why i am thinking of reverting back to the older version of the GMER to get some feedback on the new stuff and on the changes i made concerning the things you discovered: 1) yes i should check is player team is onboard, else skip the kick out of the helicopter, since the player team will be kicked out of any vehicle they are driving 2) the suggested fix could lead to the same you described above, if the team is en route and driving they will get harmed, but i can change it that the team only gets rearmed once its within the base parameters, in the next version you can rearm infield, i will need feedback if that causes trouble 3) paradrop is been reworked, i use a slightly slower jump sequence ~0.7, but with the helicopter gaining in height 4) good idea, never thought of the open loop if the player doesnt click the map at all after choosing a radio code function thank you for the feedback once more, i hope i can release the next update soon, some more things are changed and new stuff added Share this post Link to post Share on other sites
chaztheducky 0 Posted June 12, 2005 you know if this would have been like 2 or 3 weeks ago i think i would of said to wait for gmer 1.2......but sence its been like FREAKIN FOREVER! i hate to say it but you should release like version 1.3 with gmer 1.1 as a beta like dynamic afganistan v. 1.2.5 or so. but my view doesent realy count for anything so you do what you want hanchoblack. later Share this post Link to post Share on other sites
Munk 0 Posted June 12, 2005 Rabbits fixed all he can, just needs to apply it to the rest of the models. We'll shorted the beta testing period to a 2-4 days and if nothings found it'll get released Ive got OFPCentral back up so hosting isnt a problem anymore either. If bugs are found, revert to 1.1 and do the 1.25 beta... Share this post Link to post Share on other sites
honchoblack 2 Posted June 12, 2005 thank you for the update Munk i prefer the version like it is know with the new civilians, i cant get myself to delete them out of the mission, so i will wait for the release of the GMER 1.2 (which seems closer then ever ) Share this post Link to post Share on other sites
wolfh2o 0 Posted June 13, 2005 I'm still holding my breath for the new version. Good work guys Share this post Link to post Share on other sites
Munk 0 Posted June 13, 2005 Now BBs dessie grunts look like they're almost done, how about a UK conversion? Share this post Link to post Share on other sites
honchoblack 2 Posted June 13, 2005 future conversion plans include the BB BLEED pack in combination with these vehicles http://ofp.gamezone.cz/index.php?showthis=8060 http://ofp.gamezone.cz/index.php?showthis=6554 and some more selected british stuff for the air insertion other conversion plans include the ExtracTioN CIA units in the works Share this post Link to post Share on other sites
wheres my rabbit ? 10 Posted June 13, 2005 future conversion plans include the BB BLEED pack in combination with these vehicleshttp://ofp.gamezone.cz/index.php?showthis=8060 http://ofp.gamezone.cz/index.php?showthis=6554 and some more selected british stuff for the air insertion other conversion plans include the ExtracTioN CIA units in the works raaah that will be great dont forget the lynx http://ofp.gamezone.cz/index.php?showthis=7528 Share this post Link to post Share on other sites
Guest Ti0n3r Posted June 13, 2005 raaah that will be great dont forget the lynxhttp://ofp.gamezone.cz/index.php?showthis=7528 Now thats one sexy chopper! Share this post Link to post Share on other sites
1in1class 0 Posted June 14, 2005 iv been playing this mission and i cant find the enamy flew all over the place where are they or did i do something here havent shot any thing yet Share this post Link to post Share on other sites
thorgal 0 Posted June 14, 2005 hihi I think You should ask your CO for the assign first then fly over the island T. Share this post Link to post Share on other sites
1in1class 0 Posted June 14, 2005 lol ya i ? thats what the readme is for lol iv got it now thx lol. man this is some good stuff keep up the missons like this wow this is awsome u guys are on to something here love this cant wait till u guys make some more missons like this wow there is so much u can make LSR,UKF missons maps tonal island dak sung and on and on some much u guys can do with missions like this keep it up Share this post Link to post Share on other sites