Harzach 2516 Posted March 21, 2014 Finally getting around to checking out A3MP so I can see my favorite terrains in A3. Outstanding work, Alduric! By now, you have probably been asked about every terrain out there, but I'd love it if Faysh Khabur could get the A3MP-AP treatment. Share this post Link to post Share on other sites
nivimar 10 Posted March 22, 2014 How do you contact PWS and let them know it's not working? Share this post Link to post Share on other sites
Harzach 2516 Posted March 22, 2014 How do you contact PWS and let them know it's not working? What's not working? I just DL'd A3MP and A3MP-AP through PWS a couple of hours ago, and everything is working fine. Share this post Link to post Share on other sites
nivimar 10 Posted March 22, 2014 where I can't find where you fixed it from PWS sorry Share this post Link to post Share on other sites
Harzach 2516 Posted March 22, 2014 No one can help you if you don't describe the issue you are having. Try the PWS support line: https://getsatisfaction.com/withsix Share this post Link to post Share on other sites
grillob3 11 Posted March 28, 2014 Alduric Will you support these maps Reshmaan Province and Aliabad? Share this post Link to post Share on other sites
nickobus 16 Posted March 28, 2014 Figured I'd post here as I'm not sure if this would be the correct place to (didn't get any response on FATA threat). I'm having this recent issue upon starting the map (for Arma 3, the AIA compatible version but using A3MP). It was working fine until today (for unknown reason) with the error being "Cannot Open Object praa/praa_roads/roads/praa_dirt2_02000.p3d" and followed by "Cannot Open Object praa/praa_vegetation/praa_yuca.p3d". I've tried looking this up online to no avail. With these two issues, the thing I notice immediately is that the base bottom left corner of the map is missing the HESCO walls, not sure if there are other things missing as I cannot recall. Thanks in advance for any assistance. Share this post Link to post Share on other sites
BadHabitz 235 Posted April 8, 2014 Received a few errors in a server error report... Conflicting addon AiA_Worlds_DisableInfiniteTerrain in 'A3MP_Utils17\', previous definition in 'AiA_Worlds\disableinfiniteterrain\'Conflicting addon AiA_Worlds_Lighting in 'A3MP_Utils18\lighting\', previous definition in 'AiA_Worlds\lighting\' Conflicting addon AiA_Worlds_ClutterDist in 'A3MP_Utils18\clutterdist\', previous definition in 'AiA_Worlds\clutterdist\' Conflicting addon AiA_Worlds_NoDetailDist in 'A3MP_Utils18\nodetaildist\', previous definition in 'AiA_Worlds\nodetaildist\' Conflicting addon AiA_Worlds_FullDetailDist in 'A3MP_Utils18\fulldetaildist\', previous definition in 'AiA_Worlds\fulldetaildist\' Conflicting addon AiA_Worlds_SkyTexture in 'A3MP_Utils18\skytexture\', previous definition in 'AiA_Worlds\skytexture\' Conflicting addon CAData in 'a3\', previous definition in 'ca\' Warning Message: Addon 'fata_fix' requires addon 'praa_sound' I love all of the work you do Alduric! :dancehead: Share this post Link to post Share on other sites
KingoftheSandbox 10 Posted April 8, 2014 Can someone confirm that environment sounds on FATA are mission 60% of the area even with the fixed version? Share this post Link to post Share on other sites
Vasilyevich 20 Posted April 10, 2014 is there a "map only" download for namalsk or what are the .pbo's i can delete ? Share this post Link to post Share on other sites
gavc 28 Posted April 10, 2014 getting roughly the same as BadHabitz above... Not using AiA so a little confused:( G Item STR_f_JIP_reinforcementOptionsAction listed twice Unsupported language English in stringtable Unsupported language English in stringtable Conflicting addon AiA_Worlds_DisableInfiniteTerrain in 'A3MP_Utils17\', previous definition in 'AiA_Worlds\disableinfiniteterrain\' Conflicting addon AiA_Worlds_Lighting in 'A3MP_Utils18\lighting\', previous definition in 'AiA_Worlds\lighting\' Conflicting addon AiA_Worlds_ClutterDist in 'A3MP_Utils18\clutterdist\', previous definition in 'AiA_Worlds\clutterdist\' Conflicting addon AiA_Worlds_NoDetailDist in 'A3MP_Utils18\nodetaildist\', previous definition in 'AiA_Worlds\nodetaildist\' Conflicting addon AiA_Worlds_FullDetailDist in 'A3MP_Utils18\fulldetaildist\', previous definition in 'AiA_Worlds\fulldetaildist\' Conflicting addon AiA_Worlds_SkyTexture in 'A3MP_Utils18\skytexture\', previous definition in 'AiA_Worlds\skytexture\' Conflicting addon CAData in 'a3\', previous definition in 'ca\' Conflicting addon A3_Weapons_F_Acc in 'a3\weapons_f\acc\', previous definition in 'kio_susat\' Warning Message: Addon 'ns_fraction' requires addon 'CAWeapons2' Not using Share this post Link to post Share on other sites
alduric 10 Posted April 10, 2014 @UP Ignore. Know issue, not making any problem. Share this post Link to post Share on other sites
gavc 28 Posted April 14, 2014 Sorry to bump but can someone comment on the above problem I'm having? Normal map pack works but get this error with the AP.. Thanks gav. Sent from my HTC One using Tapatalk Share this post Link to post Share on other sites
ck-claw 1 Posted April 16, 2014 @GavC - Alduric answered you ;) Share this post Link to post Share on other sites
gavc 28 Posted April 17, 2014 That was at me? Right so. Don't understand what he's saying in that case. Sent from my HTC One using Tapatalk Share this post Link to post Share on other sites
nullrick 10 Posted April 17, 2014 (edited) Does anyone know when these maps will be released for A3 on PWS? Last time I tried manually installing them, it just drove me to rage quit. I can't figure out how to install them manually to save my life despite the instructions(?) on the armaholic pages for each respective map. I also heard from someone that once I did manually install it (if I had done so) that PWS would recognize it and I'd be able to turn it off and on like anything else installed with PWS. Is this correct? And does PWS recognize all other manually installed mops as well? Also allowing them to be switched on and off as if they, too, were installed via PWS to begin with? Edited April 17, 2014 by Nullrick Share this post Link to post Share on other sites
Belbo 462 Posted April 17, 2014 Does anyone know when these maps will be released for A3 on PWS? Last time I tried manually installing them, it just drove me to rage quit. I can't figure out how to install them manually to save my life despite the instructions(?) on the armaholic page. I also heard from someone that once I did manually install it (if I had done so) that PWS would recognize it and I'd be able to turn it off and on like anything else installed with PWS. Is this correct? A3MP is available on PWS (if you mean Play WithSix with that, which I assume). PWS is great to manage your AddOns, albeit it may seem to be a little bit clunky first (which it totally isn't). I really don't know why people a) use other programms for that or even b) manually load and manage their mods. Plus the guys from WithSix do a very great job with their support. Share this post Link to post Share on other sites
nullrick 10 Posted April 17, 2014 Oh I know A3MP as well as AP is available on PWS. I have them downloaded now. I'm talking about the maps that AP is used for. -Clafghan - Fallujah - F.A.T.A. - Federally Administred Tribal Areas, Pakistán - Nightstalkers: Shadow of Namalsk - Namalsk Crisis (only need Namalsk) - FDF Podagorsk - Thirsk Island Will these maps ever be released on PWS for A3? I know they're on PWS for A2 at the moment. Just not for A3 by the looks of it. And yes, PWS is a fream once you've gotten the hang of it. Which is fairly easy to do. Share this post Link to post Share on other sites
Belbo 462 Posted April 17, 2014 (edited) Oh I know A3MP as well as AP is available on PWS. I have them downloaded now. I'm talking about the maps that AP is used for. Ah, got'ya! Currently you've got to do it manually unfortunately, but that isn't actually that much trouble: 1. Go to http://www.armaholic.com/page.php?id=12315&highlight=FALLUJAH for the Fallujah-map for example. 2. Download the zip-file to a location of your choice (or simply open it by downloading it just temporarily). 3. Put the @fallujah1_2-folder into your arma 3-folder (wherever you've got your steam-folder and then steam\steamapps\common\arma 3\) 4. Start PWS and click on "Game Folder" under "Local". There you should see the fallujah-addOn (without PWS showing it's size, which is normal for manually installed and unregistered addOns). 5. Create a Collection with some sort of title like "A3MP-AP-Superdupercollection". 6.1 Drag and drop the fallujah-AddOn from "Game Folder" under "Local" over to your "A3MP-AP-Superdupercollection". 6.2 You should do the same with A3MP and A3MP-AP. 7. Select the "A3MP-AP-Superdupercollection" by double-clicking on it. 8. Hit "Launch". The same is true of course for all the other maps. With Namalsk you have to remove some files before you can actually launch it, but someone already posted it some pages ago... Edited April 17, 2014 by Pergor Share this post Link to post Share on other sites
nullrick 10 Posted April 17, 2014 Thank you so very much! That headache is now gone! Share this post Link to post Share on other sites
Belbo 462 Posted April 17, 2014 (edited) Thank you so very much! That headache is now gone! You're welcome! :) Here's the link to the post with the files for Namalsk: http://forums.bistudio.com/showthread.php?170241-A3MP-ArmA-3-Map-Pack&p=2664478&viewfull=1#post2664478 Edited April 17, 2014 by Pergor Share this post Link to post Share on other sites
ck-claw 1 Posted April 17, 2014 Thank you so very much! That headache is now gone! If you create a collection in PwS using A3MP- PwS with then make availible all the Arma2 islands to add :) Share this post Link to post Share on other sites
nullrick 10 Posted April 17, 2014 Alright. EVERY map works perfectly besides A3 crashing when I exit out of some of the A3MP-AP maps in the editor. Except for FDF_Podagorsk, which I can't seem to even extract for some reason. I can open it up in 7-zip, but it's not in a folder or anything. I expected to see another "@MapName" folder but didn't see the contents in such a folder. I tried creating a folder like that as the destination to extract the contents to, but that didn't work either. Personally, this is the map I've wanted to try above all the rest for a while now. Any help on this is very much appreciated even more so. But again, thanks for all the help so far. Share this post Link to post Share on other sites
SerialMum 10 Posted April 21, 2014 Hi, a big thanx for your fantastic work. A few wished a fix for Aliabad. I just want to join :) cu SerialMum Share this post Link to post Share on other sites
GieNkoV 30 Posted May 5, 2014 It would be nice to see fixed NAPF map. Have this problem with it (on bad weather): https://www.youtube.com/watch?v=pxXhJ59Du4s&feature=youtu.be Share this post Link to post Share on other sites
