LSD_Timewarp82 21 Posted February 24, 2015 Hi Eric, i noticed that the jointmuzzles are not available anymore for the Weapons. A couple of weeks ago i was able to mount your Surefire Suppressors on Vanilla Wepons, now they dont show up for those. Did i miss something or a config, or was there any kind of Updates for Arma 3? I run the actual Stable Branch 1.38. Hope you know what i mean, English is not my native Language ^^ Share this post Link to post Share on other sites
EricJ 759 Posted February 24, 2015 That's because Joint Muzzles was setup to also work for the vanilla weapons as well. If you look at the top of the page the vote was taken (if it's not visible?) and it was 12 in favor of not using Joint Muzzles. Overall I had no issue with Joint Muzzles but I felt it was kind of nice to get community input rather than just making a decision and that be it. Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted February 24, 2015 Ah now i see, thanks i understand. I didnt noticed that poll, like mentioned, it´s not my native Language and my eyes sometimes didnt notice sentences displaying on the screen. As you know i use your Wepons since first release of it, was always in my Modlist when i play, i personally loved the muzzels, they had given variety to a soldier setup in my opinion :) If you have this muzzels on your drive somewhere then feel free to send me a PM when its okay for you. I would love to have them back when playing SaOk´s WholeLottaAltis. Thx for your mod anyway, i love your Weapons :) Share this post Link to post Share on other sites
kubo4747 12 Posted February 24, 2015 Hi, this mod replacement standart BLUFOR weapons for SCAR? Thx. Share this post Link to post Share on other sites
EricJ 759 Posted February 25, 2015 Unfortunately it's not going to happen as the mod has about 66 weapons as it is, and the reason I cut this mod down was to help my sanity more than anything else so no, I'm not doing a separate version for Joint Muzzles. ---------- Post added at 20:18 ---------- Previous post was at 18:47 ---------- Hi, this mod replacement standart BLUFOR weapons for SCAR? Thx. Getting old... No, it's not a replacement pack for standard units. Honestly I just don't care to make one and realistically the SCAR would never be issued to line troops, and as far as I still understand US SOF doesn't really use it that much as FN hoped. Share this post Link to post Share on other sites
warlord554 2065 Posted February 25, 2015 So instead FN outbid remington and colt and currently hold the US M4 contract Share this post Link to post Share on other sites
EricJ 759 Posted February 25, 2015 That I wasn't strangely aware of... Good to know. ---------- Post added at 22:50 ---------- Previous post was at 21:35 ---------- Speaking of Warlord554 he's hooked me up with some good accessories, some suppressors and an AN/PVS-22. Since the AN/PVS-22 is an attachment that makes a scope NVG capable right now I plan to just add it to the M3LR optic as that's a 2D optic. I may possibly add it to some of the 2D ACOGs but overall I usually just use reg'lar NVGs and see fine with them. So when I get to a point I can get that working I will, so the M3LR will simply turn into a Day Only scope while the PVS-22 will be Night only. Share this post Link to post Share on other sites
EricJ 759 Posted February 25, 2015 Right now since I'm on "pause" (sort of) with client-work, I did manage to apply RVMATs to the suppressors, though methinks the "non-CLP" look doesn't work too well, after some help again from WarLord554 as far as that's concerned. Given that BIS overshines shit I'll see what I can do to give it a more muted shine. And as far as people using it with the RVMATs... looks good? Works okay? Share this post Link to post Share on other sites
warlord554 2065 Posted February 25, 2015 Dont think i mentioned it but check the fresnel values at the bottom of rvmat. Might need adjusting as it will change your specular look (particulary shine and reflection) Fresnel values for various materials and more indepth explanation here https://community.bistudio.com/wiki/Super_shader Share this post Link to post Share on other sites
EricJ 759 Posted February 26, 2015 Okay cool I'll have to look at that. I've seen that of course in the RVMAT file but never knew what it did so I just used the textures, thanks! Share this post Link to post Share on other sites
EricJ 759 Posted February 27, 2015 Was doing some checking of the gun work I was doing for somebody, and found this out with the HK416, should be okay as far as shine as well: Share this post Link to post Share on other sites
EricJ 759 Posted March 3, 2015 Okay got the latest patch installed. For right now the coding allows the InitSpeed to still be set by the magazine. For the most part since it still functions "as normal" I will not set a default initspeed on a weapon, yet. If for some reason the default BIS ammo doesn't work in the 5.56 guns at least, then I'll have to set it. More to follow on that as I spend some time to get it working so if you have to battlefield resupply then you won't be left with a non-functioning weapon. ---------- Post added at 17:46 ---------- Previous post was at 17:12 ---------- Okay a quick range test and vanilla ammo still fires correctly and still does killin, so right now since most weapons take a variety of ammunition at present, then I'm not going to fix what ain't broke. And methinks the recoil should be jecked up (not working) due to a new recoil system that they were working on (I left dev branch simply because I got all the information I needed). Also with the new resting algorithms going on TMR will still be considered part of the mod, but for nominal resting (rocks, etc.) you don't need it. And when the Marksman DLC comes out I'll move towards that as well and probably eliminate TMR as I go. Share this post Link to post Share on other sites
wansec_6 200 Posted March 3, 2015 Good to see you back. Was starting to think you had gone AWOL. Sounds like a successful R&D phasefor you. Share this post Link to post Share on other sites
EricJ 759 Posted March 3, 2015 Yeah I've had a rather rocky week so far and now its pretty much settled down so I can get back into working on the pack, a little bit so that's good but an update is still further away though, I think maybe in a week or two I can get another version updated. I still have a lot of custom gun work to do so that's what's kept me from working on this. I may include a Barret REC7 though, and quite frankly not do the M468 since the work is already done (other than inventory images and other small bits) but it is a 6.8 weapon so... that's what's been on my mind so far as far as an additional weapon as I think a lot of people want a 6.8 SPC weapon anyway. Recoil seems to be unaffected so maybe back then when I was on Dev they may haven't gotten a good feel for it even though I thought it was pretty cool. Share this post Link to post Share on other sites
Kids 1 Posted March 4, 2015 I love this mod, it adds so many unique and current weapons to the game. however I have noticed an issue with the HK416 GL sight or its zeroing. Recently the arma 3 1.4 update went up so it might be some of the changes in 1.4 that screwed it up, but when using the GL it seems to have the wrong zeroing for the displayed range. 50m lands at 100m targets 100m lands at 200 150 lands at 300m and anything above 200m zeroing lands at 400m Share this post Link to post Share on other sites
EricJ 759 Posted March 4, 2015 Okay I'll run it through and see what happens as it shouldn't do that. And if it's an issue I know I can't fix, I'll have to see how to counteract it. If not... well... yeah. Share this post Link to post Share on other sites
EricJ 759 Posted March 6, 2015 Sorry for the delayed response... fired the M320 on the HK416 and quite honestly don't know why you're getting (or me for that matter) a 100m arc when the sight is set for 50m. It could be the general physics of the grenade or could be the fact where everything is positioned as far as the eyepoint, etc. I can tweak it and see what I can do, but overall if you're firing 50m then just for now aim lower until I can come up with a way to adjust the sight. Share this post Link to post Share on other sites
warlord554 2065 Posted March 6, 2015 Must really be in trouble if you need a 50m 40mike mike shot :p Share this post Link to post Share on other sites
bagpiperguy 74 Posted March 6, 2015 (edited) nvm I am a blind man I guess, there they are the 417's I was looking for. Edited March 6, 2015 by BagPiperGuy Blonde Moment Share this post Link to post Share on other sites
EricJ 759 Posted March 6, 2015 Must really be in trouble if you need a 50m 40mike mike shot :p One of my Drill Sergeants in Basic reportedly popped a dude at close range with a 203 so I guess it's "I really have nothing left" (which was that situation) during Desert Storm so methinks if its not going to zero at 50m I can just set it for 100m and go from there though and see how that goes. And cool BagPiperGuy. Share this post Link to post Share on other sites
gatordev 219 Posted March 6, 2015 In Dakota Meyer's testimony for his MoH package, he said he ended up shooting a guy up close with his M203, just like you said, because he had nothing left. It didn't arm, but still knocked the guy down. I can't remember if that was the same guy that he then ended up in hand-to-hand combat with. Definitely a bad day that day, and amazing he made it out alive after returning to the fight so many times. Share this post Link to post Share on other sites
EricJ 759 Posted March 6, 2015 Yeah that was what happened with that DS anyway, I'm not sure if he killed the guy or realistically knocked the shit out of him (given typical a typical physique of an Iraqi soldier) or he blew him up, but from the context it probably just bean bagged him real good as well. I wasn't there so it could be just the "awe" of dealing with somebody who'd been in combat, as we all were at that point anyway. Share this post Link to post Share on other sites
EricJ 759 Posted March 8, 2015 Hey people i don't mind if you add me on Steam no big deal... However you jokers in clans throw an application at me and I'll automatically reject it. Usually I assume it's for gun work and that's fine, or you just want to chat, that's cool. But keep in mind that I'm 38 years old, and mostly busy so I don't always have the time for clans. Nothing wrong with any established clans out there as I've met some great people over the last year and so on and if I feel I'm going to go back into a clan, I'll make that decision, not you. And yes this PSA is because somebody did that. Share this post Link to post Share on other sites
EricJ 759 Posted March 8, 2015 Lol down the road maybe but right now it's just not something I want at the moment. Share this post Link to post Share on other sites
