NATO SF and Russian Spetsnaz WEAPONS for A3

[massi 772]

Thanks a lot for the feedbacks I'll keep them in mind for future release.

Thanks a lot Foxhound and to SIX Team for mirrors ;) !

Regards

massi

[bagpiperguy 74]

Feedback Alert!!!

Since you have the British C8 Carbine, would it be possible in the future to add the Canadian C7,C8,C9,C6 GPMP and maybe the C1A1 (FN FAL) and the C1 SMG... Just suggestions. Maybe an elcan optic that's green to match.. :). I know I am asking alot but.. the other Canadian mod is not updating its files for 1.2.4 so they have no sounds.

[Ketchup0434 13]

Maybe a little less than that, we already have a GPMG and Minimi, we might just ask for a C7, L1A1 SLR and Elcan or C1 SMG :)

[SeBassMann 10]

In some tests we ran into an additional problem with some weapons. As I already told the zeroing for the SVD using the standard PSO is off.

It seems that all weapons with 203 using the red dot optics are off. We found you'd have to aim with the upper edge of the optics instead of the dot to get your grenades on target.

[pleasant 34]

Noticed that the 417CQB does not have a suppressor. In the older version it had one. Any plans to add one? The 417CQB with GL is/was my favorite rifle in all of Arma. Sure would be nice if to have that suppressor back.

Thank you for all your work on this mod pack. These weapons are crucial to our unit and countless others. Thanks again for this awesome update Massi!

[massi 772]

Noticed that the 417CQB does not have a suppressor. In the older version it had one. Any plans to add one? The 417CQB with GL is/was my favorite rifle in all of Arma. Sure would be nice if to have that suppressor back.

Thank you for all your work on this mod pack. These weapons are crucial to our unit and countless others. Thanks again for this awesome update Massi!

hi,

417 CQB still have suppressors, they are : "muzzle_mas_snds_M", "muzzle_mas_snds_Mc" plus the standard BI one.

I just hided the classes in config to avoid having 10 times the same weapon just with different accessories, but all my units have the right suppressor for their weapons in inventory, if they have not a suppressed weapon already, or you can still add them with classnames (you'll find in addon folder) since they're still in, just hided ;)

regards

massi

[subunit 31]

The Skorpion seems to have no recoil..

[Imperator[TFD] 444]

Massi,

Appreciate your hard work and am thoroughly enjoying the mod.

A small visual error I have noticed with the addition of the new SCAR models; when the front hand is gripping the weapon his fingers will clip through whatever rail-accessory is attached (flashlight/IR.) Is it possible to adjust this or look at returning the vertical hand-grip that was present on the SCAR's in Arma 2?

[massi 772]

Massi,

Appreciate your hard work and am thoroughly enjoying the mod.

A small visual error I have noticed with the addition of the new SCAR models; when the front hand is gripping the weapon his fingers will clip through whatever rail-accessory is attached (flashlight/IR.) Is it possible to adjust this or look at returning the vertical hand-grip that was present on the SCAR's in Arma 2?

hi,

unfortunately this is an animation issue, it is the same with and without side accessories so they're clipping, sorry ;)

regards

massi

[armatech 8]

with the new pack massi im getting alot of missing pics Picture

Warning Message: Picture \mas_us_rifle\ui\gear_svd_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_ak74m_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\w\gear_ak74m_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_akms_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\w\gear_akms_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_akm_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_rpk_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_ksvk_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_aks74u_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_rpk_x_ca.paa not found

Warning Message: Picture \mas_us_rifle\ui\gear_pkm_x_ca.paa not found

[massi 772]

with the new pack massi im getting alot of missing pics Picture

hi,

that's quite strange since I've all pictures correctly displayed...try to reinstall latest version with all files included in addon folder, otherwise I don't know sorry

regards ;)

massi

[armatech 8]

ok well i have no clue where its from then as i just redownloaded and unpacked your "mas_us_rifle.pbo" and i don't see "ui" folder yet in your "mas_us_rifle_c.pbo" there is refs all over to it

Line 79: picture = "\mas_us_rifle\UI\gear_laser_ca.paa";

Line 86: picture = "\mas_us_rifle\UI\gear_rsupp_ca.paa";

Line 128: picture = "\mas_us_rifle\UI\gear_rsupc_ca.paa";

Line 218: picture = "\mas_us_rifle\UI\gear_psupp_ca.paa";

Line 266: picture = "\mas_us_rifle\UI\gear_rsupp_ca.paa";

Line 308: picture = "\mas_us_rifle\UI\gear_rsupc_ca.paa";

Line 314: picture = "\mas_us_rifle\UI\gear_rsupp_ca.paa";

Line 356: picture = "\mas_us_rifle\UI\gear_rsupc_ca.paa";

Line 362: picture = "\mas_us_rifle\UI\gear_rsupp_ca.paa";

Line 404: picture = "\mas_us_rifle\UI\gear_rsupc_ca.paa";

Line 457: picture = "\mas_us_rifle\UI\gear_acco_zeiss_ca.paa";

Line 514: picture = "\mas_us_rifle\UI\w\gear_acco_zeiss_ca.paa";

Line 519: picture = "\mas_us_rifle\UI\gear_acco_zeiss_ca.paa";

Line 528: picture = "\mas_us_rifle\UI\w\gear_acco_zeiss_ca.paa";

Line 590: picture = "\mas_us_rifle\UI\gear_acco_dms_ca.paa";

Line 596: picture = "\mas_us_rifle\UI\gear_acco_holo_b_ca.paa";

Line 602: picture = "\mas_us_rifle\UI\gear_acco_holo_ca.paa";

Line 608: picture = "\mas_us_rifle\UI\gear_acco_arco_b_ca.paa";

Line 614: picture = "\mas_us_rifle\UI\gear_acco_arco_ca.paa";

Line 620: picture = "\mas_us_rifle\UI\gear_acco_hamr_ca.paa";

Line 626: picture = "\mas_us_rifle\UI\gear_acco_aco_ca.paa";

Line 632: picture = "\mas_us_rifle\UI\gear_acco_aco_grn_ca.paa";

Line 638: picture = "\mas_us_rifle\UI\gear_acco_mrco_ca.paa";

Line 643: picture = "\mas_us_rifle\UI\gear_acco_triji_ca.paa";

Line 692: picture = "\mas_us_rifle\UI\w\gear_acco_triji_ca.paa";

Line 697: picture = "\mas_us_rifle\UI\gear_acco_triji2_ca.paa";

Line 704: picture = "\mas_us_rifle\UI\w\gear_acco_triji2_ca.paa";

Line 709: picture = "\mas_us_rifle\UI\gear_acco_triji2_ca.paa";

Line 716: picture = "\mas_us_rifle\UI\w\gear_acco_triji2_ca.paa";

Line 721: picture = "\mas_us_rifle\UI\gear_acco_handle_ca.paa";

Line 755: picture = "\mas_us_rifle\UI\gear_acco_aim_ca.paa";

Line 790: picture = "\mas_us_rifle\UI\w\gear_acco_aim_ca.paa";

Line 1000: picture = "\mas_us_rifle\UI\gear_usp_x_ca.paa";

Line 1064: picture = "\mas_us_rifle\UI\gear_usp_x_ca.paa";

Line 1097: picture = "\mas_us_rifle\UI\gear_m23_x_ca.paa";

Line 1161: picture = "\mas_us_rifle\UI\gear_m23_x_ca.paa";

Line 1194: picture = "\mas_us_rifle\UI\gear_acpc2_x_ca.paa";

Line 1254: picture = "\mas_us_rifle\UI\gear_m9_x_ca.paa";

Line 1318: picture = "\mas_us_rifle\UI\gear_bhp_x_ca.paa";

Line 1382: picture = "\mas_us_rifle\UI\gear_glock_x_ca.paa";

Line 1446: picture = "\mas_us_rifle\UI\gear_glocksf_x_ca.paa";

Line 1723: picture = "\mas_us_rifle\UI\gear_uzi_x_ca.paa";

Line 1968: picture = "\mas_us_rifle\ui\gear_M136_X_CA.paa";

Line 2002: picture = "\mas_us_rifle\ui\gear_stinger_X_CA.paa";

Line 2115: picture = "\mas_us_rifle\ui\gear_MAAWS_X_CA.paa";

Line 2343: picture = "\mas_us_rifle\ui\gear_m136_rocket_ca.paa";

Line 2388: picture = "\mas_us_rifle\ui\m_30stanag_CA.paa";

Line 2396: picture = "\mas_us_rifle\ui\m_30stanag_red_CA.paa";

Line 2404: picture = "\mas_us_rifle\ui\m_200LMG_ca.paa";

Line 2413: picture = "\mas_us_rifle\ui\m_200LMG_red_ca.paa";

Line 2470: picture = "\mas_us_rifle\ui\m_30ak74m_ca.paa";

Line 2478: picture = "\mas_us_rifle\ui\m_30ak74m_red_ca.paa";

Line 2486: picture = "\mas_us_rifle\ui\m_100rpk_ca.paa";

Line 2495: picture = "\mas_us_rifle\ui\m_100rpk_red_ca.paa";

Line 2504: picture = "\mas_us_rifle\ui\m_20hk417_ca.paa";

Line 2512: picture = "\mas_us_rifle\ui\m_20hk417_red_ca.paa";

Line 2520: picture = "\mas_us_rifle\ui\m_m24_ca.paa";

Line 2528: picture = "\mas_us_rifle\ui\m_m24_ca.paa";

Line 2536: picture = "\mas_us_rifle\ui\m_30akm_ca.paa";

Line 2544: picture = "\mas_us_rifle\ui\m_30akm_red_ca.paa";

Line 2552: picture = "\mas_us_rifle\ui\m_10svd_ca.paa";

Line 2560: picture = "\mas_us_rifle\ui\m_10svd_red_ca.paa";

Line 2568: picture = "\mas_us_rifle\ui\m_5m107_ca.paa";

Line 2576: picture = "\mas_us_rifle\ui\m_5m107dem_ca.paa";

Line 2584: picture = "\mas_us_rifle\ui\m_5m107_red_ca.paa";

Line 2591: picture = "\mas_us_rifle\ui\m_5m107_ca.paa";

Line 2598: picture = "\mas_us_rifle\ui\m_5m107dem_ca.paa";

Line 2605: picture = "\mas_us_rifle\ui\m_5m107_red_ca.paa";

Line 2613: picture = "\mas_us_rifle\ui\m_30mp5_ca.paa";

Line 2621: picture = "\mas_us_rifle\ui\m_30mp5_ca.paa";

Line 2684: picture = "\mas_us_rifle\ui\m_sa61_ca.paa";

Line 2692: picture = "\mas_us_rifle\ui\m_uzi_ca.paa";

Line 2700: picture = "\mas_us_rifle\ui\m_12gauge_slugs_ca.paa";

Line 2708: picture = "\mas_us_rifle\ui\m_12gauge_ca.paa";

Line 2716: picture = "\mas_us_rifle\ui\m_12gauge_slugs_ca.paa";

Line 2724: picture = "\mas_us_rifle\ui\m_12gauge_ca.paa";

Line 2732: picture = "\mas_us_rifle\ui\m_bizon_ca.paa";

---------- Post added at 12:30 ---------- Previous post was at 12:14 ----------

i think your packing might be iffy as depbo unpacks with out half the items that pbo manager unpacks

[haleks 8212]

Something's definitely wrong on your side : I do have the UI folder in the PBO file.

Try to check if it's there without unpacking (just open it with PBO manager).

[massi 772]

Something's definitely wrong on your side : I do have the UI folder in the PBO file.

Try to check if it's there without unpacking (just open it with PBO manager).

same from me...every time I upload an addon I download it from the website and test it accurately both SP and MP then I check RPT...so there is something wrong on the file you have installed, the only solution I can suggest is to download it again (also from a different source) and reinstall, sorry

best regards

massi

[Apache7 10]

DePBO fails to extract the pbo's properly for some reason, you endup missing half of the stuff in the pbo's. When extracting with something like pbo manager it works fine.

That was armatecs issue with not seeing UI and the rest of the folders.

When attempting to extract with mikero's ExtractPbo it throws this

Derap:Derap: Missing name for class or array
Rap or Derap error

Edited August 10, 2014 by Apache7
EDIT

[armatech 8]

ok i fixed it i did not update asdg_jointrails_mas_weapons.pbo most of the errors are gone now but i still get and asked apache to look and he also could not find the file

Warning Message: Picture \mas_us_rifle\ui\gear_svd_x_ca.paa not found

and should be

\mas_ru_rifle\ui

[haleks 8212]

DePBO fails to extract the pbo's properly for some reason, you endup missing half of the stuff in the pbo's. When extracting with something like pbo manager it works fine.

That was armatecs issue with not seeing UI and the rest of the folders.

When attempting to extract with mikero's ExtractPbo it throws this

Derap:Derap: Missing name for class or array
Rap or Derap error

I had numerous issues with those PBO softwares - including the official tools; to me the most reliable one is PBO manager.

The only thing it doesn't do is binarizing, other than that I never had any trouble with it.

[armatech 8]

\mas_us_rifle_fhq_c\mas_us_rifle_fhq_c\ak\config.cpp

Line 1370: picture = "\mas_us_rifle\ui\gear_svd_x_ca.paa";

Line 1517: picture = "\mas_us_rifle\ui\gear_svd_x_ca.paa";

ok i think its the fhq addon thats the issue

---------- Post added at 14:39 ---------- Previous post was at 14:34 ----------

looks like i did not read the readme

Please remember to REMOVE the old "mas_us_rifle_fhq_c.pbo" since it will brake the new version of the addon.

[massi 772]

Please remember to REMOVE the old "mas_us_rifle_fhq_c.pbo" since it will brake the new version of the addon.

yes as is written in the readme remove this old optional config, the only working optional config is the : "asdg_jointrails_mas_weapons.pbo"

glad you solved the issue

regards ;)

massi

[-Eddie- 10]

Thanks for the great weapons pack, this has allowed me to create much better custom units in the arsenal. Anyway the L119A1 is currently being upgraded by Colt Canada to the L119A2 standard. You'll find it at this link under the L119A2 tab.

[Gunter Severloh 4067]

Massi when i use VAS and I'm looking at suppressor selection for my gun I noticed the name is spelled surpressor, should be Suppressor.

[Ratamahatta 10]

Thanks for this smart and awesome modification.

Im was bit unlucky with the current vanilla future setting in arma 3. Now i found a good alternative to improve my game experience!

[Ratamahatta 10]

If i copy the "asdg_jointrails_mas_weapons.pbo" into ./@mas/addons/ i get an error message saying "Addon 'asdg_jointrails_mas_weapons' requires addon 'asdg_jointrails'".

Can you help me? :)

Edit: Okay i think i see ... asdg_jointrails is a separate mod. :D

Edited August 13, 2014 by Ratamahatta

[BadHabitz 235]

If i copy the "asdg_jointrails_mas_weapons.pbo" into ./@mas/addons/ i get an error message saying "Addon 'asdg_jointrails_mas_weapons' requires addon 'asdg_jointrails'".

Can you help me? :)

Edit: Okay i think i see ... asdg_jointrails is a separate mod. :D

Yup, need to have both mods active.

[massi 772]

hi thanks a lot for feedbacks! ;)

regards

massi