Sneaker-78- 0 Posted October 22, 2008 Xam 1.5 Six_pack 1 and 3 Event handlers 1.9 treugameplaymods EVA ArmaEffects Share this post Link to post Share on other sites
Doomguy 0 Posted October 23, 2008 I'm using the same except for XAM, EVA and truegameplay (I only use AI hearing). Have you tried without these mods? Especially XAM. Doomguy Share this post Link to post Share on other sites
Sneaker-78- 0 Posted October 23, 2008 yes, but that error in top of screen is an script error right ? Share this post Link to post Share on other sites
Doomguy 0 Posted October 23, 2008 That error message is generated when a script runs, however, I know what script it is and I'm pretty sure that it is not the script that is the cause of the problem. Judging from the error message, it seems that something has broken the map markers that are used by the script. Another reason why I think the script is fine: nobody else has reported the error before, and I haven't seen it myself ever. Doomguy Share this post Link to post Share on other sites
colligpip 0 Posted October 23, 2008 I have played this mission loads and I dont see those errors. Share this post Link to post Share on other sites
Sneaker-78- 0 Posted October 23, 2008 Well its sure gives me headache Share this post Link to post Share on other sites
Doomguy 0 Posted October 23, 2008 Updated to 1.1.4. Details and download links in the top post! Doomguy Share this post Link to post Share on other sites
Sneaker-78- 0 Posted October 23, 2008 wich addons are these ? RACS get Army 4x4 with M2's, OPFOR gets a stronger T64 variant (in the addon version). and tnks for the update will try it for sure Edit: Hate it to say it but still getting the error (was hoping that is working) but its a bit strange how i must get into game : 1. i log into the server and choose side and press ok (server loads the mission. and then i get back into to lobby again. 2. when i hit connect again it works now and get in you`re mission and then i get the screen mission etc , when i press to exit that and want to start play arma chrashes to desktop with a nice error from windows (arma is not working anymore) 3. i log in everhting goes well now i get into the game and i gat the error on top of screen all this is with the addon mission and you`re mission without the addon works ok  I give up now , i tried you`re mission, it was good to see the AI now with some nice addons  but it just wont work here and my gf`s pc either or friends pc . Share this post Link to post Share on other sites
Doomguy 0 Posted October 24, 2008 Quote[/b] ] and then i get back into to lobby again. This is the problem. Your dedicated server does not have the addons loaded correctly. Please make sure you have all the required addons... it should work then. Doomguy Share this post Link to post Share on other sites
TOTAL22 0 Posted October 24, 2008 A bug report: 1.1.4 StandAlone version has KA52 in East Aircraft factory. I love your warfare, I just hope there will be a 32 player version, and a version with the whole Sahrani Island. Keep up the good work Doomguy! Share this post Link to post Share on other sites
Doomguy 0 Posted October 24, 2008 A bug report: 1.1.4 StandAlone version has KA52 in East Aircraft factory.I love your warfare, I just hope there will be a 32 player version, and a version with the whole Sahrani Island. Keep up the good work Doomguy! Hi TOTAL22, Thanks for the bug report. I'll fix it soon - in the mean time: don't buy it Mankyle is working on a port to the full Sahrani island. I hope he will release it soon. 32 players version is a little bit easier to implement I guess, but 32 independent AI teams probably trash any server. Doomguy Share this post Link to post Share on other sites
bionicman303 1 Posted October 24, 2008 Updated to 1.1.4. Details and download links in the top post!Doomguy Hi DoomGuy! Thanks a lot for your recent work (and hopefully your future work) on Warfare Cooperative! I had several really intense games with a friend of mine. The atmosphere really rocks :-) Two questions: A question on the enemy AI...if they do capture the airport, should they start building aircrafts and go on direct interdiction/reconnaissance missions (given they have enough funds)? Or is this planned for a future release? I guess, this would give  a lot more tension to the human players as they really would have to take air defense with them on capturing missions etc. Another question also on the enemy AI's tactic: Once, they have spotted your HQ or decided to capture the airport (or another strategic point of interest), will they change their tactic in case they did send a certain number of teams (tanks,infantry) without success? It would be interesting to let the enemy AI attack the players' HQ for a certain time (depending on how much the AI wants to send with his current wave) and to automatically reroute his attacks, e.g., attacking the airport from the south first, and then from the east. Or even split the teams to let them simultaneously attack from different directions? *g* (this is really complicated to implement, I guess...working with synchronized waypoints etc.) A last question, can the enemy AI vary the size of its attacks squads, i.e., sending 2 tanks to a capture a town and the next time probably 4 tanks. This would make his attacks a little bit more unpredictable :-) again, thanks a lot cya bionicman Share this post Link to post Share on other sites
Doomguy 0 Posted October 24, 2008 Quote[/b] ]Hi DoomGuy! Thanks a lot for your recent work (and hopefully your future work) on Warfare Cooperative! I had several really intense games with a friend of mine. The atmosphere really rocks :-) Hi Bionicman303! Great to hear! I've hardly had any time to play it myself recently... good to know that somebody is enjoying it Quote[/b] ]A question on the enemy AI...if they do capture the airport, should they start building aircrafts and go on direct interdiction/reconnaissance missions (given they have enough funds)? Or is this planned for a future release? I guess, this would give a lot more tension to the human players as they really would have to take air defense with them on capturing missions etc. Yes, the AI will purchase planes if it has captured the airport, provided it has enough funds, and there are enemy targets available for it to attack. It will not purchase planes to do recon missions, only interdiction and base strikes. Also, the AI commander will wait a certain time after mission start before it will start purchasing attack aircraft. This is due to performance - aircraft flying around spawn resistance teams at the towns they pass by, causing more (unneeded) units to be active. Quote[/b] ]Once, they have spotted your HQ or decided to capture the airport (or another strategic point of interest), will they change their tactic in case they did send a certain number of teams (tanks,infantry) without success? It would be interesting to let the enemy AI attack the players' HQ for a certain time (depending on how much the AI wants to send with his current wave) and to automatically reroute his attacks, e.g., attacking the airport from the south first, and then from the east. Or even split the teams to let them simultaneously attack from different directions? *g* (this is really complicated to implement, I guess...working with synchronized waypoints etc.) The AI commander will send heavy teams directly to the enemy base if it knows the location, but only if the AI side holds a certain number of towns (3 or 4 from the top of my mind). I like your ideas about attacking the enemy base from different directions, but indeed it's not so easy to make it work. The AI is struggling with path finding a lot already. One idea that might work is let the AI find out which town is to the N, S, E, or W from the enemy base, randomly pick a town, move to that town, then attack the enemy base. The problem with a more generic approach where you would just randomly pick an attack vector, is that there can be water, mountains or forests blocking the way. That stuff is very hard to detect... Quote[/b] ]A last question, can the enemy AI vary the size of its attacks squads, i.e., sending 2 tanks to a capture a town and the next time probably 4 tanks. This would make his attacks a little bit more unpredictable :-) Currently the AI can't do this. It will always purchase all the units in the team template, unless it runs out of funds. It might be interesting if the AI switched team templates depending on the funds it has. That might actually be the easiest way to implement this... I might do it. Doomguy out. Share this post Link to post Share on other sites
dob 0 Posted October 24, 2008 needed addon : "bds_product" plz for the @ version. Share this post Link to post Share on other sites
Doomguy 0 Posted October 24, 2008 needed addon : "bds_product" plz for the @ version. Are you sure? For what vehicle? There should already be bds_m60a3.pbo for the M60. Doomguy Share this post Link to post Share on other sites
dob 0 Posted October 24, 2008 thank i'v missing this addons Share this post Link to post Share on other sites
Sneaker-78- 0 Posted October 24, 2008 Quote[/b] ] and then i get back into to lobby again. This is the problem. Your dedicated server does not have the addons loaded correctly. Please make sure you have all the required addons... it should work then. Doomguy all addons where already there , i even double checked. But please check my server its online now ..and if the errors does now show just relog please Share this post Link to post Share on other sites
mankyle 418 Posted October 25, 2008 Another bug I discovered while porting the Stand alone version. There is an M-1 Abrams (RACS) in the heavy factory list. BTW, more or less I have checked all camp and depot positions for the full Sahrani map and I probably will send it to Doomguy today as soon as I check some other things. Basically I have added all North cities and Towns, all airports and a couple of Bases. I also have moved some starting positions to the North. And some good news. I have added a new config called config_airporttown which is only for airports. Right now it uses F-16 from PRACS and activates when you get nearer than 2400 m from Rahmadi and Antigua. When that happens two RACS f-16 take off from the airports and fly over the islands attacking everythin on their sights. I was flying one GNATs V-22 and I was shot down by one of them while I was trying to capture antigua. Share this post Link to post Share on other sites
Doomguy 0 Posted October 25, 2008 Quote[/b] ] and then i get back into to lobby again. This is the problem. Your dedicated server does not have the addons loaded correctly. Please make sure you have all the required addons... it should work then. Doomguy all addons where already there , i even double checked. But please check my server its online now ..and if the errors does now show just relog please  If you have all addons loaded correctly the dedicated server should not return to the lobby after clicking OK. Sorry I tried to log in to your server yesterday but it wasn't online when I tried (~22:30 CET). Doomguy Share this post Link to post Share on other sites
Sneaker-78- 0 Posted October 25, 2008 srry its online now Share this post Link to post Share on other sites
Doomguy 0 Posted October 25, 2008 srry its online now  I just logged into your server. Indeed, I get hundreds of errors like the one you took a screenshot of. Are you running the server with only the addons required by WACO, or are there more addons running? Doomguy Share this post Link to post Share on other sites
Sneaker-78- 0 Posted October 25, 2008 -some server side addons (there is an topic here on this forum with server side addons ,but cant find it anymore) -Some units -Xam 1.5 -Xeh edit : i just tried the mission only with you`re addons and nothing else on the server , but stil getting the errors Share this post Link to post Share on other sites
lugiahua 26 Posted October 26, 2008 dunno if anyone asked this before but will there any chance that you make a complete island version in the future? (both north and south island) and would you consider to add or replace some units in game? such as more detail Land Rover for RACS http://www.armaholic.com/page.php?id=3205 M1114 armoured humvee for West http://www.armaholic.com/page.php?id=3544 T-80, T-90, BTR-90 for SLA http://www.armaholic.com/page.php?id=3613 http://www.armaholic.com/page.php?id=3704 BMD-1 for SLA http://www.armaholic.com/page.php?id=984 F-16 for West http://www.armaholic.com/page.php?id=3537 Mirage III for West http://www.armaholic.com/page.php?id=3962 SU-25 for SLA http://www.armaholic.com/page.php?id=3650 SU-27 for SLA http://www.armaholic.com/page.php?id=4040 SU-33 for SLA http://www.armaholic.com/page.php?id=3721 CH-47 for west, already in Mapfact pack MV-22 for west http://www.armaholic.com/page.php?id=3311 AH-1Z for RACS http://www.armaholic.com/page.php?id=4090 AAVP7A1 for West http://www.armaholic.com/page.php?id=3438 Leopard II A6 and Wiesel http://www.armaholic.com/page.php?id=3840 Puma for RACS http://www.armaholic.com/page.php?id=4033 (I think RACS should use Puma while US use BlackHawk) sorry if some vehicle already in map, never played Warfare on SLA before... but anyway, this map is awsome... most intense map I ever played, thank you Share this post Link to post Share on other sites
Doomguy 0 Posted October 26, 2008 dunno if anyone asked this beforebut will there any chance that you make a complete island version in the future? (both north and south island) and would you consider to add or replace some units in game? such as <SNIP> sorry if some vehicle already in map, never played Warfare on SLA before... but anyway, this map is awsome... most intense map I ever played, thank you Hi Lugiahua, Mankyle is working on a complete island version - I hope he will release it soon. Thanks for all the links, I'll check them out. Glad you like it! Doomguy Share this post Link to post Share on other sites
mankyle 418 Posted October 26, 2008 I have tested the Sahrani version I have ported. There are some pathfinding issues but nothing unsurmountable. I have found some problems though. - The airport code doesn't work with the radio system. I have to look at the way you have used variables to enable the airport because with multiple airports the radio system doesn't work except with only the normal Paraiso international airport. - There are pathfinding issues with the area near victoria and Mataredo. The AI stucks there a lot. But so far the mission porting goes well: - All town names do work. - Now Antigua and Rahmadi spawn PRACS F16s that take off and fly CAP over those islands, making an aerial assault without air cover a complete suicide. - I have enabled also choppers for the RACS. They are a serious opponent and an AH-6 has blasted my strikers more than once now. I'll try to upload the mission ASAP, but I'd like to polish some things before, such as the camps and depot placements. EDIT: I have taken a look at the airport code, mainly the teambuy and AIteambuy files. You have added a markerpos that uses the runway marker as the spawning position of all wingedairteams. With the standard Warfare mission the spawning position of the planes in the airport code is related to the airport's position so if you have more than one airport and you capture one of them and then spawn some planes, these will be spawned near the airport you have just captured, not in a fixed point determined by the position of one marker. Wat should be done for enabling multiple airports would be creating a variable that uses the town name for refering to the runwaymarker, more or less like the towns code that uses a system based on that towns name or reverting to the standard BIS method of spawning the planes. Anyway an excelent mission so far Share this post Link to post Share on other sites