Absorber 0 Posted April 1, 2018 Hi everyone, Im experiencing very high lagging like in range from 3 to mostly 25 FPS in multiplayer, and in singleplayer with no bots its about 30 to 35 FPS and it depends on how many AI I spawn. I have Radeon RX 550 4GB GDDR5 graphic card,10 GB DDR 3 RAM and AMD`s CPU A8-5600k whose fan was broken accidently and replaced with some other and now it runs on 64 degrees out of 77 max how Core Temp says. I want you to tell me about your experience and suggest me what to do cause i believe i have too good hardware for that kind of performance ( I believed its about that AMD`s processor, but on net it says its better than Intel pentium G3450 which my friend has and he runs multiplayer between 35 and 60 fps (he has radeon R7 graphics with smaller amount of that GPU RAM and 8 GB of PC RAM). Thank you for advices. Share this post Link to post Share on other sites
swtx 42 Posted April 1, 2018 It's more than likely your HD. If you are running a mechanical HD I would strongly urge you to upgrade to a Solid State HD. That will eliminate that lag problem. Whats happing is, A3 is outrunning your mechanical HD. Basically, it can't keep up. Try this guide to increase your FPS and overall game performance. It's the best one out there. Be sure to follow the Nvidia guide in the description to get the most out of your card. Share this post Link to post Share on other sites
Absorber 0 Posted April 1, 2018 So it means it is something wrong with my hard drive (500GB), do I have to buy the new one wtf ? I wasnt even thinking about what connection can hard drive have with game running except if it is enough space for its installation ? Share this post Link to post Share on other sites
swtx 42 Posted April 1, 2018 What kind of HD do you have? Need the brand and whether it's mechanical (7200 RPM) or Solid State. Share this post Link to post Share on other sites
Absorber 0 Posted April 1, 2018 Its "TOSHIBA DT01ACA050 ATA Device", it is spared to C: and D: local discs and i dont know yet how to check this RPM Share this post Link to post Share on other sites
Absorber 0 Posted April 1, 2018 Its 7200 RPM, I checked Share this post Link to post Share on other sites
swtx 42 Posted April 1, 2018 Get you a good solid state HD and follow the guide above and your problems will go away. Scott out! Share this post Link to post Share on other sites
x3kj 1247 Posted April 2, 2018 if you get lags while driving around or flying around by plane (or with editor camera) , then its hard drive related -> read speed is too slow to load all the data. If you get lags and low fps in combat while beeing mostly stationary then it's not the HDD. Using too high object draw distance can have massive effects on performance. Badly optimized missions are also sometimes the cause of poor performance on Multiplayer servers. Share this post Link to post Share on other sites
Absorber 0 Posted April 2, 2018 But is it even possible to have 13 to 24 max fps on 64 palyers server with HDD 500GB (not SSD, but anyway), RX 550 4GB GDDR5, AMD A8-5600k quad core 3.6 GHz, and 10 GB of DDR3 RAM. My friend with lower hardware (at least i think it is) has 35-60 FPS on the server in which in the same time i have 13-3-25 FPS. His specs. are: Intel pentium G3450 3.4 GHz dual core, 8GB DDR3 RAM, R7 240 GPU 4GB DDR3 and 1TB of HDD (not SSD). His PC is much more silent, on my once upon a time i accidentally broke one wing of the cpu fan and replaced this fan with some random took of my old pc. This "new" fan was bigger and not fit in so i improvised it to stay in place in touch with the cooler. So i dont know how my thermal situation was earlier but now when i play arma 3 it goes from 57 - 68 - 72 cels. degrees out of 77 limit. I would ask you if you think that temperature is real ultra high so i need to buy brand new cooler or the fan that fits in my current cooler, or this abnormality is caused by some other factors (my processor is too old so i have to buy i7 or smtng). Share this post Link to post Share on other sites
maquez 141 Posted April 3, 2018 if you use arma 3 on a normal HD then make sure that you defragment that drive every time a arma patch is released this can and will help also for the problem you describe Share this post Link to post Share on other sites
socs 92 Posted April 3, 2018 On 4/2/2018 at 6:55 PM, Absorber said: But is it even possible to have 13 to 24 max fps on 64 palyers server with HDD 500GB (not SSD, but anyway), RX 550 4GB GDDR5, AMD A8-5600k quad core 3.6 GHz, and 10 GB of DDR3 RAM. My friend with lower hardware (at least i think it is) has 35-60 FPS on the server in which in the same time i have 13-3-25 FPS. His specs. are: Intel pentium G3450 3.4 GHz dual core, 8GB DDR3 RAM, R7 240 GPU 4GB DDR3 and 1TB of HDD (not SSD). His PC is much more silent, on my once upon a time i accidentally broke one wing of the cpu fan and replaced this fan with some random took of my old pc. This "new" fan was bigger and not fit in so i improvised it to stay in place in touch with the cooler. So i dont know how my thermal situation was earlier but now when i play arma 3 it goes from 57 - 68 - 72 cels. degrees out of 77 limit. I would ask you if you think that temperature is real ultra high so i need to buy brand new cooler or the fan that fits in my current cooler, or this abnormality is caused by some other factors (my processor is too old so i have to buy i7 or smtng). If you want an even better increase... Disable shadowing... This works with any game that uses shadows for an ambiance effect, if you disable it you wont really notice a difference other than just no shadows... It greatly increases your FPS though and lag... I used to have to play like that but as I got better computer equipment shadow became manageable... Good luck and hope this helps you! Share this post Link to post Share on other sites