Guest Posted May 25, 2016 Thank you very much for sending us the updated release FoxFort :) The new version has been frontpaged on the Armaholic homepage. Blastcore Tracers A3 - FoxFort Edit v1.21 Share this post Link to post Share on other sites
Bamse 223 Posted May 25, 2016 Will the newer version still work ok with stable or is it RC/devbranch only? Share this post Link to post Share on other sites
FoxFort 341 Posted May 25, 2016 Will the newer version still work ok with stable or is it RC/devbranch only? This version works good with v1.58 and at the same time it's ready for v1.60 1 Share this post Link to post Share on other sites
alexcroox 29 Posted May 25, 2016 Thank for this, does this fix the giant "ball" tracer bug I've seen over the past month or so? Share this post Link to post Share on other sites
FoxFort 341 Posted May 25, 2016 Thank for this, does this fix the giant "ball" tracer bug I've seen over the past month or so? I don't know about that. The BCT has been tested with HLC, Massi and RHS weapons. There is also support for ACE. Outside of those mods I don't know. But be sure to use correct optional PBOs with these mods. Share this post Link to post Share on other sites
Axon1 67 Posted May 25, 2016 I don't know about that. The BCT has been tested with HLC, Massi and RHS weapons. There is also support for ACE. Outside of those mods I don't know. But be sure to use correct optional PBOs with these mods. Your mod will be working with RHS? Share this post Link to post Share on other sites
FoxFort 341 Posted May 25, 2016 Your mod will be working with RHS? It works now and it will continue to work with RHS, that's why it was written that it was tested with RHS weapons ... Share this post Link to post Share on other sites
kremator 1065 Posted May 25, 2016 Thanks for the update. So IF I'm running RHS I just drop the optional pbo into the addons then? I noticed that the ACE pbo is the same as the one in addons.... by design or should it have _ace after it ? Share this post Link to post Share on other sites
FoxFort 341 Posted May 25, 2016 Thanks for the update. So IF I'm running RHS I just drop the optional pbo into the addons then? I noticed that the ACE pbo is the same as the one in addons.... by design or should it have _ace after it ? Yes, just drop optional PBO into man AddOn and that's it. As for ACE if you have read the ReadMe file, you will replace primary pbo with one from ACE folder and that you should back up primary one. Share this post Link to post Share on other sites
khaosmatical 237 Posted June 1, 2016 I know this thread is for the tracers but Blastcore FX thread is locked.Seems on 1.60 there is an issue with heavy weapons by the looks of things and am wondering if anyone knows how to fix it? Seems to occur every time you fire a high caliber weapon such as the 3CB Wildcat's cannon: Share this post Link to post Share on other sites
sqb-sma 66 Posted June 1, 2016 Go to the first post on this topic and read the 3rd line, what does it say? Well I'll be. What the heck was I thinking of? Could've sworn it was OS who this whole drama was about a year ago. Oh, it was the main mod apparently not BC-tracers. Interesting. I'll edit my comment to reflect that, apologies for the misinformation. Share this post Link to post Share on other sites
FoxFort 341 Posted June 1, 2016 I know this thread is for the tracers but Blastcore FX thread is locked. Seems on 1.60 there is an issue with heavy weapons by the looks of things and am wondering if anyone knows how to fix it? Seems to occur every time you fire a high caliber weapon such as the 3CB Wildcat's cannon: Sorry, I only can work with BCT addon. Well I'll be. What the heck was I thinking of? Could've sworn it was OS who this whole drama was about a year ago. Oh, it was the main mod apparently not BC-tracers. Interesting. I'll edit my comment to reflect that, apologies for the misinformation. OS gave a green light only for this addon, other addons are still locked by OS. Share this post Link to post Share on other sites
FoxFort 341 Posted July 21, 2016 Hey everyone, I've updated tracers to work with Apex DLC new weapons/bullets. You DO NOT need to own Apex DLC in order to use it. If you own Apex, it will be activated, If you don't have Apex it will be still activated but it will not interfere with your gaming.MediaFire Download 2 Share this post Link to post Share on other sites
kremator 1065 Posted July 21, 2016 Thanks for the update ! 1 Share this post Link to post Share on other sites
[BL] Hannibal 16 Posted July 21, 2016 Thanks for this! 1 Share this post Link to post Share on other sites
FoxFort 341 Posted July 22, 2016 If you find any bugs, either post them here or PM me. Share this post Link to post Share on other sites
Guest Posted July 22, 2016 Thank you for sending us the updated release mate :) The new version has been frontpaged on the Armaholic homepage. Blastcore Tracers A3 - FoxFort Edit v1.22 Share this post Link to post Share on other sites
Bamse 223 Posted August 10, 2016 Hey FoxFort. I really appreciate you keeping Tracers up to date! However, with the optional RHS pbo, most vehicular 20mm, 30mm grenades creates huge smoke puffs upon detonation. It seems to have something to do with the inheritance you rewrite alot of the ammo with. In the rhs_ammo_30x113mm_M789_HEDP case, in RHS it inherits from B_30mm_HE, but in your config you rewrite that inheritance to BulletBase. I tried creating a patch that loads after your patch where I change the inheritance back to B_30mm_HE and while applying your tracer info, there's no more mini smoke bombs fired from the RHS AH64, AH1Z, ZSU-24 and so on. If you want I could send you a small code sample. 1 Share this post Link to post Share on other sites
FoxFort 341 Posted August 10, 2016 Good spotting mate, well If you want, you can upload your optional pbo here, so that people can use with my version. It's up to you :) 1 Share this post Link to post Share on other sites
Bamse 223 Posted August 10, 2016 Copy that! I only "fixed" a few so far. I'll run through and test them all and link it here. I think it'll be done by the weekend or so. Cheers! 1 Share this post Link to post Share on other sites
Bamse 223 Posted August 11, 2016 Here's the file I've tested out for a day or so. Seems to work fine, minus the smoke puffs generated when you use the optional smoke-pbo in Blastcore. Keys and everything is in there; https://dl.dropboxusercontent.com/u/4170539/arma3/mods/release/%40bamse_rhs_bct_fix_v1.0.zip 2 Share this post Link to post Share on other sites
Guest Posted August 12, 2016 Release frontpaged on the Armaholic homepage. Bamse RHS Blastcore Tracers - FoxFort Edit Smoke Fix v1.0 Blastcore Tracers A3 - FoxFort Edit Share this post Link to post Share on other sites
dukenukem. 12 Posted August 15, 2016 Here's the file I've tested out for a day or so. Seems to work fine, minus the smoke puffs generated when you use the optional smoke-pbo in Blastcore. Keys and everything is in there; https://dl.dropboxusercontent.com/u/4170539/arma3/mods/release/%40bamse_rhs_bct_fix_v1.0.zip sorry for being a n00b, but how do you use this fix? just use the 1.22 version from foxfort and overwrite his files with your fix? thanks! :lol: Share this post Link to post Share on other sites
Bamse 223 Posted August 15, 2016 My small fix doesn't overwrite any files. Use FoxForts mod as usual and just load this one aswell, either by loading it as a separate mod, or just put my small file in the directory where you have foxforts files already. Exactly how you do it really doesn't matter as long as it gets loaded. My small fix depends on foxforts mod so it will be loaded afterwards. 3 Share this post Link to post Share on other sites
sonsalt6 105 Posted August 31, 2016 New mod v1.0 available at withSIX. Download now by clicking: Hey FoxFort , you can upload updates or new mods to withSIX yourself now! Make your own promo page, get the power to release your work at your own point of choosing. To learn more, follow this guide. Share this post Link to post Share on other sites
