Sever26 0 Posted April 3, 2008 Does anyone know if this will work with arma... Share this post Link to post Share on other sites
max power 21 Posted April 3, 2008 what he said + it's an awesome joystick. Share this post Link to post Share on other sites
twisted 127 Posted April 3, 2008 For me this joystick revolutionises flying in Arma. Especially combined with trackIR. Share this post Link to post Share on other sites
frederf 0 Posted April 3, 2008 I have the X-45, the predecessor to the X-52 and I think it's a great joystick for IL-2 or Falcon 4.0 or something but honestly ArmA doesn't have enough buttons to warrant it. Those FCS sticks are really stiff and a Cyborg Evo is much kinder to most all pilots in ArmA. Share this post Link to post Share on other sites
Inkompetent 0 Posted April 3, 2008 I really like using my X52 in ArmA. Works like a charm. Only thing I miss now is a TrackIR Share this post Link to post Share on other sites
Punisher5555 0 Posted April 3, 2008 I have the full X52 setup (joystick, throttle, and pedals) plus the trackir4. The X52 pedals and trackir4 help out tremendously. You have to setup the pedals as keyboard input to make them work. The only downside to all this awesome setup is the responsiveness of the helicopters. As stated in other threads the helicopters don't fly like helicopters. They fly like airplanes. They go from 0 to a bizzilion miles per hour in 1 second. They have no "weight" so the blackhawk is the same as the ah-6. They are just too fast. Share this post Link to post Share on other sites
brit~XR 0 Posted April 3, 2008 I have the x52 pro but never got around to using it on arma. It just been collecting dust lol. Did use it on the game Lockon which was nice Share this post Link to post Share on other sites
OrLoK 20 Posted April 4, 2008 Hello, Slightly ot, but does anyone use a HOTAS Cougar with arma? A bit stiff is it not? If solt me know your results. I used to have an x45 methinks, and found it much better for general gaming tham my Cougar (although I wouldnt swap it for the world). Rgds LoK Share this post Link to post Share on other sites
Guest RKSL-Rock Posted April 4, 2008 Hello,Slightly ot, but does anyone use a HOTAS Cougar with arma? A bit stiff is it not? If solt me know your results. I used to have an x45 methinks, and found it much better for general gaming tham my Cougar (although I wouldnt swap it for the world). Rgds LoK I use the Cougar HOTAS, its fine for me. But I'm more of a sim pilot than a gamer Share this post Link to post Share on other sites
Wobbler 0 Posted April 4, 2008 Does anyone know if this will work with arma... I use the X52 PRO HOTAS setup in ArmA along with a TrackIR. It works very well. It's just a shame I can't use my rudder pedals for flying the helos and jets as well! :-) Share this post Link to post Share on other sites
Punisher5555 0 Posted April 5, 2008 Wobbler, Send me a PM and I will email you the X52 rudder pedals setup for ArmA. Share this post Link to post Share on other sites
HogRoot 0 Posted April 10, 2008 I've noticed in jets when I apply power with the throttle I get no response until the 50% mark, and then it is a sudden boost of power. Can anyone tell me if its possible to have power applied gradualy...will Arma recognize it? This would help tremendously while moving the jet around on the runway or an ac carrier. Please post instructions on how to set it up Thanks HogRoot Share this post Link to post Share on other sites
Pollux77 0 Posted April 11, 2008 I got a X52 Pro and the same issues with the throttle. I'm afraid it's just a common problem which cannot be solved by us useres, it needs to be patched. In fact i find it much easier to fly the Warthog by Mouse and KB than with my Joystick. Sad but true.. If anyone knows better I'd be glad to hear it here! Share this post Link to post Share on other sites
All-a-Mort 0 Posted April 26, 2008 Could anyone using an X52 Pro with ArmA tell me what settings to use? I couldn't get it to recognise the throttle properly either and have been finding the stick far too 'responsive' for yaw...it seems to make the planes roll ridiculously easily (and then crash). Do i need to tone down the sensitivity a little in the settings? lastly, is there a way to enable the ArmA menu system to be used with the throttle buttons/wheels? I couldn't work out how to make it do it. Any help would be much appreciated. Share this post Link to post Share on other sites
FritzDaKat 0 Posted April 26, 2008 So re: Throttle "Bug". Is this just using the natural throttle function or have you actually tried making a macro and tying various bands to the ingame keypresses? Should have never given my X-45 to a friend. I miss the rudder paddle on the throttle. I never could understand why the X-52 went back to that shite Stick-twist method for Yaw control aside from it being a way to "force sales" of their pedals... Share this post Link to post Share on other sites
All-a-Mort 0 Posted April 29, 2008 I've not tried setting bands in the throttle axis in the SD6 software for ArmA, but when using the software to set functions for the hat switches and dials ArmA didn't recognise them as present. The 8-way hat switch on the stick records no input either in game. Only the scroll wheel on the throttle seems to work and that is as default 'mouse wheel'. I've had slightly more success just setting the controls in ArmA's own controls menu but again many buttons do not appear to be recognised and it seems to have difficulties distinguishing between the main stick and throttle axis and the dials and precision slider. The throttle response set in ArmA works to a degree but it is a little unresponsive. Engine pitch noise gives an indication that the throttle is controlling engine power but other than at the extreme end of the throttle (0 and 100) I've not noticed much difference in speed. I've had more problems setting the fire buttons to work for targeting. I had set the launch button for 'Next Target' and Fire B for 'Target/Zoom' with Fire A as weapon select. It is a little clunky though. Trying to change it had the odd effect of it failing to record any input for Targeting, meaning I had to use the keyboard to target. Not exactly HOTAS eh? Share this post Link to post Share on other sites
FritzDaKat 0 Posted April 29, 2008 I've not tried setting bands in the throttle axis in the SD6 software for ArmA, but when using the software to set functions for the hat switches and dials ArmA didn't recognise them as present. The 8-way hat switch on the stick records no input either in game. Only the scroll wheel on the throttle seems to work and that is as default 'mouse wheel'.I've had slightly more success just setting the controls in ArmA's own controls menu but again many buttons do not appear to be recognised and it seems to have difficulties distinguishing between the main stick and throttle axis and the dials and precision slider. The throttle response set in ArmA works to a degree but it is a little unresponsive. Engine pitch noise gives an indication that the throttle is controlling engine power but other than at the extreme end of the throttle (0 and 100) I've not noticed much difference in speed. I've had more problems setting the fire buttons to work for targeting. I had set the launch button for 'Next Target' and Fire B for 'Target/Zoom' with Fire A as weapon select. It is a little clunky though. Trying to change it had the odd effect of it failing to record any input for Targeting, meaning I had to use the keyboard to target. Not exactly HOTAS eh? Well for starters it would help if the SD6 wasnt so clunky to begin with. Are you setting these up as keypresses, macros, etc? If it's just set as a single keypress I've found it nessisary often to define the keypress duration manually as many times the keypress occours too breifly for it to register ingame (IIR, default duration is 00:05 or some silly shite like that.) This is part of the reason my X52 is now alongside IL2 46' and Lock On quietly gathering dust. So as it's been some time since I last used the programming software, all I can say is to be sure that when programming inputs they are set to be active as long as you hold the switch, not a "pre-timed" duration or a string of repeating inputs. Again, this was my experience with IL2 so ArmA may yet prove different in how it responds. I may get bored enough to try it out myself but if I do I know I'll be right back to my IL2 46' addiction (What a flipping awesome game) Sorry in advance if you've already done as I suggested, but I know some folks have had issue with assigning inputs to triggers properly. SD6 always made me wonder if they were expecting people to be playing more Tekken and Street Fighter than flight sim's with the darned thing as it's so well designed for setting up Combo-type moves yet such a pain in the arse for setting up flight controls in nearly any game Share this post Link to post Share on other sites
All-a-Mort 0 Posted April 30, 2008 Well for starters it would help if the SD6 wasnt so clunky to begin with.Are you setting these up as keypresses, macros, etc? If it's just set as a single keypress I've found it necessary often to define the keypress duration manually as many times the keypress occurs too briefly for it to register in-game (IIR, default duration is 00:05 or some silly shite like that.) Think I prefered the SST software that came with the unit, at least that was user-friendly. That said Saitek's idea of a manual isn't exactly comprehensive in either version. I created a new ArmA profile last night mapping the game keyboard controls to the throttle and stick. The buttons work fine mostly, but having entered the 'Zoom' button with a duration of 3 seconds, it behaves a little strangely...sometimes a tap means it stays on, other times I have to double tap to make it zoom. Couldn't get the throttle to work for thrust or the stick rotate to work as rudder though in the profile editor...not sure what I was doing. I did try setting the keys to bands in SD6 with a void in between them for 'cruise control' but couldn't get it to work. Don't sufficiently understand the whole 'Direction axis' v 'bands' stuff. Reading previous posts on the forum, it seems apparent that ArmA considers thrust as keypresses of the increase and decrease thrust keys not as an axis in-game so the throttle is never going to work overly well. Instead I just set them in ArmA controls. Rather a pity I can't map a function to the pinkie key...would've liked to use it for the external view toggle. Also a pity that menu functions don't have individual assignable keys to use...seems a waste with buttons going empty whilst the menu has numerous functions there (especially with the targeting options for Franze's F-18s). Still, works ok for planes (mostly using Footmunch's f-16s and Franze's f-18s) and makes that part of ArmA now playable. Hell, if someone as rubbish as I can shoot down aircraft with guns then it must be useful. Share this post Link to post Share on other sites
FritzDaKat 0 Posted April 30, 2008 Rather a pity I can't map a function to the pinkie key...would've liked to use it for the external view toggle. Also a pity that menu functions don't have individual assignable keys to use... IIR, the pinkie switch is "Shift" by default, so quite possible to swap shift & numpad enter use in ArmA, then it should work. Using Macros for the triggers / rotary bands would be possible if the menu wasn't so friggin "dynamic" but it would be possible to define generic macro's that would work for most cases ( Not near ammo boxes / vehicles ) by setting the macro as "Enter, arrow down x# of times, enter" Etc. Now I'm just getting curious... I'll blow the dust off my X52 and get something sorted out in the next few days. Share this post Link to post Share on other sites
llama_thumper 0 Posted May 26, 2008 any setups for ArmA would be great - anyone? Share this post Link to post Share on other sites
Buzz 0 Posted May 26, 2008 I have the X45 HOTAS and am looking for a profile to use with ArmA; or is it better to configure it through ArmA? Share this post Link to post Share on other sites
Inkompetent 0 Posted June 1, 2008 I've uploaded my X52 .pr0 profile to Filefront: LINK Note: POV Hat 3 (left) is bound to my Push-to-talk key I use in TeamSpeak (mouse button 4), so I suggest you change that to your preference. The throttle, twist rudder and all stuff like that has been bound inside ArmA. The binds are setup to work in all three modes, so it doesn't matter which one you have active. Good for absent-minded people like me. Info: The setup is made a bit after how I'm used to have my Falcon 4.0 profile, so it might not seem fully logical for ArmA, all keys are set to the default keybinds in ArmA, and it is as follows: Trigger: Fire A: 1st/3rd person view B: Weapon Sights C: Optics D: Target E: Fire Mode Toggle 1: GPS toggle Toggle 2: Map POV Hat 1 (lower one on stick): Look around POV Hat 1 Up + Pinkie: Center view POV Hat 1 Down + Pinkie: Center view POV Hat 3 Right (throttle one): Use Action POV Hat 3 Up: Scroll up POV Hat 3 Down: Scroll down POV Hat 3 Left: Microphone POV Hat 3 Left + Pinkie: VON (in-game voice) Slider: Zoom in/out Share this post Link to post Share on other sites