What do you think of my sopmod m4a1

[stgn 39]

I am making more different versions.

STGN

[-TU--33ker 0]

It's a great looking gun, but IMHO the time of M4 addons is over. there are already many of them out there. I'd like it if you use your talent to make something new and different.

[GoOB 0]

The gun looks great as [TU]$33ker mentioned. Very nice and detailed. But I too would also want to see some new fresh ideas. Like modern Russian handguns, and rifles in general. A bolt action Russian rifle would be great. Also some fictious version of the AK-series a Nogovian police rifle perhaps?

[9mm 0]

I'll be downloadng it for sure!

just make it JAM compatibile.

[Sinister-tnuC- 0]

Too many M4's is never enough!!!

nice work STGN

[Lifter 0]

Well, we don't have any (nice) sopmod m4s without accesories, so.. go ahead, make more m4s.

IMHO the front sight is a little bit shallow, and the Rail interface system looks edgy (not cylinder like).

otherwise, nice gun.

[Lifter 0]

If you want me to explain in detail what I mean, let me know.

[Major Fubar 0]

Looks good, but (as mentioned above) there are already too many M4/M16 variants the OFP addon market...sorry.

[stgn 39]

Well, we don't have any (nice) sopmod m4s without accesories, so.. go ahead, make more m4s.

IMHO the front sight is a little bit shallow, and the Rail interface system looks edgy (not cylinder like).

otherwise, nice gun.

Well I know that about the front sight I am gona fix that.

But I don't onder stand what you mean by the RAS being edgy I have looked at meany pictures of RIS and RAS and think that it is a prity good result I have made. But if I have made somthing rong please tell.

I know that here has been made meany M4/M16's but I think that meany of them are outdated(compared to my own) among them flipers M4s(great pack whick I have had tons of fun whit there was only one isue the M4 where to big and too short). Mathjis C7's (also a good addon loves the ELcan optic but they where too long and and too blue). Sjb made som m4's but that was just Flipers m4's once again and some CS converts I think. I don't like the CS's cause they have some small isues and I don't like CS that much, it liturately make me pjuke(throw up) one time. BAS M4's was once again fliper's but where better tho not good enough compared to the quality of ther other addons. Earl made a fine looking(and very fine sounding) M16A2 but the green on the textures made it look blury(on my computer) and the front grib was only round(not like the BIS one where it is flat where the holes are as in real life). A guy called rangerbob made some M4's/M16's which was BIS model's retexture most they where oka dut diden't have different LOD's.

I don't hope I have insulted eny one whit what I am saying just the things I found rong whit them, they are still great addons. I ofcause will try to make my addons free of souch small isues as good as I can(whit one limitation "polys" as you might think these guns arn't "light" and I arn't planing to go higer the basic SOPMOD whit four coverplats and ironsight has ca. 1050 polys).

The guns are gona be JAM compatible iventho I m not so found of the setting of the JAM M4's but due to all the multiplayers and missions maklers I am making them compatible.

STGN

[waffendennis 0]

My first comment that was coming up in me was: Oh...No...Not....Again.. as you may know thousend of weapons have been made for OFP, and all the same. But thats not what I wanted to say i wanted to say: I like the look of it, but I dont think I am downloading it. Because: I got many and many M4 weapons, but maybe I give it an try you never know.

[@cero 0]

I was going to say don't boder, but after reading your reasons and opinions about other weapon addons I will consider it .

I'm not a lover of M4 and any of the M16s, but something worht the download is allways in my hard drive.

BTW, you forgot to mention the excelent M16A2 from the Danish Army Addons.

[stgn 39]

I was going to say don't boder, but after reading your reasons and opinions about other weapon addons I will consider it .

I'm not a lover of M4 and any of the M16s, but something worht the download is allways in my hard drive.

BTW, you forgot to mention the excelent M16A2 from the Danish Army Addons.

Well that addon was a mix between a CS and OFP I have never played whit it but from what I have seen it has some mistakes first the M16A2 dosen't have a flattop and the front grib is from a M4 and it looks a bit sillyand I heard that the guns did not have "eny" recoile.

I love the M16 family and it is not only the SOPMOD I am making also meany others like the m4 whit CQB barrel(like the BAS seals has), M16A1, M16A2, M16A3, and maby M16A4.

XM177E1 and E2, earlyer versions of the M4, the Mk12 SPR(M4 SPR), the SAS M16A2, M16A2mg(can't remember what it is called).

STGN

[Heatseeker 0]

I dont know what you mean about the BAS ones really, i was playing around with the game the other day and dropped a black M4reflexM203 to the ground and started looking at it from the pistol sight, at 1280x1024 and with Antialising set to 4 it looked real , yours looks great too and i would like to see a better quality screeny of it without jagged edges and stuff, i could use one with simple iron sights so keep up the good work .

[stgn 39]

I dont know what you mean about the BAS ones really, i was playing around with the game the other day and dropped a  black M4reflexM203 to the ground and started looking at it from the pistol sight, at 1280x1024 and with Antialising set to 4 it looked real   , yours looks great too and i would like to see a better quality screeny of it without jagged edges and stuff, i could use one with simple iron sights so keep up the good work .

Well the front sight has somthings rong whit it(shape). and also the but stock has some rongs(which ain't on my guns I can't explain it in english)

and I have forgot somthing I have to giv some credit to cheeky monky ho made the IER pack which I have borrowed som parts of the model from(and improved them).  

What is jagged eges(do you mean jpg compression).

STGN

[One 0]

i really like it, it actually looks like it fits into the game more, ie looks more bis'ish

[stgn 39]

i really like it, it actually looks like it fits into the game more, ie looks more bis'ish

Thank you maby it is beacuse its a modified BIS model whit bis textures

It is funny that 304 hav been to this threat and there are only 14 replies.

STGN

[AOCbravo2004 0]

How is work on the pack going? ARe you going to add an M-16A4 and M4 RIS with an M68 Aimpoint on it??? I see this sight lacking on M4's made for Op:FP. The M68 seems to be issued to quite a bit of soldiers, especially those in the 18th Airborne Corps(101st AA Div, 82nd ABN Div, 10th MTN Div, 3rd INF Div). I've seen more M68's then the Trijicon ACOG or Reflex sights. I would absolutely love to have an M4 RIS, M-16A4, with M68's on them, oh also on the versions with the -203. I tried making an M4/M203 with M68 with the INQ M4 Construction pack, but my Grenade Launcher doesn't work, the sight just spins around, and I dont know why. Thanks again.

George

[r71 0]

I love the M4 so much that I went out and bought one pic of me with M4A3 Your guns are looking good so far, but I only use InQUisiToR's version. If you could make a version like mine that would be great. The scope I use has a 3-9x42 zoom, and the ret's can light up on it for night use. I can also still use my iron sights with the mount I have. These guns are loud as hell and have very little kick.

M4A3 and H&K USP40cal

[One 0]

thats an airsoft, i hope..........

[r71 0]

thats an airsoft, i hope..........

lmao    ugh!  Real gun proof

[Heavy Metal 0]

It's a Bushmaster with a Mini Y-Comp on the muzzle.

If you want to update the model, make the buttstock with the latest reinforced butt assembly also know as the "waffle" stock

[Heavy Metal 0]

Btw, the Waffle stock is latest US Mil issue.

[bmgarcangel 0]

I just finished a M4A1 SOPMOD wit silencer! It looks a heluva alot better than this one sry

[r71 0]

It's a Bushmaster with a Mini Y-Comp on the muzzle.

If you want to update the model, make the buttstock with the latest reinforced butt assembly also know as the "waffle" stock

That is the buttstock I have in a way. Mine is a post ban so I cant have it fold up Maybe when the AWB sunsets they will not pass another one.

[bmgarcangel 0]

The bush master is way overated......they have had problems also in the stock and some mis-firings.aka bullets exploding for no damned reason when they leave hte magazine and into the firing chamber