Doors Off

[LeftSkidLow 1]

Is it possible to add something to the init field of a helicopter to remove the doors?

[Mavericko 0]

bump? Also does anyone know if you can do the same but with like the camera, the flir camera and so on?

[Master85 1]

for the light helicopter you can use

this animate ["addDoors", 0];

to remove the doors - head limits, sounds, ... aren't affected, to change those a config is necessary.

[Mavericko 0]

for the light helicopter you can use

this animate ["addDoors", 0];

to remove the doors - head limits, sounds, ... aren't affected, to change those a config is necessary.

Ah thank you! Is there a list of animations anywhere, so we can modify them to have FLIR, Mirror, Camera and so on as we see fit?

Okay after experimenten, the same command with logical names work, like "addMirror" "addBenches" though "addCamera" did not work

Edited November 19, 2011 by Mavericko

[DnA 5138]

Some interesting selection names to start you off with:

Light

Showing and hiding components:

• AddDoors
  
• AddBenches
  
• AddBackseats
  
• AddFLIR
  
• AddFLIR2
  
• AddScreen1
  
• AddHoldingFrame
  
• AddTread_Short
  
• AddTread
  
• AddGunHolder
  
• AddMusicUnit
  
• AddMirror
  

Animating the exterior benches to folded position:

• BenchL_Up
  
• BenchR_Up
  

Maintenance and inspection:

• Inspect_Panel1_1
  
• Inspect_Panel2_1
  
• Inspect_Panel1_2
  
• Inspect_Panel2_2
  

Main doors (use animateDoor instead of animate):

• DoorL_Front_Open
  
• DoorR_Front_Open
  
• DoorL_Back_Open
  
• DoorR_Back_Open
  

Cockpit switches:

• RadioDisplay_ON
  
• BatteriesSwitch_On
  
• FuelSwitch_On
  
• LightsACSwitch_On
  
• LightsLDGButton_On
  
• RadioButton_On
  

Medium

Showing and hiding components:

• AddFLIR
  
• AddFLIR_controlpanel
  
• AddSearchLight
  
• AddWinch
  
• AddMILITARY_cargoseats
  
• AddRocketLaunchers
  
• AddGuns
  

Maintenance and inspection:

• Inspect_Panel1_1
  
• Inspect_Panel2_1
  

Main doors (use animateDoor instead of animate):

• DoorL1_Open
  
• DoorL2_Open
  
• DoorL3_Open
  
• DoorR1_Open
  
• DoorR2_Open
  
• DoorR3_Open
  

Heavy

Showing and hiding components:

• AddGunHolder
  
• AddWinch
  

Moving winch to active position:

• Winch_UpperPole
  
• Winch_LowerPole
  
• Winch_Hook
  

Maintenance and inspection:

• Inspect_Panel1_1
  
• Inspect_Panel2_1
  
• Inspect_Panel3_1
  

Main doors (use animateDoor instead of animate):

• door_back_L
  
• door_back_R
  
• CargoRamp_Open
  

[Mavericko 0]

Ah thank you! This ought to keep my occupied =)

[hon0 10]

It's great but how can we get these features active?

[b101_uk 10]

It's great but how can we get these features active?

in the heli "initalization" box set

for the light heli e.g. (0 sets off, 1 sets on, numbers >0.01 <0.99 do nothing)

this animate ["addDoors", 0];

this animate ["AddBenches", 0];

this animate ["AddBackseats", 0];

this animate ["AddFLIR", 0];

this animate ["AddFLIR2", 0];

this animate ["AddScreen1", 0];

this animate ["AddHoldingFrame", 0];

this animate ["AddTread_Short", 0];

this animate ["AddTread", 0];

this animate ["AddGunHolder", 0];

this animate ["AddMusicUnit", 0];

this animate ["AddMirror", 0];

Medium doors, note R3 is the right 3rd door from frunt, L3 is the left 3d door from the frunt, 0 = shut, 1 = open.

this animatedoor ["DoorR3_Open", 0];

this animatedoor ["DoorL3_Open", 0];

if you want to run the doors open/shut from e.g. a trigger you would use the heli "object" name in place of "this" in the trigger.

[hon0 10]

I know that but it don't "work"

For ex I can't use the flir camera after adding it to my chopper. It's only visual.

Edited November 28, 2011 by hon0

[dustoff 0]

in the heli "initalization" box set

for the light heli e.g. (0 sets off, 1 sets on, numbers >0.01 <0.99 do nothing)

this animate ["addDoors", 0];

this animate ["AddBenches", 0];

this animate ["AddBackseats", 0];

this animate ["AddFLIR", 0];

this animate ["AddFLIR2", 0];

this animate ["AddScreen1", 0];

this animate ["AddHoldingFrame", 0];

this animate ["AddTread_Short", 0];

this animate ["AddTread", 0];

this animate ["AddGunHolder", 0];

this animate ["AddMusicUnit", 0];

this animate ["AddMirror", 0];

Medium doors, note R3 is the right 3rd door from frunt, L3 is the left 3d door from the frunt, 0 = shut, 1 = open.

this animatedoor ["DoorR3_Open", 0];

this animatedoor ["DoorL3_Open", 0];

if you want to run the doors open/shut from e.g. a trigger you would use the heli "object" name in place of "this" in the trigger.

got this to work in the editor when I preview but somethings dont work when ran on a server

[Mavericko 0]

I know that but it don't "work"

For ex I can't use the flir camera after adding it to my chopper. It's only visual.

As far as I know, you can't just jump into the chopper and use the camera. It only triggers when it is near an object linked to a waypoint. I might be wrong, but that is the only way I've used it.

[beepee 10]

You can. But you need to sit on backseat in front that big monitor (camera) or on copilot seat (searchlight). Than you can use it with Numpad 0.

[hon0 10]

I use this line :

this animate ["addDoors", 0]; this animate ["addFLIR", 1]; this animate ["addFLIR2", 1]; this animate ["addHoldingFrame", 1]; this animate ["addTread", 0]; this animate ["addTread_Short", 1]; this animate ["addMusicUnit", 1];

At the moment it don't work I'll try to delete one of these flir

[Mavericko 0]

You can. But you need to sit on backseat in front that big monitor (camera) or on copilot seat (searchlight). Than you can use it with Numpad 0.

Ah yes in the medium heli, I've only tried it in the light and there it doesn't work.

[b101_uk 10]

for outside of sling loading waypoints etc, have you not got to use bis_fnc_PIP

[hon0 10]

Is it possible to bind something that animate the exterior bench "on the fly"?

Thanks

Antoine

[hon0 10]

I tried this command. It work but when I try to use Flir or Camera I get a White screen. Nothing else.

[[evo] dan 79]

Yeah I am still struggling to get the camera to work. Can anyone give me anymore help?

edit - I have got it working using the BIS fnc PIP but I have no clue hoiw to move the camera around. Also the view isnt coming from the camera but instead from the underneath and I can see inside the helo with it. How would I get the view to stick to the camera?

["rendertarget0",[[heli1,heli1 selectionposition "slingload0"],cargo1],heli1,false] call BIS_fnc_PIP; is what I am using.

Edited December 15, 2011 by [EVO] Dan

[beepee 10]

Yes, tried it two days ago. I can add a camera or searchlight to helicopter with this command: this animate ["AddSearchLight", 1]; but it doesn't work. I think there are two different commands, one to add camera visually and another one to add camera functionality. But I don't know the second. Can anyone shed a light on this?

[b101_uk 10]

for the Medium heli there is also

AddCargoHook_Cover

AddCargoHook

as in

this animate ["AddCargoHook_Cover", 0]; this animate ["AddCargoHook", 1];

to give the cargo hook

[accroalhelico 1]

same question "honO"

how to use the FLIR to the editor

i'm newbie

[blakeace 11]

same question "honO"

how to use the FLIR to the editor

i'm newbie

This is probably your best starting point.

http://forums.bistudio.com/showthread.php?t=128444

[drdavid 10]

Sorry to be dim but can you explain where the "heli "initalization" box set" is, please?

ToH is the first BIS game that I've installed so I'm a noob at this sort of edit!

Thamks very much for your help...

Cheers - Dai. :cool:

[[evo] dan 79]

its the popup box in the editor when you try to place something down, on the right hand side of the popup box somewhere.

[drdavid 10]

Thanks - I'll take a look...

Cheers - Dai. :cool:

Edited January 3, 2012 by drdavid
New reply received - thanks.