strongbird 10 Posted December 9, 2009 a problem with Addon sync 2009 I updated it and gaves all errors Error extracting with almost all files what is that? Share this post Link to post Share on other sites
vivien 0 Posted December 9, 2009 Yoma's put my CBA into the following folder, - -edit: Check you're pointing your command line to the correct location for CBA, too (easily overlooked). it was a target problem! now i can launch arma with ace but I still have problem, there are missing titles at the menu screen Share this post Link to post Share on other sites
Remon 10 Posted December 9, 2009 (edited) You don't have the same version as the server Nope, no problem like that at all, it's an installation problem, I'm getting it too, and I'm not sure how it can be fixed. Btw, I can't use the SIX updater, I'm getting a SIX updater error, "/six-Updater/six-updater.yml config missing!". Edited December 9, 2009 by Remon Share this post Link to post Share on other sites
menjoo 10 Posted December 9, 2009 OMG, 172 pages in two days! Anyway, nice to have the mod in ArmA2 now! I also had problems to install it but with the help of AddonSync 2009 and the "lazy"-fix it now works like a charme. Thank you guys for all your work on this! Share this post Link to post Share on other sites
wjpenn 10 Posted December 9, 2009 Its very hard to keep up with these forums so sorry if it has been asked previously. Has the nuke that infantry can carry been implemented yet? not the nuke you script to put on a plane but the one infantry can set up. If so how do i use that and where do i find it? just wanted to check it out! Thanks Will Share this post Link to post Share on other sites
An Fiach 10 Posted December 9, 2009 Hmm, when I got it all I did was update. For you guys new to the forum, I am not affiliated with ACE, just trying to help somewhat. Did you install . 1.9 updater? ---------- Post added at 05:21 PM ---------- Previous post was at 05:20 PM ---------- Its very hard to keep up with these forums so sorry if it has been asked previously. Has the nuke that infantry can carry been implemented yet? not the nuke you script to put on a plane but the one infantry can set up. If so how do i use that and where do i find it? just wanted to check it out! Thanks Will Not yet, it will be in a future release. Share this post Link to post Share on other sites
DeclaredEvol 10 Posted December 9, 2009 I have found a serious issue, not to complain or whine. But I have discovered that CAA1 Project does not work with A.C.E. I have tried reinstalling CAA1, and I have also tried only running ACE and CAA1 mods. And they apparently do not like each other. I do come up with an error that the CAA1_p_roads are not compatible or something. Anyways hope things come out correctly, Btw... I LOVE THE MOD!!! It makes ArmA2 so intense!!! thank you!! Share this post Link to post Share on other sites
sickboy 13 Posted December 9, 2009 Nope, no problem like that at all, it's an installation problem, I'm getting it too, and I'm not sure how it can be fixed.Btw, I can't use the SIX updater, I'm getting a SIX updater error, "/six-Updater/six-updater.yml config missing!". Feed it a config file :) http://dev-heaven.net/wiki/ace-mod2/Lazy Share this post Link to post Share on other sites
spirit6 51 Posted December 9, 2009 Getting this too. Like said above the server and client dont match. It might be you that is ahead on the server. Talk to the server admin. Share this post Link to post Share on other sites
runforrest 10 Posted December 9, 2009 thanks for the great mod ACE team :bounce3: 1 question, is it possible to disable or lower the fiiiiiep sounds when explosion r to close etc... ? that sound kills my real ears and i dont wanna get deaf from a game. @DeclaredEvol caa1 works fine for me, just missions from arma1 campaign seem not to work Share this post Link to post Share on other sites
Dr.Pulp 0 Posted December 9, 2009 Getting this too. can try our FAKK server. it is up to date (updated 20:30 CET) Share this post Link to post Share on other sites
cross 1 Posted December 9, 2009 http://www.kellys-heroes.eu/forum/rss.php an hour ago.. :) Share this post Link to post Share on other sites
cossack8559 10 Posted December 9, 2009 Think i found a bug with the Su-34 Fullback... when you fire the GSh-30 cannon it sounds like a missile has just been fired... kind of hard to explain just put down 1 Su-34 and fire its cannon as pilot.... Share this post Link to post Share on other sites
An Fiach 10 Posted December 9, 2009 (edited) nvm was commented on Edited December 9, 2009 by anfiach Share this post Link to post Share on other sites
DeclaredEvol 10 Posted December 9, 2009 thanks for the great mod ACE team :bounce3:1 question, is it possible to disable or lower the fiiiiiep sounds when explosion r to close etc... ? that sound kills my real ears and i dont wanna get deaf from a game. @DeclaredEvol caa1 works fine for me, just missions from arma1 campaign seem not to work Strange, hmm... It tells me that EnablePorto needs the file CAA1_p_Roads. And both files are perfectly intact. I suppose they guy below is right, this isn't meant to work with older files. Then how is it working for you? Did you install the A.C.E extras and core as well? Share this post Link to post Share on other sites
VKing 12 Posted December 9, 2009 I have two folders in my user config folder related to ACE. One has the name 'ACE' the other'ACE_1260280801' I take it the latter is the later version; and they both contain the same files. I edited the clientside_config in the 'ACE_1260280801' one, but I'm confused as to wether I'll have to do this everytime I update the game. Had no problems with the updater, nifty bit of kit in fact, saves loads of pissing about, and have played ACE without issue in the (albeit small amount) of time I've played. Great it is too:)I've searched the Wiki and this thread so apologies if I've missed the answer. The folder with no number string behind it is the one that's used, the others are backups because they were replaced for some reason. I'm not sure exactly why this happens, but you should be able to just replace the new current folder with the old one if it happens again. Share this post Link to post Share on other sites
instagoat 133 Posted December 9, 2009 I´ve had some problems with ACE CTD´ing, but I found that it wouldn´t happen anymore when removing all other mods. I´ve not been able to discern which one it is, yet. I´ve got a hunch that it is CAA1, which I´ve not updated in a while either. On another note, I wondered if Rucksack funtionalities are only fully enabled for players? I found that when opening the gear inventory of AI soldiers, you can drop Items into the ruck, but not get them out again anymore. Share this post Link to post Share on other sites
My Fing ID 0 Posted December 9, 2009 How do you install this? I downloaded a .zip and tossed it in Arma2. Nothing, it crashes and won't load. I tried following some directions but I basicly downloaded garbage that did nothing but show funny screens while I followed a list of what buttons and keys to press. Anyways you guys can get this down to the same installation as any other Arma2 mod or am I just sol? Cool idea though, I liked the first ACE. Share this post Link to post Share on other sites
sickboy 13 Posted December 9, 2009 How do you install this? I downloaded a .zip and tossed it in Arma2. Nothing, it crashes and won't load. I tried following some directions but I basicly downloaded garbage that did nothing but show funny screens while I followed a list of what buttons and keys to press. Anyways you guys can get this down to the same installation as any other Arma2 mod or am I just sol? Cool idea though, I liked the first ACE. The so called "Lazy Method" gets you started in no time: http://dev-heaven.net/wiki/ace-mod2/Lazy Share this post Link to post Share on other sites
My Fing ID 0 Posted December 9, 2009 (edited) Thanks for the quick responce. Can't wait, you guys did great with the first one. Edit: Out of curiosity why the complex installation? Why couldn't folders just be tossed in like most mods? Edited December 9, 2009 by My Fing ID Share this post Link to post Share on other sites
An Fiach 10 Posted December 9, 2009 Strange, hmm... It tells me that EnablePorto needs the file CAA1_p_Roads. And both files are perfectly intact. I suppose they guy below is right, this isn't meant to work with older files. Then how is it working for you? Did you install the A.C.E extras and core as well? May be file corruption. I loaded ACE core and it worked. one thing I did find was that the CSW have collision issues with the terrain, when you mount the gun, the whole thing sinks into the ground. All ACE features seemed to be working fine though. You may want to ask if they can eventually incorporate CAA1 into ACE or that CAA1 be altered but like I said, they made ACE to be a stand alone mod set and other mods may or may not work with it. Share this post Link to post Share on other sites
Wild 10 Posted December 9, 2009 you can download patches from this link Patch download Just goto patches Folder! If it does not have the patch just Keep checking it may still be uploading Share this post Link to post Share on other sites
An Fiach 10 Posted December 9, 2009 Thanks for the quick responce. Can't wait, you guys did great with the first one.Edit: Out of curiosity why the complex installation? Why couldn't folders just be tossed in like most mods? Due to constant updates it is easier for the installer to update the relevant files rather than you having to download the entire mod file every time. Share this post Link to post Share on other sites
Richey79 10 Posted December 9, 2009 it was a target problem!now i can launch arma with ace but I still have problem, there are missing titles at the menu screen Not sure what you mean by this - noone will be able to help unless you describe the problem in a bit more detail. The simple suggestions: A) An example command-line (in case you're not pointing towards Ace properly) "C:\Program Files\Bohemia Interactive\ArmA 2\beta\arma2.exe" -nosplash -mod=beta -mod=@ace -mod=@cba -mod=@acex Remove -mod=beta and beta\ if you're not using Arma2 beta patch. B) Go to C:\Program Files\Bohemia Interactive\ArmA 2\@ACE\userconfig and copy the four files in there to C:\Program Files\Bohemia Interactive\ArmA 2\userconfig. Apart from this, with no other problem description, the only other suggestion would be to redownload ACE using 'the lazy method' (see post 1722). Double-check that your Arma2 install hasn't become corrupted somehow by running without any mods. Good luck, Share this post Link to post Share on other sites
sickboy 13 Posted December 9, 2009 Thanks for the quick responce. Can't wait, you guys did great with the first one.Edit: Out of curiosity why the complex installation? Why couldn't folders just be tossed in like most mods? NP. Please check Updater Suite Presentation. Share this post Link to post Share on other sites