BIS MODEL INTO GAME

[ocramweb 0]

Hello everybodies,

As I am not any good at 3d modeling, I think a good start will open possibilities to many people.

working config for default bis model will be a nice start.

solved for now:

.Bissoldier working: tutorial posted by JBtm

[ocramweb 0]

Ok for a start.

me I took the hummer bis model.

made the following config:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class CfgPatches

{

class DsT_Ocram

{

Units[]= {

"DsT_hmmwv_Ocram"

};

weapons[]= {};

requiredVersion = 1.000000;

requiredAddons[] = {"CAData", "CACharacters", "CAWeapons", "CASounds", "CA_Anims_Char"};

};

};

class CfgVehicleClasses

{

class DsT_vehicles

{

displayName = "Ocram Vehicles";

};

};

class CfgVehicles

{

/*extern*/ class HMMWVMK;

class DsT_hmmwv_Ocram: HMMWVMK

{

vehicleClass = "DsT_vehicles";

displayName="(Bis) Hmmwv (Mk19)";

model="BIHummer";

};

};

I can load the game, open the editor select the hummer, but CTD when i click on preview.

in arma rpt file i have:

mainturrer no geometrie no shape.

maingun no geometrie no shape.

? I did not tuch anything on the p3d

help is more than welcomed.

[Jackal326 1181]

Well,

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">model="BIHummer";

is incorrect for the path to the model, it should be something like:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">model="PBONAME\Modelname.p3d";

[ocramweb 0]

thx , very much but not the solution, same errors.

anybody have a working cpp for the bis hummer ?

It's a shame, I made this post so people could post a working cpp, for each BIS model given for o2.

so community could start learning(beginners like me..).

But I see that nobody wanna share,it'a a shame cause it could have been a good start for lot of us, to understand.

[.kju 3245]

PBONAME should be PBOPREFIX, like

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE"> class HMMWV50: Car

{

scope = 2;

Model = "\ca\wheeled\HMMWV50";

Picture = "\Ca\wheeled\data\ico\HMMWV50_CA.paa";

Icon = "\Ca\wheeled\data\map_ico\icomap_hmwv50_CA.paa";

from ArmA\addons\wheeled\config.cpp

PBOPREFIX is to be found in the PBO.

Open the file PBOPREFIX with a text editor to see the path

you need to use.

[ocramweb 0]

isn't it what this does:

/*extern*/ class HMMWVMK;

the car icon shows well in editor and inside the menu,

but it is just that: no shape error - main turret

and i did not tuch the bis model.

i am just trying to figure it out.

[.kju 3245]

I was only pointing out how the path works.

Please post your current config again.

[ocramweb 0]

I did not modifieanything, it is still the same as the one on top of posts.

If i can't make a bis model work in game, i can't see the point of doing anything to it.

i'll just wait for someone to release a working hmmwv.

to see the config for it.

[.kju 3245]

try to replace

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE"> model="BIHummer";

with

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">Model = "\ca\wheeled\HMMWV50";

or comment the line out

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">//model="BIHummer";

--

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE"> /*extern*/ class HMMWVMK;

This defines the class as being inherited from "somewhere".

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">class DsT_hmmwv_Ocram: HMMWVMK

This makes your class get all the values from "HMMWVMK",

besides the one your define yourself in this class.

[ocramweb 0]

oh, i see now what you meant,

but i dont want to call the original model from inside the game i whant to open 'my' Bihummer.p3d (witch is the bis one for o2).

this is why i call model="BIHummer";

which sit on the root folder of my pbo.

thanks for keeping answering.

[Panda-PL- 0]

this is why i call model="BIHummer";

which sit on the root folder of my pbo.

If so it should be "yourPBOname\BIHummer"

[ocramweb 0]

SO SORRY GUYS. and thanks again for your patience with my dummy brain...

Jackal326 and Panda[PL] got it.

and "yourPBOname\BIHummer" does not work

but "\yourPBOname\BIHummer" is the one.

I have the flames of the gun always on do..

[Jackal326 1181]

You'll need to add a CfgModels section to define the model.

[Pantiflex 0]

Hi to all!  

 For an experiment I added a standard model of  US soldier in ARMA. I used an unpacked BIS model. I opened it in “Oxygen 2 Personal Editionâ€, then saved it without any changes, added config and packed to PBO and… you can see a result on the screen below.

  My config’s here:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class CfgPatches

{

class tastB

{

units[]={"man1"};

weapons[]={};

requiredVersion = 1.05;

requiredAddons[]={};

};

};

class CfgVehicleClasses

{

class testB {

displayName="Sold";

};

};

class CfgVehicles

{

/*extern*/ class soldierEB;

class man1: soldierEB{

model="\bimodels\BISoldier.p3d";

accuracy=5;

displayName= "Rifleman";

nameSound = "";

picture = "\Ca\characters\data\Ico\i_SF_CA.paa";

Icon = "\Ca\characters\data\map_ico\i_komandos_CA.paa";

weapons[] = {AK74,"Throw","Put",};

magazines[] = {"30Rnd_545x39_AK","30Rnd_545x39_AK","30Rnd_545x39_AK"};

camouflage=0.5;

               vehicleClass = "testB";

threat[] = {1, 0.1, 0.1};

class Wounds{

tex[]={};

mat[] = {"bimodels\bisoldier\data\us_molle_webbings.rvmat",

"ca\characters\data\np_hhl_wound2.rvmat",

"bimodels\bisoldier\data\us_soldier_body.rvmat",

"bimodels\bisoldier\data\us_soldier_equip.rvmat",

"ca\characters\data\np_soldier_b_body_wound2.rvmat",

"bimodels\bisoldier\data\us_soldier_equip.rvmat",

"bimodels\bisoldier\data\us_hhl.rvmat"};

};

};

};

 Where is a problem? Config? p3d?  Please, help.  

PS Excuse me for my bad english.

[.kju 3245]

Not sure, but you might have to binarize the cpp to bin again

in this case.

[Pantiflex 0]

There is no difference between ccp or bin. The same result.

[.kju 3245]

requiredAddons[]={"ca_characters"};

not sure how its called correctly, yet you might need to define

the class relation to the infantry/character pbo.

[Synide 0]

change....

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

.....

class man1: soldierEB{

model="\bimodels\BISoldier.p3d";

.....

to...

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

.....

class man1: soldierEB{

model="\bimodels\BISoldier.p3d";

moves="CfgMovesMaleSdr";

.....

[Pantiflex 0]

Q, Synide

Thanks for the help, but unfortunately nothing has helped.

By the way, other standard models of soldiers (for ex. "res_soldier_g.p3d", "us_soldier_crew.p3d", "us_soldier_b.p3d"...) work well with the given config, except for "us_soldier.p3d", "res_soldier.p3d" and may be "np_soldier.p3d" (I didn't test it). With these models same trouble. It's strange.

[Synide 0]

hmmm that is strange, 'cause looking at your small pic on the previous page you're character is in the standard "I've got no animations defined for me pose".

That is... if you take a standard BIS character config from characters.pbo and set it's moves to nothing it results in that exact same pose your character has...

eg.

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class CfgPatches

{

class aawBodies

{

units[] = {"aawTestBodySniper"};

weapons[] = {};

requiredVersion = 1.050000;

requiredAddons[] = {"CAData","CACharacters","CAWeapons"};

};

};

class CfgVehicleClasses

{

class aawBodies {displayName = "AAW Bodies";};

};

class CfgVehicles

{

class SoldierWSniper;

class aawTestBodySniper : SoldierWSniper

{

 displayName = "AAW Test Body Sniper";

moves = "";

vehicleClass = "aawBodies";

};

};

this pose was useful when we were doing a lot of skinning of BIS character models at the start of modding ArmA but is since no longer needed. It highlights though the same pose that your character has which made me think somewhere in you're config hierarchy you're definition for the moves="CfgMovesMaleSdr"; has gotten trashed... that was the only thing i could think of atm...

maybe one of the modders putting out lots of characters atm will see this thread and make more helpful reply... good luck...

ps. I always find the best way to debug the process is to start simple and small and make incremental changes to you're config... takes a lot longer but invariably works.

[VXR 9]

hmmm that is strange, 'cause looking at your small pic on the previous page you're character is in the standard "I've got no animations defined for me pose".

That is... if you take a standard BIS character config from characters.pbo and set it's moves to nothing it results in that exact same pose your character has...

eg.

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class CfgPatches

{

class aawBodies

{

units[] = {"aawTestBodySniper"};

weapons[] = {};

requiredVersion = 1.050000;

requiredAddons[] = {"CAData","CACharacters","CAWeapons"};

};

};

class CfgVehicleClasses

{

class aawBodies {displayName = "AAW Bodies";};

};

class CfgVehicles

{

class SoldierWSniper;

class aawTestBodySniper : SoldierWSniper

{

 displayName = "AAW Test Body Sniper";

moves = "";

vehicleClass = "aawBodies";

};

};

this pose was useful when we were doing a lot of skinning of BIS character models at the start of modding ArmA but is since no longer needed. It highlights though the same pose that your character has which made me think somewhere in you're config hierarchy you're definition for the moves="CfgMovesMaleSdr"; has gotten trashed... that was the only thing i could think of atm...

maybe one of the modders putting out lots of characters atm will see this thread and make more helpful reply... good luck...

ps. I always find the best way to debug the process is to start simple and small and make incremental changes to you're config... takes a lot longer but invariably works.

I'm having the same problem with the BIS HMMWV model, it all works ingame, I can drive and shoot but the Things that are animated (wheels, rotating turret, etc) do not move for some strange reason.

Same is happening with the Soldiermodel from BIS, it also doesnt have any animations on it.

[ravendk 25]

things aint animated cos your missing Models.cfg ... I got one that puts a soldier ingame.. PM me for it

[Synide 0]

@VXR... for you're hummer, did you have the model.cfg that came from the BISExamples.zip in the same folder as you're hummer.p3d when you Binarized it?

if not, you might want to try that...

[schroeder 0]

Hi to all!  

 For an experiment I added a standard model of  US soldier in ARMA. I used an unpacked BIS model. I opened it in “Oxygen 2 Personal Editionâ€, then saved it without any changes, added config and packed to PBO and… you can see a result on the screen below.

  My config’s here:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class CfgPatches

{

class tastB

{

units[]={"man1"};

weapons[]={};

requiredVersion = 1.05;

requiredAddons[]={};

};

};

class CfgVehicleClasses

{

class testB {

displayName="Sold";

};

};

class CfgVehicles

{

/*extern*/ class soldierEB;

class man1: soldierEB{

model="\bimodels\BISoldier.p3d";

accuracy=5;

displayName= "Rifleman";

nameSound = "";

picture = "\Ca\characters\data\Ico\i_SF_CA.paa";

Icon = "\Ca\characters\data\map_ico\i_komandos_CA.paa";

weapons[] = {AK74,"Throw","Put",};

magazines[] = {"30Rnd_545x39_AK","30Rnd_545x39_AK","30Rnd_545x39_AK"};

camouflage=0.5;

               vehicleClass = "testB";

threat[] = {1, 0.1, 0.1};

class Wounds{

tex[]={};

mat[] = {"bimodels\bisoldier\data\us_molle_webbings.rvmat",

"ca\characters\data\np_hhl_wound2.rvmat",

"bimodels\bisoldier\data\us_soldier_body.rvmat",

"bimodels\bisoldier\data\us_soldier_equip.rvmat",

"ca\characters\data\np_soldier_b_body_wound2.rvmat",

"bimodels\bisoldier\data\us_soldier_equip.rvmat",

"bimodels\bisoldier\data\us_hhl.rvmat"};

};

};

};

 Where is a problem? Config? p3d?  Please, help.  

PS Excuse me for my bad english.

I've got the same problem, and can't figure out how it works. Configs for ArmA seem to be quite different from those for OFP...

[Jackal326 1181]

Hi to all!  

 For an experiment I added a standard model of  US soldier in ARMA. I used an unpacked BIS model. I opened it in “Oxygen 2 Personal Editionâ€, then saved it without any changes, added config and packed to PBO and… you can see a result on the screen below.

  My config’s here:

<table border="0" align="center" width="95%" cellpadding="0" cellspacing="0"><tr><td>Code Sample </td></tr><tr><td id="CODE">

class CfgPatches

{

class tastB

{

units[]={"man1"};

weapons[]={};

requiredVersion = 1.05;

requiredAddons[]={};

};

};

class CfgVehicleClasses

{

class testB {

displayName="Sold";

};

};

class CfgVehicles

{

/*extern*/ class soldierEB;

class man1: soldierEB{

model="\bimodels\BISoldier.p3d";

accuracy=5;

displayName= "Rifleman";

nameSound = "";

picture = "\Ca\characters\data\Ico\i_SF_CA.paa";

Icon = "\Ca\characters\data\map_ico\i_komandos_CA.paa";

weapons[] = {AK74,"Throw","Put",};

magazines[] = {"30Rnd_545x39_AK","30Rnd_545x39_AK","30Rnd_545x39_AK"};

camouflage=0.5;

               vehicleClass = "testB";

threat[] = {1, 0.1, 0.1};

class Wounds{

tex[]={};

mat[] = {"bimodels\bisoldier\data\us_molle_webbings.rvmat",

"ca\characters\data\np_hhl_wound2.rvmat",

"bimodels\bisoldier\data\us_soldier_body.rvmat",

"bimodels\bisoldier\data\us_soldier_equip.rvmat",

"ca\characters\data\np_soldier_b_body_wound2.rvmat",

"bimodels\bisoldier\data\us_soldier_equip.rvmat",

"bimodels\bisoldier\data\us_hhl.rvmat"};

};

};

};

 Where is a problem? Config? p3d?  Please, help.  

PS Excuse me for my bad english.

I've got the same problem, and can't figure out how it works. Configs for ArmA seem to be quite different from those for OFP...

Not really, you still needed a CFGMODELS section in OFP, which is what you need to fix your unit for ArmA too...