SCAR-L Replacement Project

[slatts 1978]

Yea don't worry I'm playing around with the reload time between shots :)

[pachira 1]

This sounds great, would be nice to have to replace my RH M4 replacement mod. Will this work with JSRS?

[slatts 1978]

This sounds great, would be nice to have to replace my RH M4 replacement mod. Will this work with JSRS?

It *should* do...I use that lightly after the M16A3 messed up JSRS..but so far I've found no errors with this pack :)

---------- Post added at 17:46 ---------- Previous post was at 17:17 ----------

Can you say Firing Port Weapon? ;)

http://i296.photobucket.com/albums/mm180/guitaro-man/arma2oa2013-01-0917-36-36-91_zpsae4278ac.png

NOTE: I know there's still quite a bit of to it, mainly the receiver and carry handle.

P.S. Getting those TWS sights isn't looking too good :/

Edited January 9, 2013 by Slatts

[islesfan186 83]

Have you tried hitting up the ACE team and maybe seeing if they would let you use there's?

[slatts 1978]

Have you tried hitting up the ACE team and maybe seeing if they would let you use there's?

It's the same model (unless there's a different one from the OA model on the SCAR) ;) I'm not gonna go into it too much to keep clear of going off topic, I'm just a bit peeved my request was flat out denied yet I've seen BIS models given with permission in the past and I was told that Arma 1 samples were "what I was looking for".

[lennard 447]

A lot of weapon models that are used in OA/Arma 2 and ACE are by Dasquade and Scubaman3D. I believe Scubaman3D is a member of the ACE team so you could always have a try there.

[slatts 1978]

A lot of weapon models that are used in OA/Arma 2 and ACE are by Dasquade and Scubaman3D. I believe Scubaman3D is a member of the ACE team so you could always have a try there.

Thanks for that Lennard, I'll drop him a PM ;)

[slatts 1978]

Something tells me the recoil might be a taaad too much :p

(The rate of fire is correct though)

90KaYjgmbvU

[R0adki11 3949]

Nice video, keep up the great work. Also you have inspired me to add weapon attachments to my Nogovan rifles pack. I love the under slung shotgun.

[slatts 1978]

Glad I inspired someone with my shoddy work :p Thanks mate :D

[slatts 1978]

So it's looking like I won't get the models I need, so if anybody wants to jump on board and make a few models, drop me a PM :)

other then that, no other updates

[R0adki11 3949]

So it's looking like I won't get the models I need, so if anybody wants to jump on board and make a few models, drop me a PM :)

other then that, no other updates

What about using the sights from your AUG pack, i know these perhaps realistic for M4s. But they could work?

[slatts 1978]

I could use an ACOG as a place holder, or have no optics at all but still have the scope effect as it is now ;)

[islesfan186 83]

what about hitting up RobertHammer for some of his stuff? he made an ACOG with the backup red-dot on one of his M14s. or you could try Alwarren for the EOTech w/ magnifier, and Meatball...he made a pretty sweet SpecterDR for his M4s on his MARSOC guys

[slatts 1978]

what about hitting up RobertHammer for some of his stuff? he made an ACOG with the backup red-dot on one of his M14s. or you could try Alwarren for the EOTech w/ magnifier, and Meatball...he made a pretty sweet SpecterDR for his M4s on his MARSOC guys

Don't worry I'm searching around and Alwarren has already PM'd me regarding a few models.

It's been a week since I was told No and then later on Yes. I could get them any day now with things happening at BIS.

[max power 21]

I don't think the recoil of the port firing weapon is too much. Those things were not really designed to be used without the firing port. They did have tracers, though. Also, they had a couple versions when they were playing with the rate of fire. Not that the actual thing is made of M16a1 parts.

I had planned to do this thing as well as the colt survival rifle but maybe now I don't have to. BTW check out this survival rifle:

If an m16 had babies with a blunderbuss...

[slatts 1978]

Yea I config'd a new mag for the FPW with all tracers,

A M16 blunderbuss....must resist the temptation.. :D

[slatts 1978]

Much thanks to Alwarren who donated a few models for mod :D

The old Aimpoint has been replaced with a CompM4 : http://i296.photobucket.com/albums/mm180/guitaro-man/arma2oa2013-01-1818-56-52-01_zps4b61b20e.png

And the ACOG now has the back up RDS: http://i296.photobucket.com/albums/mm180/guitaro-man/arma2oa2013-01-1818-57-37-77_zps2205ddce.png

[Zupadupazupadude 10]

That looks lovely Slatts, can't wait!

[slatts 1978]

Just a quick picture before I go drinking (I'll have one or 10 for Ivan & Martin)

This is the M4 to replace the Crewman's SCAR-L: http://i296.photobucket.com/albums/mm180/guitaro-man/arma2oa2013-01-1921-18-29-21_zps38fef562.png

There's a new-ish model for the stock just to make it slightly different and newer (to go on all when ready) and the stock isn't extended to give a look of being pulled out of a vehicle in an emergency, what are you're thoughts on this?

[Sakai 1]

Looks splendid good sir!

But blueeh everytime I see the BIS M4 Receiver, for some reason it looks "pixelated" or "blocky" from my point of views, but ofc thats not connected to the topic what so ever :P

[Zupadupazupadude 10]

It looks great man!

[gatordev 219]

Slatts,

Looks sharp, but is it just me or does it look like the barrels are 16 inches? Seems like the length from the 203 notch to the flash hider is little too long, especially if you measure using the handguards (which are ~7").

[slatts 1978]

Slatts,

Looks sharp, but is it just me or does it look like the barrels are 16 inches? Seems like the length from the 203 notch to the flash hider is little too long, especially if you measure using the handguards (which are ~7").

Could be, just hoe thry are default..im like sooo drunk I cant tell so like yea miht be.../

[slatts 1978]

Could be, just hoe thry are default..im like sooo drunk I cant tell so like yea miht be.../

Jesus H Christ...what the hell did I drink..