heli_flying 10 Posted October 31, 2011 what tools i need to do it?:confused: thanks ;) Share this post Link to post Share on other sites
LeftSkidLow 1 Posted November 3, 2011 (edited) I think you're gonna need the "eliteness" tools and an XML editor. Looks like the values are stored in an xml file (which is in a pbo file). Here is my config: <!-- REFERENCES [1] Technical Description.pdf [2] Wikipedia [3] Field manual [4] Technical manual [5] Blueprints --> <?xml version="1.0"?> <GenHeli600 version="1.0"> <!-- Estimation Calculated after the ration R_mass = (empty weight of dauphin) / (empty weight of MD500) ratio = (2271)/(722) = 3.1454293629. Ixx = 11000/R_Mass = 3497 Iyy = 2704/R_Mass = 859 Ixx = 9900/R_Mass = 3147 --> <MomentsOfInertia Ixx="3497" Iyy="859" Izz="3147"/> <!--[2] Empty Weight=722 kg Max Takeoff Weight=1610 kg Any value between empty weight and max takeoff weight is valid. --> <Mass mass="722"/> <Fuselage rotationalResistance="100" > <MainRotorDownwash scale="0.5"> <Low_a1 a1 ="-6"> 0 1.4958 10.0000 1.4955 20.0000 1.4939 30.0000 1.4881 40.0000 1.4694 50.0000 1.4149 60.0000 1.2801 70.0000 1.0072 80.0000 0.5652 90.0000 0.0000 </Low_a1> <Medium_a1 a1 ="0" scale="0.5"> 0 1.4958 10.0000 1.4955 20.0000 1.4939 30.0000 1.4881 40.0000 1.4694 50.0000 1.4149 60.0000 1.2801 70.0000 1.0072 80.0000 0.5652 90.0000 0.0000 </Medium_a1> <High_a1 a1 ="6" scale="0.5"> 0 1.4958 10.0000 1.4955 20.0000 1.4939 30.0000 1.4881 40.0000 1.4694 50.0000 1.4149 60.0000 1.2801 70.0000 1.0072 80.0000 0.5652 90.0000 0.0000 </High_a1> </MainRotorDownwash> <MainRotorInplanewash scale="0.5"> <Low_a1 a1 ="-6"> 0 0.1124 10.0000 0.1125 20.0000 0.1127 30.0000 0.1138 40.0000 0.1176 50.0000 0.1333 60.0000 0.2000 70.0000 0.4472 80.0000 1.0415 90.0000 1.5000 </Low_a1> <Medium_a1 a1 ="0" scale="0.5"> 0 0.1124 10.0000 0.1125 20.0000 0.1127 30.0000 0.1138 40.0000 0.1176 50.0000 0.1333 60.0000 0.2000 70.0000 0.4472 80.0000 1.0415 90.0000 1.5000 </Medium_a1> <High_a1 a1 ="6" scale="0.5"> 0 0.1124 10.0000 0.1125 20.0000 0.1127 30.0000 0.1138 40.0000 0.1176 50.0000 0.1333 60.0000 0.2000 70.0000 0.4472 80.0000 1.0415 90.0000 1.5000 </High_a1> </MainRotorInplanewash> <LiftDueToAoA scale="0.1"> -180.0000 -0.0001 -170.0000 0.4658 -160.0000 0.9087 -150.0000 2.7566 -140.0000 4.1489 -130.0000 4.9260 -120.0000 4.9619 -110.0000 3.3846 -100.0000 1.7154 -90.0000 -0.0005 -80.0000 -1.7144 -70.0000 -3.3820 -60.0000 -4.9578 -50.0000 -4.9208 -40.0000 -4.1432 -30.0000 -2.7511 -20.0000 -0.5829 -18.0000 -0.5107 -16.0000 -0.4336 -14.0000 -0.3544 -12.0000 -0.2757 -10.0000 -0.1996 -8.0000 -0.1278 -6.0000 -0.0620 -4.0000 -0.0034 -2.0000 0.0474 0 0.0898 2.0000 0.1237 4.0000 0.1492 6.0000 0.1671 8.0000 0.1781 10.0000 0.1835 12.0000 0.1848 14.0000 0.1839 16.0000 0.1829 18.0000 0.1843 20.0000 0.1907 30.0000 -0.0001 40.0000 0.4658 50.0000 0.9087 60.0000 2.7566 70.0000 4.1489 80.0000 4.9260 90.0000 4.9619 100.0000 3.3846 110.0000 1.7154 120.0000 -0.0005 130.0000 -1.7144 140.0000 -3.3820 150.0000 -4.9578 160.0000 -4.9208 170.0000 -4.1432 180.0000 -2.7511 </LiftDueToAoA> <SideForceDueToSideslip scale="0.1"> -180.0000 0 -171.4977 0.3326 -154.4931 0.8516 -130.4378 1.4803 -100.5760 1.9598 -79.4240 2.0621 -63.6636 2.0724 -48.7327 2.0314 -30.4839 1.7361 -20.0000 1.3702 -18.0000 1.2471 -16.0000 1.1193 -14.0000 0.9873 -12.0000 0.8515 -10.0000 0.7125 -8.0000 0.5708 -6.0000 0.4269 -4.0000 0.2815 -2.0000 0.1349 0 -0.0121 2.0000 -0.1592 4.0000 -0.3057 6.0000 -0.4511 8.0000 -0.5949 10.0000 -0.7365 12.0000 -0.8755 14.0000 -1.0111 16.0000 -1.1431 18.0000 -1.2708 20.0000 -1.3937 30.4839 -1.7361 48.7327 -2.0314 63.6636 -2.0724 79.4240 -2.0621 100.5760 -1.9598 130.4378 -1.4803 154.4931 -0.8516 171.4977 -0.3326 180.0000 0 </SideForceDueToSideslip> <DragDueToAoA scale="0.1"> -180.0000 0.8000 -170.0000 0.8133 -160.0000 1.0119 -150.0000 2.2253 -140.0000 4.0787 -130.0000 6.4404 -120.0000 9.1441 -110.0000 9.8355 -100.0000 10.2580 -90.0000 10.4000 -80.0000 10.2581 -70.0000 9.8365 -60.0000 9.1465 -50.0000 6.4448 -40.0000 4.0856 -30.0000 2.2349 -20.0000 1.3727 -18.0000 1.2424 -16.0000 1.1396 -14.0000 1.0621 -12.0000 1.0077 -10.0000 0.9740 -8.0000 0.9582 -6.0000 0.9578 -4.0000 0.9700 -2.0000 0.9918 0 1.0203 2.0000 1.0528 4.0000 1.0862 6.0000 1.1179 8.0000 1.1450 10.0000 1.1650 12.0000 1.1754 14.0000 1.1739 16.0000 1.1583 18.0000 1.1268 20.0000 1.0776 30.0000 0.8000 40.0000 0.8133 50.0000 1.0119 60.0000 2.2253 70.0000 4.0787 80.0000 6.4404 90.0000 9.1441 100.0000 9.8355 110.0000 10.2580 120.0000 10.4000 130.0000 10.2581 140.0000 9.8365 150.0000 9.1465 160.0000 6.4448 170.0000 4.0856 180.0000 2.2349 </DragDueToAoA> <PitchingMomentDueToAoA scale="0.1" > -180.0000 -7.9390 -170.7661 -7.7714 -162.7016 -6.7996 -158.2661 -5.7272 -138.5081 6.8733 -130.4435 10.3251 -126.0081 11.0958 -118.7500 11.5315 -109.4758 11.7661 -99.7984 11.5315 -94.5565 10.8613 -65.5242 -6.6655 -60.0000 -7.7275 -51.8145 -8.2071 -39.7177 -8.3412 -30.8468 -8.1401 -20.0000 -7.7275 -18.0000 -7.3963 -16.0000 -7.0066 -14.0000 -6.5610 -12.0000 -6.0621 -10.0000 -5.5124 -8.0000 -4.9147 -6.0000 -4.2714 -4.0000 -3.5852 -2.0000 -2.8587 0 -2.0944 2.0000 -1.2951 4.0000 -0.4632 6.0000 0.3986 8.0000 1.2877 10.0000 2.2016 12.0000 3.1376 14.0000 4.0931 16.0000 5.0655 18.0000 6.0522 20.0000 7.0507 23.9919 8.5824 31.2500 9.8559 42.9435 11.0958 56.2500 11.4645 70.7661 11.6320 85.2823 11.5650 102.6210 11.0288 116.7339 9.8224 126.8145 7.9792 141.3306 4.4269 150.6048 1.3773 157.8629 -1.3036 163.1048 -3.6830 168.7500 -6.5650 172.3790 -7.6709 180.0000 -7.9390 </PitchingMomentDueToAoA> <YawingMomentDueToSideslip scale="0.1" > -180.0000 0 -170.0000 -4.0856 -159.9496 -6.8499 -145.2520 -9.5845 -133.8206 -9.8794 -123.1149 -9.6113 -111.8649 -7.9491 -100.2520 -4.8291 -88.9631 -1.1184 -78.5945 2.1930 -66.5668 5.0658 -53.8004 7.5302 -45.0907 8.9779 -38.7788 9.1447 -32.1429 8.7500 -25.5069 7.5029 -20.0000 6.1514 -18.0000 5.5362 -16.0000 4.9211 -14.0000 4.3060 -12.0000 3.6908 -10.0000 3.0757 -8.0000 2.4606 -6.0000 1.8454 -4.0000 1.2303 -2.0000 0.6151 0 0 2.0000 -0.6151 4.0000 -1.2303 6.0000 -1.8454 8.0000 -2.4606 10.0000 -3.0757 12.0000 -3.6908 14.0000 -4.3060 16.0000 -4.9211 18.0000 -5.5362 20.0000 -6.1514 25.5069 -7.5029 32.1429 -8.7500 38.7788 -9.1447 45.0907 -8.9779 53.8004 -7.5302 66.5668 -5.0658 78.5945 -2.1930 88.9631 1.1184 100.2520 4.8291 111.8649 7.9491 123.1149 9.6113 133.8206 9.8794 145.2520 9.5845 159.9496 6.8499 170.0000 4.0856 180.0000 0 </YawingMomentDueToSideslip> </Fuselage> <Engines> <Engine type="ConstantRPMEngine"> <DebugInfo printDebugInfo="false" /> <General inertia="5" /> <Performance maxPower="270" maxTorque="1000" rotationResistance="0.000009"/> <ControllerParams P="0.5" I="1.5" D="0.0" offset="150" targetRPM="5000" /> </Engine> </Engines> <DriveTrains> <DriveTrain type="GenericDriveTrain"> <GearBox gearRatios="1" reverseGearRatio="1" /> <Clutch maxClutchTorque="5000" /> <Engine index="0" /> <Load name="MainRotor" gearRatio="10.7" /> <Load name="TailRotor" gearRatio="1.739" /> </DriveTrain> </DriveTrains> <ControlSystem> <FCSComponent type="FCSAutoHoverTOH"> <YawController P="0.0" D="0"/> <PitchController P="0.15" D="0.05"/> <RollController P="0.15" D="0.05"/> </FCSComponent> <FCSComponent type="FCSHelicopterAutoTrim100" > <YawRateAndSideslipController printDebugInfo="false"> <YawRatePID P="0.18" I="0.02" D="0.0" offset="0.0" integralMin="-50" integralMax="50" /> <SideslipPID P="0.1" I="0.02" D="0.002" offset="0.0" integralMin="-50" integralMax="50" /> <Transition speedLow="10" speedHigh="20" /> <Maximums maxYawRate="30" maxSideslip="30" /> <InputMapping nonlinearity="1" /> </YawRateAndSideslipController> <PitchRateController printDebugInfo="false"> <PID P="0.02" I="0.04" D="0.001" offset="0.0" integralMin="-25" integralMax="25" /> <MaxPitchRate maxPitchRate="35" /> <InputMapping nonlinearity="1.5" /> </PitchRateController> <RollRateController printDebugInfo="false"> <PID P="0.02" I="0.04" D="0.001" offset="0.0" integralMin="-25" integralMax="25" /> <MaxRollRate maxRollRate="70" /> <InputMapping nonlinearity="1.5" /> </RollRateController> </FCSComponent> <FCSComponent type="FCSRotationDamper"> <YawController P="1" D="0"/> <PitchController P="1.0" D="0"/> <RollController P="0.2" D="0.00"/> </FCSComponent> </ControlSystem> <Rotors> <Rotor type="FGRotorBladeElementTheory"> <ModelConfiguration updateSubstepCount="360" /> <InfoPrint printControlInputs="false" printFlappingInfo="false" printOmega="false" /> <Geometry> <Position x="0.0" y="0.260" z="0.8720" /> <Tilt lateralTilt="0.0" longitudinalTilt="0" /> <Blades radius="4.165" chord="0.171" count="5" hingeOffset="0.128" flappingHingeLowerLimit="-5" flappingHingeHigherLimit="10" /> <Rotation clockwise="false" /> </Geometry> <MechanicalFeatures Ir="355" Ib="71" maxBrakeTorque="500" /> <AerodynamicFeatures> <DesignRPM rpm="467"/> <Blades twist="-9"> <LiftCoefficient> 0 0.4 0.6 0.8 1.0 5.0 -180 0.0 0.0 0.0 0.0 0.0 0.0 -176 0.5133 0.5133 0.5133 0.5133 0.5133 0.5133 -168 0.725 0.725 0.725 0.725 0.725 0.725 -160 0.665 0.665 0.665 0.665 0.665 0.665 -152 0.875 0.875 0.875 0.875 0.875 0.875 -144 0.8525 0.8525 0.8525 0.8525 0.8525 0.8525 -136 0.7225 0.7225 0.7225 0.7225 0.7225 0.7225 -128 0.5925 0.5925 0.5925 0.5925 0.5925 0.5925 -120 0.4625 0.4625 0.4625 0.4625 0.4625 0.4625 -112 0.3325 0.3325 0.3325 0.3325 0.3325 0.3325 -104 0.2025 0.2025 0.2025 0.2025 0.2025 0.2025 -96 0.0725 0.0725 0.0725 0.0725 0.0725 0.0725 -88 -0.0575 -0.0575 -0.0575 -0.0575 -0.0575 -0.0575 -80 -0.1875 -0.1875 -0.1875 -0.1875 -0.1875 -0.1875 -72 -0.3175 -0.3175 -0.3175 -0.3175 -0.3175 -0.3175 -64 -0.4475 -0.4475 -0.4475 -0.4475 -0.4475 -0.4475 -56 -0.5775 -0.5775 -0.5775 -0.5775 -0.5775 -0.5775 -48 -0.7075 -0.7075 -0.7075 -0.7075 -0.7075 -0.7075 -40 -0.8375 -0.8375 -0.8375 -0.8375 -0.8375 -0.8375 -32 -0.9675 -0.9675 -0.9675 -0.9675 -0.9675 -0.9675 -28 -0.996 -0.955 -0.946 -0.93 -0.918 -0.918 -24 -0.988 -0.962 -0.938 -0.89 -0.854 -0.854 -20 -0.98 -0.966 -0.93 -0.85 -0.79 -0.79 -16 -0.972 -0.970 -0.922 -0.81 -0.726 -0.726 -12 -0.724 -0.535 -0.66 -0.79 -0.662 -0.662 -8 -0.19 -0.3 -0.55 -0.75 -0.62 -0.62 -4 -0.45 -0.42 -0.47 -0.47 -0.425 -0.425 0 0.03 0.05 0.075 0.08 -0.05 -0.05 4 0.46 0.510 0.613 0.56 0.45 0.45 8 0.89 0.98 0.915 0.810 0.8 0.8 12 1.25 1.13 1.0 0.845 0.865 0.865 16 0.98 0.96 1.08 0.86 0.895 0.895 20 0.9856 0.9714 1.053 0.9 0.925 0.925 24 0.9912 0.9828 1.031 0.94 0.955 0.955 28 0.997 0.9942 1.01 0.98 0.985 0.985 32 0.9675 0.9675 0.9675 0.9675 0.9675 0.9675 40 0.8375 0.8375 0.8375 0.8375 0.8375 0.8375 48 0.7075 0.7075 0.7075 0.7075 0.7075 0.7075 56 0.5775 0.5775 0.5775 0.5775 0.5775 0.5775 64 0.4475 0.4475 0.4475 0.4475 0.4475 0.4475 72 0.3175 0.3175 0.3175 0.3175 0.3175 0.3175 80 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 88 0.0575 0.0575 0.0575 0.0575 0.0575 0.0575 96 -0.0725 -0.0725 -0.0725 -0.0725 -0.0725 -0.0725 104 -0.2025 -0.2025 -0.2025 -0.2025 -0.2025 -0.2025 112 -0.3325 -0.3325 -0.3325 -0.3325 -0.3325 -0.3325 120 -0.4625 -0.4625 -0.4625 -0.4625 -0.4625 -0.4625 128 -0.5925 -0.5925 -0.5925 -0.5925 -0.5925 -0.5925 136 -0.7225 -0.7225 -0.7225 -0.7225 -0.7225 -0.7225 144 -0.8525 -0.8525 -0.8525 -0.8525 -0.8525 -0.8525 152 -0.875 -0.875 -0.875 -0.875 -0.875 -0.875 160 -0.665 -0.665 -0.665 -0.665 -0.665 -0.665 168 -0.725 -0.725 -0.725 -0.725 -0.725 -0.725 176 -0.5133 -0.5133 -0.5133 -0.5133 -0.5133 -0.5133 180 0.0 0.0 0.0 0.0 0.0 0.0 </LiftCoefficient> <DragCoefficient > 0.0 0.4 0.6 0.8 1.0 5.0 -180 0 0 0 0 0 0 -176 0.733 0.733 0.733 0.733 0.733 0.733 -168 0.995 0.995 0.995 0.995 0.995 0.995 -160 0.84 0.84 0.84 0.84 0.84 0.84 -152 0.68 0.68 0.68 0.68 0.68 0.68 -144 0.7825 0.7825 0.7825 0.7825 0.7825 0.7825 -136 0.9762 0.9762 0.9762 0.9762 0.9762 0.9762 -128 1.1712 1.1712 1.1712 1.1712 1.1712 1.1712 -120 1.3662 1.3662 1.3662 1.3662 1.3662 1.3662 -112 1.561 1.561 1.561 1.561 1.561 1.561 -104 1.76 1.76 1.76 1.76 1.76 1.76 -96 1.952 1.952 1.952 1.952 1.952 1.952 -88 2.079 2.079 2.079 2.079 2.079 2.079 -80 2.086 2.086 2.086 2.086 2.086 2.086 -72 2.005 2.005 2.005 2.005 2.005 2.005 -64 1.826 1.826 1.826 1.826 1.826 1.826 -56 1.554 1.554 1.554 1.554 1.554 1.554 -48 1.262 1.262 1.262 1.262 1.262 1.262 -40 0.9725 0.9725 0.9725 0.9725 0.9725 0.9725 -32 0.6975 0.6975 0.6975 0.6975 0.6975 0.6975 -28 0.562 0.57 0.578 0.593 0.601 0.601 -24 0.417 0.448 0.469 0.52 0.543 0.543 -20 0.267 0.33 0.361 0.44 0.486 0.486 -16 0.12 0.208 0.285 0.364 0.428 0.428 -12 0.018 0.022 0.191 0.29 0.37 0.37 -8 0.008 0.009 0.07 0.16 0.248 0.248 -4 0.0075 0.008 0.0125 0.065 0.152 0.152 0 0.0075 0.008 0.008 0.017 0.09 0.09 4 0.0085 0.0085 0.011 0.09 0.1525 0.1525 8 0.011 0.014 0.073 0.17 0.249 0.249 12 0.026 0.098 0.179 0.285 0.37 0.37 16 0.23 0.23 0.283 0.361 0.428 0.428 20 0.345 0.345 0.358 0.435 0.486 0.486 24 0.455 0.455 0.467 0.508 0.543 0.543 28 0.56 0.56 0.576 0.583 0.601 0.601 32 0.6975 0.6975 0.6975 0.6975 0.6975 0.6975 40 0.9725 0.9725 0.9725 0.9725 0.9725 0.9725 48 1.2625 1.2625 1.2625 1.2625 1.2625 1.2625 56 1.554 1.554 1.554 1.554 1.554 1.554 64 1.826 1.826 1.826 1.826 1.826 1.826 72 2.005 2.005 2.005 2.005 2.005 2.005 80 2.086 2.086 2.086 2.086 2.086 2.086 88 2.079 2.079 2.079 2.079 2.079 2.079 96 1.9525 1.9525 1.9525 1.9525 1.9525 1.9525 104 1.76 1.76 1.76 1.76 1.76 1.76 112 1.5612 1.5612 1.5612 1.5612 1.5612 1.5612 120 1.366 1.366 1.366 1.366 1.366 1.366 128 1.171 1.171 1.171 1.171 1.171 1.171 136 0.976 0.976 0.976 0.976 0.976 0.976 144 0.7825 0.7825 0.7825 0.7825 0.7825 0.7825 152 0.68 0.68 0.68 0.68 0.68 0.68 160 0.84 0.84 0.84 0.84 0.84 0.84 168 0.996 0.996 0.996 0.996 0.996 0.996 176 0.733 0.733 0.733 0.733 0.733 0.733 180 0.0 0.0 0.0 0.0 0.0 0.0 </DragCoefficient> </Blades> <Controls A1UL="6.5" A1LL="-6.5" B1UL="13" B1LL="-13.0" thetaLL="8" thetaUL="17.3" useExtendedCollectiveRange="false" /> </AerodynamicFeatures> </Rotor> <Rotor type="FGRotorMomentumTheory"> <Geometry> <Position x="-0.1" y="-4.9460" z="-0.0080"/> <Tilt lateralTilt="-90.0" longitudinalTilt="0.0" /> <Blades radius="0.71" chord="0.050" count="2" hingeOffset="0.0" /> <Delta3 angle="0" /> </Geometry> <MechanicalFeatures Ir="0.35" Ib="0.027"/> <AerodynamicFeatures> <GroundEffect magnitude="0.1" /> <DesignRPM rpm="2874"/> <Blades liftCurveSlope="0.11" zeroLiftDragCoefficient="0.007" twist="-9.4" /> <Controls A1UL="0" A1LL="0" B1UL="0" B1LL="0" thetaLL="37" thetaUL="-37" useExtendedCollectiveRange="true"/> <Power inducedPowerCorrectionFactor="1.05" /> <DynamicPressureRatio> <Sideslip> -1000 0.91 -30 0.91 -25 0.80 -20 0.72 -15 0.65 -10 0.60 -5 0.58 0 0.56 5 0.58 10 0.60 15 0.65 20 0.72 25 0.80 30 0.91 1000 0.91 </Sideslip> </DynamicPressureRatio> <Inplanewash> <Low_a1 a1 ="-6"> -1000 0 0 0 10 -0.17 20 0.043 30 0.26 40 0.464 50 0.69 60 0.89 70 1.12 80 1.33 90 0.69 100 0 1000 0.86 </Low_a1> <Medium_a1 a1 ="0"> -1000 0 0 -0.34 10 -0.52 20 -0.17 30 0.10 40 0.31 50 0.52 60 0.71 70 0.91 80 1.12 90 0.57 100 0 1000 0 </Medium_a1> <High_a1 a1 ="6"> -1000 -0.48 0 -0.48 10 -0.69 20 -0.64 30 -0.27 40 0.03 50 0.27 60 0.52 70 0.74 80 0.96 90 0.46 100 0 </High_a1> </Inplanewash> <Downwash> <Low_a1 a1 ="-6"> -1000 -0.12 0 -0.12 10 0.71 20 1.60 30 1.62 40 1.66 50 1.67 60 1.67 70 1.73 80 1.50 90 1.26 100 1.01 1000 1.01 </Low_a1> <Medium_a1 a1 ="0"> -1000 0.36 0 0.36 10 0.84 20 1.64 30 1.70 40 1.76 50 1.82 60 1.85 70 1.90 80 1.68 90 1.44 100 1.20 1000 1.20 </Medium_a1> <High_a1 a1 ="6"> -1000 0.69 0 0.69 10 1.21 20 1.70 30 1.76 40 1.83 50 1.90 60 1.97 70 2.03 80 1.92 90 1.74 100 1.39 1000 1.39 </High_a1> </Downwash> </AerodynamicFeatures> </Rotor> </Rotors> <StabilizersAndWings> <HorizontalStabilizerRight> <Geometry> <Position x="1.8140" y="-4.9460" z="0.9800"/> <Up x="0.0" y="0.03489" z="0.9993908"/> <Front x="0" y="0.9993908" z="-0.03489"/> <SurfaceArea area="0.291028"/> </Geometry> <ControlResponse controlSurfaceLiftCoeffDerivative="0.0" controlSurfaceForceArmPos="0.0" /> <AerodynamicFeatures> <DynamicPressureRatio> <AoA> -1000 0.93 -30 0.93 -25 0.93 -20 0.88 -15 0.71 -10 0.71 -5 0.71 0 0.71 5 0.71 10 0.71 15 0.76 20 0.85 25 0.93 30 0.93 1000 0.93 </AoA> </DynamicPressureRatio> <MainRotorInplanewash> <Low_a1 a1 ="-6"> -1000 0 0 0 10 -0.18 20 0.04 30 0.26 40 0.47 50 0.70 60 0.91 70 1.14 80 1.36 90 0.70 100 0 1000 0 </Low_a1> <Medium_a1 a1 ="0"> -1000 -0.35 0 -0.35 10 -0.53 20 -0.18 30 0.11 40 0.32 50 0.53 60 0.73 70 0.93 80 1.14 90 0.58 100 0 1000 0 </Medium_a1> <High_a1 a1 ="6"> -1000 -0.49 0 -0.49 10 -0.70 20 -0.65 30 -0.28 40 0.03 50 0.28 60 0.53 70 0.76 80 0.99 90 0.47 100 0 1000 0 </High_a1> </MainRotorInplanewash> <MainRotorDownwash> <Low_a1 a1 ="-6"> -1000 -0.12 0 -0.12 10 0.74 20 1.66 30 1.67 40 1.71 50 1.73 60 1.76 70 1.78 80 1.55 90 1.30 100 1.05 1000 1.05 </Low_a1> <Medium_a1 a1 ="0"> -1000 0.37 0 0.37 10 0.86 20 1.69 30 1.76 40 1.82 50 1.88 60 1.91 70 1.97 80 1.74 90 1.49 100 1.24 1000 1.24 </Medium_a1> <High_a1 a1 ="6"> -1000 0.72 0 0.72 10 1.25 20 1.76 30 1.82 40 1.89 50 1.97 60 2.03 70 2.10 80 1.99 90 1.80 100 1.43 1000 1.43 </High_a1> </MainRotorDownwash> <GroundEffect startDistance="1.6" strength="0.0"/> <LiftCurve> -1000 0 -180 0 -150 0.61 -140 0.69 -130 0.69 -120 0.61 -110 0.46 -100 0.24 -90 0 -80 -0.24 -70 -0.46 -60 -0.61 -50 -0.69 -40 -0.69 -30 -0.61 0 0 30 0.61 40 0.69 50 0.69 60 0.61 70 0.46 80 0.24 90 0 100 -0.24 110 -0.46 120 -0.61 130 -0.69 140 -0.69 150 -0.61 180 0 1000 0 </LiftCurve> <DragCurve > -1000 0.0 -180 0.0 -140 0.42 -130 0.56 -120 0.71 -110 0.84 -100 0.93 -90 0.96 -80 0.93 -70 0.84 -60 0.71 -50 0.56 -40 0.42 0 0.008 40 0.42 50 0.56 60 0.71 70 0.84 80 0.93 90 0.96 100 0.93 110 0.84 120 0.71 130 0.56 140 0.42 180 0.0 1000 0.0 </DragCurve> </AerodynamicFeatures> </HorizontalStabilizerRight> <HorizontalStabilizerLeft copy="HorizontalStabilizerRight"> <Geometry> <Position x="-1.8140" /> </Geometry> </HorizontalStabilizerLeft> <VerticalStabilizer> <Geometry> <Position x="0" y="-4.778" z="0.1340"/> <Up x="-1.0" y="0.0" z="0"/> <Front x="0" y="1.0" z="0"/> <SurfaceArea area="0.59"/> </Geometry> <ControlResponse controlSurfaceLiftCoeffDerivative="0.0" controlSurfaceForceArmPos="0.0" /> <AerodynamicFeatures> <DynamicPressureRatio> <Sideslip> -1000 0.95 -30 0.95 -25 0.84 -20 0.75 -15 0.68 -10 0.63 -5 0.61 0 0.59 5 0.61 10 0.63 15 0.68 20 0.75 25 0.84 30 0.95 1000 0.95 </Sideslip> </DynamicPressureRatio> <MainRotorInplanewash> <Low_a1 a1 ="-6"> -1000 0 0 0 10 -0.18 20 0.04 30 0.27 40 0.49 50 0.73 60 0.95 70 1.18 80 1.41 90 0.73 100 0 1000 0 </Low_a1> <Medium_a1 a1 ="0"> -1000 -0.36 0 -0.36 10 -0.55 20 -0.18 30 0.11 40 0.33 50 0.55 60 0.75 70 0.96 80 1.18 90 0.60 100 0 </Medium_a1> <High_a1 a1 ="6"> -1000 -0.51 0 -0.51 10 -0.73 20 -0.67 30 -0.29 40 0.04 50 0.29 60 0.55 70 0.78 80 1.02 90 0.49 100 0 1000 0 </High_a1> </MainRotorInplanewash> <MainRotorDownwash> <Low_a1 a1 ="-6"> -1000 -0.12 0 -0.12 10 0.74 20 1.67 30 1.69 40 1.73 50 1.75 60 1.78 70 1.80 80 1.57 90 1.32 100 1.06 1000 1.06 </Low_a1> <Medium_a1 a1 ="0"> -1000 0.37 0 0.37 10 0.87 20 1.71 30 1.78 40 1.84 50 1.90 60 1.93 70 1.99 80 1.76 90 1.51 100 1.26 1000 1.26 </Medium_a1> <High_a1 a1 ="6"> -1000 0.72 0 0.72 10 1.26 20 1.78 30 1.84 40 1.92 50 1.99 60 2.05 70 2.12 80 2.01 90 1.82 100 1.45 1000 1.45 </High_a1> </MainRotorDownwash> <GroundEffect startDistance="0" strength="0.0"/> <LiftCurve > -180 0 -170 0.34 -160 0.74 -150 0.80 -140 0.72 -130 0.57 -120 0.43 -110 0.29 -100 0.15 -90 0 -80 -0.15 -70 -0.29 -60 -0.43 -50 -0.57 -40 -0.72 -30 -0.80 -25 -0.80 -20 -0.74 0 0 20 0.74 25 0.80 30 0.80 40 0.72 50 0.57 60 0.43 70 0.29 80 0.15 90 0 100 -0.15 110 -0.29 120 -0.43 130 -0.57 140 -0.72 150 -0.80 160 -0.74 170 -0.34 180 0 </LiftCurve> <DragCurve> -1000 0.0 -180 0.0 -140 0.42 -130 0.56 -120 0.71 -110 0.84 -100 0.93 -90 0.96 -80 0.93 -70 0.84 -60 0.71 -50 0.56 -40 0.42 0 0.008 40 0.42 50 0.56 60 0.71 70 0.84 80 0.93 90 0.96 100 0.93 110 0.84 120 0.71 130 0.56 140 0.42 180 0.0 1000 0.0 </DragCurve> </AerodynamicFeatures> </VerticalStabilizer> </StabilizersAndWings> <GroundContacts> <GeneralConfiguration gearExtensionTime="3" gearDragCoefficient="0" gearReferenceArea="0" maxSteerableGearDeflection="80" steerableGearSpeedCorrectionFactor="0.0"/> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="-1.052" y="1.6933" z="-1.6717"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="1.052" y="1.6933" z="-1.6717"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="0.944" y="-0.6387" z="-1.5650"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="-0.944" y="-0.6387" z="-1.5650"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="0" y="-4.341" z="-0.65"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0" /> </Suspension> <Wheel mass="0.1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> </GroundContacts> </GenHeli600> Edited November 4, 2011 by Foxhound Please put long configs etc like this between spoiler tags preventing the topic from becoming a mile long. Share this post Link to post Share on other sites
heli_flying 10 Posted November 4, 2011 many thanks ;) i can edit this file but eliteness dont let me reconvert the pbo file just show the message "No sqm or config detected pbo" when i try to convert the folder air_us_h :( Share this post Link to post Share on other sites
LeftSkidLow 1 Posted November 4, 2011 Hmm I'm not sure, I haven't tried to create a pbo yet, I've only extracted them. Have you tried any of the other PBO tools? Share this post Link to post Share on other sites
tnprvteye 10 Posted November 4, 2011 What tool are you using to extract them? The ones I've tried don't work. Share this post Link to post Share on other sites
LeftSkidLow 1 Posted November 4, 2011 I used the eliteness and I think I had to download a depbo.dll and stick in the same folder as eliteness. With eliteness, you will get errors if you don't run the exe as administrator in Windows 7. I got the files on one of those overly complicated dev-heaven sites where you have to read the page 4 times over to find the DL link. Share this post Link to post Share on other sites
tnprvteye 10 Posted November 4, 2011 Excellent, I'll start the hunt... Share this post Link to post Share on other sites
heli_flying 10 Posted November 4, 2011 i tried with pboview but no extract nothing just say "no arma pbo", i find collective maximum and minimum values, the minimum value is to high 8 degrees this is the reason this one is almost unable to auto rotate and no decent faster when the collective is in full down position, normal values in a real helicopter are around zero o even negatives values in asymmetrical foil blades but in the other hand if with 8 degrees you just need add weight and this is able to auto rotate mean the rotors flight dynamics are amazing!! Share this post Link to post Share on other sites
heli_flying 10 Posted November 5, 2011 i need repack to see the changes? i am totally new with this game thanks ;) Share this post Link to post Share on other sites
memphisbelle 99 Posted November 5, 2011 (edited) Hello, i need repack to see the changes? i am totally new with this game thanks ;) Yes, you need to repack the files as pbo to get them running ingame. To repack PBO files I recommend either kegeteys CPBO (scroll down to the section ArmA tools), which actually is just packing all the files in a bag and gives it the filetype PBO, or the more professional one, which is by that binarizing the Configs (so recommended for a final release packing). This tool is called BinPBO and is part of the BITools2. To extract pbo´s I recommend Micero´s ExtractPbp application, to find on dev-heaven.net You´ll find a detailed information about how extract them by following this link. Just scroll down to the option: Extract BI addons to P: . Good luck Edited November 5, 2011 by MemphisBelle Share this post Link to post Share on other sites
heli_flying 10 Posted November 5, 2011 thank you so much :) i can make a working pbo now Share this post Link to post Share on other sites
heli_flying 10 Posted November 7, 2011 (edited) this appears to be lift vs angle of attack but why in columns? what mean this columns? 0, 0.4, 0.6.... :rolleyes:reynolds number:confused: <AerodynamicFeatures> <DesignRPM rpm="467"/> <Blades twist="-9"> <LiftCoefficient> 0 0.4 0.6 0.8 1.0 5.0 -180 0.0 0.0 0.0 0.0 0.0 0.0 -176 0.5133 0.5133 0.5133 0.5133 0.5133 0.5133 -168 0.725 0.725 0.725 0.725 0.725 0.725 -160 0.665 0.665 0.665 0.665 0.665 0.665 -152 0.875 0.875 0.875 0.875 0.875 0.875 -144 0.8525 0.8525 0.8525 0.8525 0.8525 0.8525 -136 0.7225 0.7225 0.7225 0.7225 0.7225 0.7225 -128 0.5925 0.5925 0.5925 0.5925 0.5925 0.5925 -120 0.4625 0.4625 0.4625 0.4625 0.4625 0.4625 -112 0.3325 0.3325 0.3325 0.3325 0.3325 0.3325 -104 0.2025 0.2025 0.2025 0.2025 0.2025 0.2025 -96 0.0725 0.0725 0.0725 0.0725 0.0725 0.0725 -88 -0.0575 -0.0575 -0.0575 -0.0575 -0.0575 -0.0575 -80 -0.1875 -0.1875 -0.1875 -0.1875 -0.1875 -0.1875 -72 -0.3175 -0.3175 -0.3175 -0.3175 -0.3175 -0.3175 -64 -0.4475 -0.4475 -0.4475 -0.4475 -0.4475 -0.4475 -56 -0.5775 -0.5775 -0.5775 -0.5775 -0.5775 -0.5775 -48 -0.7075 -0.7075 -0.7075 -0.7075 -0.7075 -0.7075 -40 -0.8375 -0.8375 -0.8375 -0.8375 -0.8375 -0.8375 -32 -0.9675 -0.9675 -0.9675 -0.9675 -0.9675 -0.9675 -28 -0.996 -0.955 -0.946 -0.93 -0.918 -0.918 -24 -0.988 -0.962 -0.938 -0.89 -0.854 -0.854 -20 -0.98 -0.966 -0.93 -0.85 -0.79 -0.79 -16 -0.972 -0.970 -0.922 -0.81 -0.726 -0.726 -12 -0.724 -0.535 -0.66 -0.79 -0.662 -0.662 -8 -0.19 -0.3 -0.55 -0.75 -0.62 -0.62 -4 -0.45 -0.42 -0.47 -0.47 -0.425 -0.425 0 0.03 0.05 0.075 0.08 -0.05 -0.05 4 0.46 0.510 0.613 0.56 0.45 0.45 8 0.89 0.98 0.915 0.810 0.8 0.8 12 1.25 1.13 1.0 0.845 0.865 0.865 16 0.98 0.96 1.08 0.86 0.895 0.895 20 0.9856 0.9714 1.053 0.9 0.925 0.925 24 0.9912 0.9828 1.031 0.94 0.955 0.955 28 0.997 0.9942 1.01 0.98 0.985 0.985 32 0.9675 0.9675 0.9675 0.9675 0.9675 0.9675 40 0.8375 0.8375 0.8375 0.8375 0.8375 0.8375 48 0.7075 0.7075 0.7075 0.7075 0.7075 0.7075 56 0.5775 0.5775 0.5775 0.5775 0.5775 0.5775 64 0.4475 0.4475 0.4475 0.4475 0.4475 0.4475 72 0.3175 0.3175 0.3175 0.3175 0.3175 0.3175 80 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 88 0.0575 0.0575 0.0575 0.0575 0.0575 0.0575 96 -0.0725 -0.0725 -0.0725 -0.0725 -0.0725 -0.0725 104 -0.2025 -0.2025 -0.2025 -0.2025 -0.2025 -0.2025 112 -0.3325 -0.3325 -0.3325 -0.3325 -0.3325 -0.3325 120 -0.4625 -0.4625 -0.4625 -0.4625 -0.4625 -0.4625 128 -0.5925 -0.5925 -0.5925 -0.5925 -0.5925 -0.5925 136 -0.7225 -0.7225 -0.7225 -0.7225 -0.7225 -0.7225 144 -0.8525 -0.8525 -0.8525 -0.8525 -0.8525 -0.8525 152 -0.875 -0.875 -0.875 -0.875 -0.875 -0.875 160 -0.665 -0.665 -0.665 -0.665 -0.665 -0.665 168 -0.725 -0.725 -0.725 -0.725 -0.725 -0.725 176 -0.5133 -0.5133 -0.5133 -0.5133 -0.5133 -0.5133 180 0.0 0.0 0.0 0.0 0.0 0.0 Edited November 7, 2011 by heli_flying Share this post Link to post Share on other sites
armored_sheep 56 Posted November 10, 2011 (edited) I have something that might help real pilots to disable what they probably call "lag on joystick". As there is actualy no real pilot available in BI, pls try this and provide your feedback: Remove or replace such entry in your testing XML. If my findings are good, this should remove all stability agumentation build in RLib: <FCSComponent type="FCSRotationDamper"> <YawController P="0" D="0"/> <PitchController P="0" D="0"/> <RollController P="0" D="0"/> </FCSComponent> From my personal tests, values for this "Damper" do slow responses simillar way as stability agumentation slider in X-Plane or stability "autopilot" chanels in Black Shark. Edited November 10, 2011 by Armored_Sheep Share this post Link to post Share on other sites
armored_sheep 56 Posted November 10, 2011 Anyone who want to test settings with removed FCSRotationDamper values can try thise XML file. Just unpack it in your TKOH folder on root next to the exe. Share this post Link to post Share on other sites
sickboy 13 Posted November 10, 2011 Editing the FM - related; http://forums.bistudio.com/showthread.php?t=127308 Share this post Link to post Share on other sites
-DirTyDeeDs--Ziggy- 0 Posted November 10, 2011 (edited) what is the difference with Light-GenHeli600-DesktopSim.xml and Light-GenHeli400-DesktopSim.xml ? is that armed and unarmed heli ? Just unpack it in your TKOH folder on root next to the exe. oh? so am I to understand that placing this addon in the root folder overrides the data in the Addons folder? that would help play testing changes and reduce the chance of corrupting the original addon. Edited November 10, 2011 by [DirTyDeeDs]-Ziggy- Share this post Link to post Share on other sites
armored_sheep 56 Posted November 10, 2011 -Ziggy-;2054788']what is the difference with Light-GenHeli600-DesktopSim.xml and Light-GenHeli400-DesktopSim.xml ? 400 is training helicopter that has less powerfull engine -Ziggy-;2054788'] placing this addon in the root folder overrides the data in the Addons folder? yes, exactly Share this post Link to post Share on other sites
armored_sheep 56 Posted November 10, 2011 (edited) Attached complete pack of XML files for all helicopters. Dampeners at least for yaw control cannot be set to 0 as it brakes autotrim. More investigation is needed at the controlers part of the XML. Edited November 10, 2011 by Armored_Sheep Share this post Link to post Share on other sites
jedra 11 Posted November 10, 2011 I noticed that with this change and auto-trim on (in the light heli), it takes a few seconds for auto-trim to kick-in. You get about 4-5 seconds of occillation before it bites. Other than that, I need to test a bit more to see if handling is affected - unfortunately I have a big problem controlling my heli without auto trim on and I guess the biggest benefit of the change is in that mode. Share this post Link to post Share on other sites
grant977 10 Posted November 11, 2011 Not sure how to properly apply this can sombody help? Share this post Link to post Share on other sites
heli_flying 10 Posted November 11, 2011 i think this one can do the job for the light in expert without auto trim but push your left pedal starting in freeflight mode!! REFERENCES [1] Technical Description.pdf [2] Wikipedia [3] Field manual [4] Technical manual [5] Blueprints --> <?xml version="1.0"?> <GenHeli600 version="1.0"> <!-- Estimation Calculated after the ration R_mass = (empty weight of dauphin) / (empty weight of MD500) ratio = (2271)/(722) = 3.1454293629. Ixx = 11000/R_Mass = 3497 Iyy = 2704/R_Mass = 859 Ixx = 9900/R_Mass = 3147 --> <MomentsOfInertia Ixx="3497" Iyy="859" Izz="3147"/> <!--[2] Empty Weight=722 kg Max Takeoff Weight=1610 kg Any value between empty weight and max takeoff weight is valid. --> <Mass mass="722"/> <Fuselage rotationalResistance="100" > <MainRotorDownwash scale="0.5"> <Low_a1 a1 ="-6"> 0 1.4958 10.0000 1.4955 20.0000 1.4939 30.0000 1.4881 40.0000 1.4694 50.0000 1.4149 60.0000 1.2801 70.0000 1.0072 80.0000 0.5652 90.0000 0.0000 </Low_a1> <Medium_a1 a1 ="0" scale="0.5"> 0 1.4958 10.0000 1.4955 20.0000 1.4939 30.0000 1.4881 40.0000 1.4694 50.0000 1.4149 60.0000 1.2801 70.0000 1.0072 80.0000 0.5652 90.0000 0.0000 </Medium_a1> <High_a1 a1 ="6" scale="0.5"> 0 1.4958 10.0000 1.4955 20.0000 1.4939 30.0000 1.4881 40.0000 1.4694 50.0000 1.4149 60.0000 1.2801 70.0000 1.0072 80.0000 0.5652 90.0000 0.0000 </High_a1> </MainRotorDownwash> <MainRotorInplanewash scale="0.5"> <Low_a1 a1 ="-6"> 0 0.1124 10.0000 0.1125 20.0000 0.1127 30.0000 0.1138 40.0000 0.1176 50.0000 0.1333 60.0000 0.2000 70.0000 0.4472 80.0000 1.0415 90.0000 1.5000 </Low_a1> <Medium_a1 a1 ="0" scale="0.5"> 0 0.1124 10.0000 0.1125 20.0000 0.1127 30.0000 0.1138 40.0000 0.1176 50.0000 0.1333 60.0000 0.2000 70.0000 0.4472 80.0000 1.0415 90.0000 1.5000 </Medium_a1> <High_a1 a1 ="6" scale="0.5"> 0 0.1124 10.0000 0.1125 20.0000 0.1127 30.0000 0.1138 40.0000 0.1176 50.0000 0.1333 60.0000 0.2000 70.0000 0.4472 80.0000 1.0415 90.0000 1.5000 </High_a1> </MainRotorInplanewash> <LiftDueToAoA scale="0.1"> -180.0000 -0.0001 -170.0000 0.4658 -160.0000 0.9087 -150.0000 2.7566 -140.0000 4.1489 -130.0000 4.9260 -120.0000 4.9619 -110.0000 3.3846 -100.0000 1.7154 -90.0000 -0.0005 -80.0000 -1.7144 -70.0000 -3.3820 -60.0000 -4.9578 -50.0000 -4.9208 -40.0000 -4.1432 -30.0000 -2.7511 -20.0000 -0.5829 -18.0000 -0.5107 -16.0000 -0.4336 -14.0000 -0.3544 -12.0000 -0.2757 -10.0000 -0.1996 -8.0000 -0.1278 -6.0000 -0.0620 -4.0000 -0.0034 -2.0000 0.0474 0 0.0898 2.0000 0.1237 4.0000 0.1492 6.0000 0.1671 8.0000 0.1781 10.0000 0.1835 12.0000 0.1848 14.0000 0.1839 16.0000 0.1829 18.0000 0.1843 20.0000 0.1907 30.0000 -0.0001 40.0000 0.4658 50.0000 0.9087 60.0000 2.7566 70.0000 4.1489 80.0000 4.9260 90.0000 4.9619 100.0000 3.3846 110.0000 1.7154 120.0000 -0.0005 130.0000 -1.7144 140.0000 -3.3820 150.0000 -4.9578 160.0000 -4.9208 170.0000 -4.1432 180.0000 -2.7511 </LiftDueToAoA> <SideForceDueToSideslip scale="0.1"> -180.0000 0 -171.4977 0.3326 -154.4931 0.8516 -130.4378 1.4803 -100.5760 1.9598 -79.4240 2.0621 -63.6636 2.0724 -48.7327 2.0314 -30.4839 1.7361 -20.0000 1.3702 -18.0000 1.2471 -16.0000 1.1193 -14.0000 0.9873 -12.0000 0.8515 -10.0000 0.7125 -8.0000 0.5708 -6.0000 0.4269 -4.0000 0.2815 -2.0000 0.1349 0 -0.0121 2.0000 -0.1592 4.0000 -0.3057 6.0000 -0.4511 8.0000 -0.5949 10.0000 -0.7365 12.0000 -0.8755 14.0000 -1.0111 16.0000 -1.1431 18.0000 -1.2708 20.0000 -1.3937 30.4839 -1.7361 48.7327 -2.0314 63.6636 -2.0724 79.4240 -2.0621 100.5760 -1.9598 130.4378 -1.4803 154.4931 -0.8516 171.4977 -0.3326 180.0000 0 </SideForceDueToSideslip> <DragDueToAoA scale="0.1"> -180.0000 0.8000 -170.0000 0.8133 -160.0000 1.0119 -150.0000 2.2253 -140.0000 4.0787 -130.0000 6.4404 -120.0000 9.1441 -110.0000 9.8355 -100.0000 10.2580 -90.0000 10.4000 -80.0000 10.2581 -70.0000 9.8365 -60.0000 9.1465 -50.0000 6.4448 -40.0000 4.0856 -30.0000 2.2349 -20.0000 1.3727 -18.0000 1.2424 -16.0000 1.1396 -14.0000 1.0621 -12.0000 1.0077 -10.0000 0.9740 -8.0000 0.9582 -6.0000 0.9578 -4.0000 0.9700 -2.0000 0.9918 0 1.0203 2.0000 1.0528 4.0000 1.0862 6.0000 1.1179 8.0000 1.1450 10.0000 1.1650 12.0000 1.1754 14.0000 1.1739 16.0000 1.1583 18.0000 1.1268 20.0000 1.0776 30.0000 0.8000 40.0000 0.8133 50.0000 1.0119 60.0000 2.2253 70.0000 4.0787 80.0000 6.4404 90.0000 9.1441 100.0000 9.8355 110.0000 10.2580 120.0000 10.4000 130.0000 10.2581 140.0000 9.8365 150.0000 9.1465 160.0000 6.4448 170.0000 4.0856 180.0000 2.2349 </DragDueToAoA> <PitchingMomentDueToAoA scale="0.1" > -180.0000 -7.9390 -170.7661 -7.7714 -162.7016 -6.7996 -158.2661 -5.7272 -138.5081 6.8733 -130.4435 10.3251 -126.0081 11.0958 -118.7500 11.5315 -109.4758 11.7661 -99.7984 11.5315 -94.5565 10.8613 -65.5242 -6.6655 -60.0000 -7.7275 -51.8145 -8.2071 -39.7177 -8.3412 -30.8468 -8.1401 -20.0000 -7.7275 -18.0000 -7.3963 -16.0000 -7.0066 -14.0000 -6.5610 -12.0000 -6.0621 -10.0000 -5.5124 -8.0000 -4.9147 -6.0000 -4.2714 -4.0000 -3.5852 -2.0000 -2.8587 0 -2.0944 2.0000 -1.2951 4.0000 -0.4632 6.0000 0.3986 8.0000 1.2877 10.0000 2.2016 12.0000 3.1376 14.0000 4.0931 16.0000 5.0655 18.0000 6.0522 20.0000 7.0507 23.9919 8.5824 31.2500 9.8559 42.9435 11.0958 56.2500 11.4645 70.7661 11.6320 85.2823 11.5650 102.6210 11.0288 116.7339 9.8224 126.8145 7.9792 141.3306 4.4269 150.6048 1.3773 157.8629 -1.3036 163.1048 -3.6830 168.7500 -6.5650 172.3790 -7.6709 180.0000 -7.9390 </PitchingMomentDueToAoA> <YawingMomentDueToSideslip scale="0.1" > -180.0000 0 -170.0000 -4.0856 -159.9496 -6.8499 -145.2520 -9.5845 -133.8206 -9.8794 -123.1149 -9.6113 -111.8649 -7.9491 -100.2520 -4.8291 -88.9631 -1.1184 -78.5945 2.1930 -66.5668 5.0658 -53.8004 7.5302 -45.0907 8.9779 -38.7788 9.1447 -32.1429 8.7500 -25.5069 7.5029 -20.0000 6.1514 -18.0000 5.5362 -16.0000 4.9211 -14.0000 4.3060 -12.0000 3.6908 -10.0000 3.0757 -8.0000 2.4606 -6.0000 1.8454 -4.0000 1.2303 -2.0000 0.6151 0 0 2.0000 -0.6151 4.0000 -1.2303 6.0000 -1.8454 8.0000 -2.4606 10.0000 -3.0757 12.0000 -3.6908 14.0000 -4.3060 16.0000 -4.9211 18.0000 -5.5362 20.0000 -6.1514 25.5069 -7.5029 32.1429 -8.7500 38.7788 -9.1447 45.0907 -8.9779 53.8004 -7.5302 66.5668 -5.0658 78.5945 -2.1930 88.9631 1.1184 100.2520 4.8291 111.8649 7.9491 123.1149 9.6113 133.8206 9.8794 145.2520 9.5845 159.9496 6.8499 170.0000 4.0856 180.0000 0 </YawingMomentDueToSideslip> </Fuselage> <Engines> <Engine type="ConstantRPMEngine"> <DebugInfo printDebugInfo="false" /> <General inertia="6" /> <Performance maxPower="375" maxTorque="1000" rotationResistance="0.000000009"/> <ControllerParams P="0.5" I="1.5" D="0.0" offset="150" targetRPM="5000" /> </Engine> </Engines> <DriveTrains> <DriveTrain type="GenericDriveTrain"> <GearBox gearRatios="1" reverseGearRatio="1" /> <Clutch maxClutchTorque="5000" /> <Engine index="0" /> <Load name="MainRotor" gearRatio="10.0" /> <Load name="TailRotor" gearRatio="1.739" /> </DriveTrain> </DriveTrains> <ControlSystem> <FCSComponent type="FCSAutoHoverTOH"> <YawController P="0.0" D="0"/> <PitchController P="0.15" D="0.05"/> <RollController P="0.15" D="0.05"/> </FCSComponent> <FCSComponent type="FCSHelicopterAutoTrim100" > <YawRateAndSideslipController printDebugInfo="false"> <YawRatePID P="0.18" I="0.02" D="0.0" offset="0.0" integralMin="-50" integralMax="50" /> <SideslipPID P="0.1" I="0.02" D="0.002" offset="0.0" integralMin="-50" integralMax="50" /> <Transition speedLow="10" speedHigh="20" /> <Maximums maxYawRate="30" maxSideslip="30" /> <InputMapping nonlinearity="1" /> </YawRateAndSideslipController> <PitchRateController printDebugInfo="false"> <PID P="0.02" I="0.04" D="0.001" offset="0.0" integralMin="-25" integralMax="25" /> <MaxPitchRate maxPitchRate="35" /> <InputMapping nonlinearity="1.5" /> </PitchRateController> <RollRateController printDebugInfo="false"> <PID P="0.02" I="0.04" D="0.001" offset="0.0" integralMin="-25" integralMax="25" /> <MaxRollRate maxRollRate="70" /> <InputMapping nonlinearity="1.5" /> </RollRateController> </FCSComponent> <FCSComponent type="FCSRotationDamper"> <YawController P="0" D="0"/> <PitchController P="0.0" D="0"/> <RollController P="0.0" D="0.00"/> </FCSComponent> </ControlSystem> <Rotors> <Rotor type="FGRotorBladeElementTheory"> <ModelConfiguration updateSubstepCount="360" /> <InfoPrint printControlInputs="false" printFlappingInfo="false" printOmega="false" /> <Geometry> <Position x="0.0" y="0.260" z="0.8720" /> <Tilt lateralTilt="0.0" longitudinalTilt="0" /> <Blades radius="4.165" chord="0.171" count="5" hingeOffset="0.128" flappingHingeLowerLimit="-2" flappingHingeHigherLimit="20" /> <Rotation clockwise="false" /> </Geometry> <MechanicalFeatures Ir="155" Ib="220" maxBrakeTorque="500" /> <AerodynamicFeatures> <DesignRPM rpm="503"/> <Blades twist="-7"> <LiftCoefficient> 0 0.4 0.6 0.8 1.0 5.0 -180 0.0 0.0 0.0 0.0 0.0 0.0 -176 0.5133 0.5133 0.5133 0.5133 0.5133 0.5133 -168 0.725 0.725 0.725 0.725 0.725 0.725 -160 0.665 0.665 0.665 0.665 0.665 0.665 -152 0.875 0.875 0.875 0.875 0.875 0.875 -144 0.8525 0.8525 0.8525 0.8525 0.8525 0.8525 -136 0.7225 0.7225 0.7225 0.7225 0.7225 0.7225 -128 0.5925 0.5925 0.5925 0.5925 0.5925 0.5925 -120 0.4625 0.4625 0.4625 0.4625 0.4625 0.4625 -112 0.3325 0.3325 0.3325 0.3325 0.3325 0.3325 -104 0.2025 0.2025 0.2025 0.2025 0.2025 0.2025 -96 0.0725 0.0725 0.0725 0.0725 0.0725 0.0725 -88 -0.0575 -0.0575 -0.0575 -0.0575 -0.0575 -0.0575 -80 -0.1875 -0.1875 -0.1875 -0.1875 -0.1875 -0.1875 -72 -0.3175 -0.3175 -0.3175 -0.3175 -0.3175 -0.3175 -64 -0.4475 -0.4475 -0.4475 -0.4475 -0.4475 -0.4475 -56 -0.5775 -0.5775 -0.5775 -0.5775 -0.5775 -0.5775 -48 -0.7075 -0.7075 -0.7075 -0.7075 -0.7075 -0.7075 -40 -0.8375 -0.8375 -0.8375 -0.8375 -0.8375 -0.8375 -32 -0.9675 -0.9675 -0.9675 -0.9675 -0.9675 -0.9675 -28 -0.996 -0.955 -0.946 -0.93 -0.918 -0.918 -24 -0.988 -0.962 -0.938 -0.89 -0.854 -0.854 -20 -0.98 -0.966 -0.93 -0.85 -0.79 -0.79 -16 -0.982 -0.970 -0.922 -0.81 -0.726 -0.726 -12 -0.95 -1.235 -0.66 -0.79 -0.662 -0.662 -8 -0.89 -0.8 -0.55 -0.75 -0.62 -0.62 -4 -0.46 -0.46 -0.47 -0.47 -0.425 -0.425 0 0.00 0.05 0.075 0.08 -0.05 -0.05 4 0.46 0.510 0.613 0.56 0.45 0.45 8 0.89 0.98 0.915 0.810 0.8 0.8 12 1.25 1.23 1.0 0.845 0.865 0.865 16 0.98 0.96 1.08 0.86 0.895 0.895 20 0.9856 0.9714 1.053 0.9 0.925 0.925 24 0.9912 0.9828 1.031 0.94 0.955 0.955 28 0.997 0.9942 1.01 0.98 0.985 0.985 32 0.9675 0.9675 0.9675 0.9675 0.9675 0.9675 40 0.8375 0.8375 0.8375 0.8375 0.8375 0.8375 48 0.7075 0.7075 0.7075 0.7075 0.7075 0.7075 56 0.5775 0.5775 0.5775 0.5775 0.5775 0.5775 64 0.4475 0.4475 0.4475 0.4475 0.4475 0.4475 72 0.3175 0.3175 0.3175 0.3175 0.3175 0.3175 80 0.1875 0.1875 0.1875 0.1875 0.1875 0.1875 88 0.0575 0.0575 0.0575 0.0575 0.0575 0.0575 96 -0.0725 -0.0725 -0.0725 -0.0725 -0.0725 -0.0725 104 -0.2025 -0.2025 -0.2025 -0.2025 -0.2025 -0.2025 112 -0.3325 -0.3325 -0.3325 -0.3325 -0.3325 -0.3325 120 -0.4625 -0.4625 -0.4625 -0.4625 -0.4625 -0.4625 128 -0.5925 -0.5925 -0.5925 -0.5925 -0.5925 -0.5925 136 -0.7225 -0.7225 -0.7225 -0.7225 -0.7225 -0.7225 144 -0.8525 -0.8525 -0.8525 -0.8525 -0.8525 -0.8525 152 -0.875 -0.875 -0.875 -0.875 -0.875 -0.875 160 -0.665 -0.665 -0.665 -0.665 -0.665 -0.665 168 -0.725 -0.725 -0.725 -0.725 -0.725 -0.725 176 -0.5133 -0.5133 -0.5133 -0.5133 -0.5133 -0.5133 180 0.0 0.0 0.0 0.0 0.0 0.0 </LiftCoefficient> <DragCoefficient > 0.0 0.4 0.6 0.8 1.0 5.0 -180 0 0 0 0 0 0 -176 0.733 0.733 0.733 0.733 0.733 0.733 -168 0.995 0.995 0.995 0.995 0.995 0.995 -160 0.84 0.84 0.84 0.84 0.84 0.84 -152 0.68 0.68 0.68 0.68 0.68 0.68 -144 0.7825 0.7825 0.7825 0.7825 0.7825 0.7825 -136 0.9762 0.9762 0.9762 0.9762 0.9762 0.9762 -128 1.1712 1.1712 1.1712 1.1712 1.1712 1.1712 -120 1.3662 1.3662 1.3662 1.3662 1.3662 1.3662 -112 1.561 1.561 1.561 1.561 1.561 1.561 -104 1.76 1.76 1.76 1.76 1.76 1.76 -96 1.952 1.952 1.952 1.952 1.952 1.952 -88 2.079 2.079 2.079 2.079 2.079 2.079 -80 2.086 2.086 2.086 2.086 2.086 2.086 -72 2.005 2.005 2.005 2.005 2.005 2.005 -64 1.826 1.826 1.826 1.826 1.826 1.826 -56 1.554 1.554 1.554 1.554 1.554 1.554 -48 1.262 1.262 1.262 1.262 1.262 1.262 -40 0.9725 0.9725 0.9725 0.9725 0.9725 0.9725 -32 0.6975 0.6975 0.6975 0.6975 0.6975 0.6975 -28 0.562 0.57 0.578 0.593 0.601 0.601 -24 0.417 0.448 0.469 0.52 0.543 0.543 -20 0.267 0.33 0.361 0.44 0.486 0.486 -16 0.12 0.208 0.285 0.364 0.428 0.428 -12 0.018 0.022 0.191 0.29 0.37 0.37 -8 0.008 0.009 0.07 0.16 0.248 0.248 -4 0.0055 0.008 0.0125 0.065 0.152 0.152 0 0.0035 0.008 0.008 0.017 0.09 0.09 4 0.0055 0.0085 0.011 0.09 0.1525 0.1525 8 0.008 0.014 0.073 0.17 0.249 0.249 12 0.018 0.028 0.179 0.285 0.37 0.37 16 0.12 0.13 0.283 0.361 0.428 0.428 20 0.265 0.345 0.358 0.435 0.486 0.486 24 0.455 0.455 0.467 0.508 0.543 0.543 28 0.56 0.56 0.576 0.583 0.601 0.601 32 0.6975 0.6975 0.6975 0.6975 0.6975 0.6975 40 0.9725 0.9725 0.9725 0.9725 0.9725 0.9725 48 1.2625 1.2625 1.2625 1.2625 1.2625 1.2625 56 1.554 1.554 1.554 1.554 1.554 1.554 64 1.826 1.826 1.826 1.826 1.826 1.826 72 2.005 2.005 2.005 2.005 2.005 2.005 80 2.086 2.086 2.086 2.086 2.086 2.086 88 2.079 2.079 2.079 2.079 2.079 2.079 96 1.9525 1.9525 1.9525 1.9525 1.9525 1.9525 104 1.76 1.76 1.76 1.76 1.76 1.76 112 1.5612 1.5612 1.5612 1.5612 1.5612 1.5612 120 1.366 1.366 1.366 1.366 1.366 1.366 128 1.171 1.171 1.171 1.171 1.171 1.171 136 0.976 0.976 0.976 0.976 0.976 0.976 144 0.7825 0.7825 0.7825 0.7825 0.7825 0.7825 152 0.68 0.68 0.68 0.68 0.68 0.68 160 0.84 0.84 0.84 0.84 0.84 0.84 168 0.996 0.996 0.996 0.996 0.996 0.996 176 0.733 0.733 0.733 0.733 0.733 0.733 180 0.0 0.0 0.0 0.0 0.0 0.0 </DragCoefficient> </Blades> <Controls A1UL="6.5" A1LL="-6.5" B1UL="10" B1LL="-10.0" thetaLL="4.5" thetaUL="17.3" useExtendedCollectiveRange="false" /> </AerodynamicFeatures> </Rotor> <Rotor type="FGRotorMomentumTheory"> <Geometry> <Position x="-0.1" y="-4.9460" z="-0.0080"/> <Tilt lateralTilt="-90.0" longitudinalTilt="0.0" /> <Blades radius="0.71" chord="0.050" count="2" hingeOffset="0.0" /> <Delta3 angle="0" /> </Geometry> <MechanicalFeatures Ir="0.35" Ib="0.027"/> <AerodynamicFeatures> <GroundEffect magnitude="0.05" /> <DesignRPM rpm="2874"/> <Blades liftCurveSlope="0.11" zeroLiftDragCoefficient="0.007" twist="0.0" /> <Controls A1UL="0" A1LL="0" B1UL="0" B1LL="0" thetaLL="17" thetaUL="-27" useExtendedCollectiveRange="true"/> <Power inducedPowerCorrectionFactor="1.05" /> <DynamicPressureRatio> <Sideslip> -1000 0.91 -30 0.91 -25 0.80 -20 0.72 -15 0.65 -10 0.60 -5 0.58 0 0.56 5 0.58 10 0.60 15 0.65 20 0.72 25 0.80 30 0.91 1000 0.91 </Sideslip> </DynamicPressureRatio> <Inplanewash> <Low_a1 a1 ="-6"> -1000 0 0 0 10 -0.17 20 0.043 30 0.26 40 0.464 50 0.69 60 0.89 70 1.12 80 1.33 90 0.69 100 0 1000 0.86 </Low_a1> <Medium_a1 a1 ="0"> -1000 0 0 -0.34 10 -0.52 20 -0.17 30 0.10 40 0.31 50 0.52 60 0.71 70 0.91 80 1.12 90 0.57 100 0 1000 0 </Medium_a1> <High_a1 a1 ="6"> -1000 -0.48 0 -0.48 10 -0.69 20 -0.64 30 -0.27 40 0.03 50 0.27 60 0.52 70 0.74 80 0.96 90 0.46 100 0 </High_a1> </Inplanewash> <Downwash> <Low_a1 a1 ="-6"> -1000 -0.12 0 -0.12 10 0.71 20 1.60 30 1.62 40 1.66 50 1.67 60 1.67 70 1.73 80 1.50 90 1.26 100 1.01 1000 1.01 </Low_a1> <Medium_a1 a1 ="0"> -1000 0.36 0 0.36 10 0.84 20 1.64 30 1.70 40 1.76 50 1.82 60 1.85 70 1.90 80 1.68 90 1.44 100 1.20 1000 1.20 </Medium_a1> <High_a1 a1 ="6"> -1000 0.69 0 0.69 10 1.21 20 1.70 30 1.76 40 1.83 50 1.90 60 1.97 70 2.03 80 1.92 90 1.74 100 1.39 1000 1.39 </High_a1> </Downwash> </AerodynamicFeatures> </Rotor> </Rotors> <StabilizersAndWings> <HorizontalStabilizerRight> <Geometry> <Position x="1.8140" y="-4.9460" z="0.9800"/> <Up x="0.0" y="0.03489" z="0.9993908"/> <Front x="0" y="0.9993908" z="-0.03489"/> <SurfaceArea area="0.291028"/> </Geometry> <ControlResponse controlSurfaceLiftCoeffDerivative="0.0" controlSurfaceForceArmPos="0.0" /> <AerodynamicFeatures> <DynamicPressureRatio> <AoA> -1000 0.93 -30 0.93 -25 0.93 -20 0.88 -15 0.71 -10 0.71 -5 0.71 0 0.71 5 0.71 10 0.71 15 0.76 20 0.85 25 0.93 30 0.93 1000 0.93 </AoA> </DynamicPressureRatio> <MainRotorInplanewash> <Low_a1 a1 ="-6"> -1000 0 0 0 10 -0.18 20 0.04 30 0.26 40 0.47 50 0.70 60 0.91 70 1.14 80 1.36 90 0.70 100 0 1000 0 </Low_a1> <Medium_a1 a1 ="0"> -1000 -0.35 0 -0.35 10 -0.53 20 -0.18 30 0.11 40 0.32 50 0.53 60 0.73 70 0.93 80 1.14 90 0.58 100 0 1000 0 </Medium_a1> <High_a1 a1 ="6"> -1000 -0.49 0 -0.49 10 -0.70 20 -0.65 30 -0.28 40 0.03 50 0.28 60 0.53 70 0.76 80 0.99 90 0.47 100 0 1000 0 </High_a1> </MainRotorInplanewash> <MainRotorDownwash> <Low_a1 a1 ="-6"> -1000 -0.12 0 -0.12 10 0.74 20 1.66 30 1.67 40 1.71 50 1.73 60 1.76 70 1.78 80 1.55 90 1.30 100 1.05 1000 1.05 </Low_a1> <Medium_a1 a1 ="0"> -1000 0.37 0 0.37 10 0.86 20 1.69 30 1.76 40 1.82 50 1.88 60 1.91 70 1.97 80 1.74 90 1.49 100 1.24 1000 1.24 </Medium_a1> <High_a1 a1 ="6"> -1000 0.72 0 0.72 10 1.25 20 1.76 30 1.82 40 1.89 50 1.97 60 2.03 70 2.10 80 1.99 90 1.80 100 1.43 1000 1.43 </High_a1> </MainRotorDownwash> <GroundEffect startDistance="1.6" strength="0.0"/> <LiftCurve> -1000 0 -180 0 -150 0.61 -140 0.69 -130 0.69 -120 0.61 -110 0.46 -100 0.24 -90 0 -80 -0.24 -70 -0.46 -60 -0.61 -50 -0.69 -40 -0.79 -30 -0.91 0 -0.2 30 0.41 40 0.79 50 0.69 60 0.61 70 0.46 80 0.24 90 0 100 -0.24 110 -0.46 120 -0.61 130 -0.69 140 -0.69 150 -0.61 180 0 1000 0 </LiftCurve> <DragCurve > -1000 0.0 -180 0.0 -140 0.42 -130 0.56 -120 0.71 -110 0.84 -100 0.93 -90 0.96 -80 0.93 -70 0.84 -60 0.71 -50 0.56 -40 0.42 0 0.008 40 0.42 50 0.56 60 0.71 70 0.84 80 0.93 90 0.96 100 0.93 110 0.84 120 0.71 130 0.56 140 0.42 180 0.0 1000 0.0 </DragCurve> </AerodynamicFeatures> </HorizontalStabilizerRight> <HorizontalStabilizerLeft copy="HorizontalStabilizerRight"> <Geometry> <Position x="-1.8140" /> </Geometry> </HorizontalStabilizerLeft> <VerticalStabilizer> <Geometry> <Position x="0" y="-4.778" z="0.1340"/> <Up x="-1.0" y="0.0" z="0"/> <Front x="0" y="1.0" z="0"/> <SurfaceArea area="0.59"/> </Geometry> <ControlResponse controlSurfaceLiftCoeffDerivative="0.0" controlSurfaceForceArmPos="0.0" /> <AerodynamicFeatures> <DynamicPressureRatio> <Sideslip> -1000 0.95 -30 0.95 -25 0.84 -20 0.75 -15 0.68 -10 0.63 -5 0.61 0 0.59 5 0.61 10 0.63 15 0.68 20 0.75 25 0.84 30 0.95 1000 0.95 </Sideslip> </DynamicPressureRatio> <MainRotorInplanewash> <Low_a1 a1 ="-6"> -1000 0 0 0 10 -0.18 20 0.04 30 0.27 40 0.49 50 0.73 60 0.95 70 1.18 80 1.41 90 0.73 100 0 1000 0 </Low_a1> <Medium_a1 a1 ="0"> -1000 -0.36 0 -0.36 10 -0.55 20 -0.18 30 0.11 40 0.33 50 0.55 60 0.75 70 0.96 80 1.18 90 0.60 100 0 </Medium_a1> <High_a1 a1 ="6"> -1000 -0.51 0 -0.51 10 -0.73 20 -0.67 30 -0.29 40 0.04 50 0.29 60 0.55 70 0.78 80 1.02 90 0.49 100 0 1000 0 </High_a1> </MainRotorInplanewash> <MainRotorDownwash> <Low_a1 a1 ="-6"> -1000 -0.12 0 -0.12 10 0.74 20 1.67 30 1.69 40 1.73 50 1.75 60 1.78 70 1.80 80 1.57 90 1.32 100 1.06 1000 1.06 </Low_a1> <Medium_a1 a1 ="0"> -1000 0.37 0 0.37 10 0.87 20 1.71 30 1.78 40 1.84 50 1.90 60 1.93 70 1.99 80 1.76 90 1.51 100 1.26 1000 1.26 </Medium_a1> <High_a1 a1 ="6"> -1000 0.72 0 0.72 10 1.26 20 1.78 30 1.84 40 1.92 50 1.99 60 2.05 70 2.12 80 2.01 90 1.82 100 1.45 1000 1.45 </High_a1> </MainRotorDownwash> <GroundEffect startDistance="0" strength="0.0"/> <LiftCurve > -180 0 -170 0.34 -160 0.74 -150 0.80 -140 0.72 -130 0.57 -120 0.43 -110 0.29 -100 0.15 -90 0 -80 -0.15 -70 -0.29 -60 -0.43 -50 -0.57 -40 -0.72 -30 -0.80 -25 -1.00 -20 -1.34 0 0 20 1.34 25 1.00 30 0.80 40 0.72 50 0.57 60 0.43 70 0.29 80 0.15 90 0 100 -0.15 110 -0.29 120 -0.43 130 -0.57 140 -0.72 150 -0.80 160 -0.74 170 -0.34 180 0 </LiftCurve> <DragCurve> -1000 0.0 -180 0.0 -140 0.42 -130 0.56 -120 0.71 -110 0.84 -100 0.93 -90 0.96 -80 0.93 -70 0.84 -60 0.71 -50 0.56 -40 0.42 0 0.008 40 0.42 50 0.56 60 0.71 70 0.84 80 0.93 90 0.96 100 0.93 110 0.84 120 0.71 130 0.56 140 0.42 180 0.0 1000 0.0 </DragCurve> </AerodynamicFeatures> </VerticalStabilizer> </StabilizersAndWings> <GroundContacts> <GeneralConfiguration gearExtensionTime="3" gearDragCoefficient="0" gearReferenceArea="0" maxSteerableGearDeflection="80" steerableGearSpeedCorrectionFactor="0.0"/> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="-1.052" y="1.6933" z="-1.6717"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="1.052" y="1.6933" z="-1.6717"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="0.944" y="-0.6387" z="-1.5650"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="-0.944" y="-0.6387" z="-1.5650"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0.2" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0.18" /> </Suspension> <Wheel mass="1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> <GroundContact type="FGGroundContact200" > <Features isBrakable="false" isRetractable="false" isSteerable="false" /> <Aerodynamics equivalentFlatPlateArea ="0.0" /> <Suspension> <MountStation x="0" y="-4.341" z="-0.65"/> <SliderAxis x="0" y="0" z="1" /> <SuspensionLength length="0" /> <SpringParameters springConstant="420000" damperConstant="50000" maxCompression="0" /> </Suspension> <Wheel mass="0.1" radius="0.1" > <RollAxis x="1" y="0" z="0" /> <Friction slidingFriction="0.8" resistanceTorqueNoBrake="1000" resistanceTorqueFullBrake="1000" /> </Wheel> <Damage thresholdLoad="20000000" /> </GroundContact> </GroundContacts> </GenHeli600> Share this post Link to post Share on other sites
armored_sheep 56 Posted November 11, 2011 (edited) For tweeking the autotrim you can try altering values in FCSComponent type="FCSHelicopterAutoTrim100" block in XML. Some basic knowledge about PID controllers can be found here http://en.wikipedia.org/wiki/PID_controller Edited November 11, 2011 by Armored_Sheep Share this post Link to post Share on other sites
heli_flying 10 Posted November 11, 2011 You can also try to alter InputMapping nonlinearity="1.5" in both pitch and bank RateController (ControlSystem block in XML). Removing any nonlinearity may help users to adjust the controler imput better in game controler options.Real pilots, who prefer no centering force on stick and hold it with just fingertips may prefer linear response. Gamers with normal joystick who hold the stick with whole wirst, will most likely prefer smoother response curve (gamma 1.5 and more which is 1/4 or less on sensitivity slider) Thank you, i'm sure this can help a lot!! i have found some problems at high speed with pitch i attached this to the horizontal stabilizer, the real helicopters are more leveled in cruise the h stabilizer need to be more powerful with speed. Another bug is the main rotor rpm gauge in the medium, this one show the engines rpms instead the main rotor rpms, is there some way to get the main rotor rpms in the game? via script or something..:rolleyes: Share this post Link to post Share on other sites
nightsta1ker 10 Posted November 11, 2011 Heli flying... what program are you using to repack your .pbo and where in your TOH folder are you placing everything? I am totally confused by this process and everything I am reading on the forums and in Dev-heaven is just confusing me even more. Thanks in advance. Share this post Link to post Share on other sites
heli_flying 10 Posted November 12, 2011 i use cpbo.exe when you run this for first time the program create a registry association to every folder and later to repack the folder just right click and select "create a pbo", in win7 run as administrator download it from this link: http://www.kegetys.net/dl.php/tools07072010.zip the folder to repack need config and prefix files in other words the last air_us_h folder air_us_h/h_sim/air_us_h and this is your new air_us_h.pbo work in the same way like the original put this one in the addons folder Share this post Link to post Share on other sites
