Jump to content
Sign in to follow this  
Bon

COOP 20 Takistan Force (OA)

Recommended Posts

Ok I never heared about it, and it took me just a full hour to test in all kinds of situations and settings, tried to reproduce the problem on all versions, for all pilot slots, both on local hosted as well as on dedicated environment. It's all working fine.

I'm sorry to have wasted your time. I'll see if I can reproduce it and give you more of an exact setting (such as map, way of death, etc)

Edit: As for the MHQ's, I can only reproduce the problem in the North Version of the mission (co20_tfor_north.Takistan.pbo) I thought it was just because I had customized the mission, but the default version that comes with the download does it as well. I can build where the MHQ would be, but it's just not there. The "south" version of the mission there is a MHQ where it should be.

EDIT 2: How does the Vehicle Service Point work? I'm talking about the one you build from the MHQ. I can't seem to repair any vehicles at it. I don't get a "resssuply" option or anything. Is there a certain spot you have to park at it? I've driven around it so many times and can't figure it out. :/

EDIT 3: after adding an A-10 to the map, someone noticed the ILS (Instrument Landing System) isn't showing up when gear down and on approach. Is this something I need to add to the airfield in the editor?

Edited by zuff

Share this post


Link to post
Share on other sites

Ported TFOR to Lingor Island. Basically converted all vehicles and structures to USMC (Woodland) to suit Lingor's Jungle environment.

Also expanded the commanders construction options slightly, purchase barriers and camo nets etc.

Change log included & unpbo mission for those who want to tweak further.

http://www.mediafire.com/?anfe7pbjkm1y46p

Share this post


Link to post
Share on other sites
Ported TFOR to Lingor Island. Basically converted all vehicles and structures to USMC (Woodland) to suit Lingor's Jungle environment.

Also expanded the commanders construction options slightly, purchase barriers and camo nets etc.

Change log included & unpbo mission for those who want to tweak further.

http://www.mediafire.com/?anfe7pbjkm1y46p

Nice! Is there anyway you could make a vanilla version? I noticed that it used ACE and also required some expansions like BAF.

Good job! Lingor is so pretty :)

Share this post


Link to post
Share on other sites

Thats already been done, I used the BAF units as there multicam/woodland is better suited to Lingor but you can change it back by Editing the config.sqf file

Just change the true to a false for tfor_BAF

tfor_BAF = true; // add BAF equipment
tfor_ACE = false; // add ACE2 equipment
tfor_ACRE = false; // add ACRE radios

If that doesn't work you may have to change them manually but that should work. ACU in a jungle won't look cool though:butbut:

Share this post


Link to post
Share on other sites

Thanks for sharing the port, very kind of you. Will give it a go next week.

Cheers.

Share this post


Link to post
Share on other sites

Still playing TFOR with the Clan [ADO] ^^.

Played it again during last Friday training session ... we again failed the "Supply Truck mission", my mistake, IED powa !

But we were again unable to play the "Blackhawk down mission", we got a failure hint even before starting ...

Nevertheless TFOR is just great ...

Edited by Old Bear

Share this post


Link to post
Share on other sites

Already said this in another thread about your arty script, but a very nice mission!

Favourite scripts would have to be your arty and UAV scripts, I don't suppose you might release the UAV script for us? It's so superior over BIS, I have no idea how you did it but well done!!!

Share this post


Link to post
Share on other sites

Favourite scripts would have to be your arty and UAV scripts, I don't suppose you might release the UAV script for us? It's so superior over BIS, I have no idea how you did it but well done!!!

Hey,

actually, 95% of the UAV script is Bohemia code. There are some changes and modifications in order to make it compatible to MP and JIP and stuff, as well as some minor tweaks, but all in all... credits should go to BIS :)

However, here's the script extracted as a sample mission:

http://fh-warzone.de/downloads/boninf/scripts/uav.Desert_E.7z

hf.

Edited by Bon

Share this post


Link to post
Share on other sites

Well thanks anyway Bon! I guess I was meaning the fact You can change orbit height and radius and that it's an 8ring system instead of a 4 etc. Anyway thanks again!

Share this post


Link to post
Share on other sites

changelog:

  • FIXED: Civilian deathcounter does not work anymore with patch 1.56
  • FIXED: enemy officer in "capture officer" mission glitches inside hesco and dies
  • CHANGED: reduced radial blur a bit when in agony
  • CHANGED: Outro cam now considering players in vehicles and on buildings
  • ADDED: SADARM and DPICM rounds to artillery
  • ADDED: dynamic weather
  • ADDED: Chernarus edition

Download: takistan-force.net

Share this post


Link to post
Share on other sites
changelog:

  • FIXED: Civilian deathcounter does not work anymore with patch 1.56
  • FIXED: enemy officer in "capture officer" mission glitches inside hesco and dies
  • CHANGED: reduced radial blur a bit when in agony
  • CHANGED: Outro cam now considering players in vehicles and on buildings
  • ADDED: SADARM and DPICM rounds to artillery
  • ADDED: dynamic weather
  • ADDED: Chernarus edition

Download: takistan-force.net

Man you work is pretty awesome !!

Just tested your map , and its good ..:yay:

but sadly there is no ACE release for this Version isn't ?:butbut:

Share this post


Link to post
Share on other sites

Awesome Bon, love this mission, I am adding items to the Supply Drop but how would I edit code to allow them to drop without a Commander so I can test.

Merry Christmas thanks for the new version for the holiday weekend!

Vengeance

Edited by vengeance1

Share this post


Link to post
Share on other sites

Hey bro, this mission is definitely a great one to play.

Just wondering (Sorry if this has already been addressed)

Are you going to make this for ACE?

Currently my issues:

When killed you lose what was on your back

Cheers brotha

Edited by Solarghost

Share this post


Link to post
Share on other sites

Good work Bon. What would I need to do to make chinooks able to tow the MHQ and other heavier vehicles like tanks and bradleys? I tried adding "armored car" class to the configuration but no luck.

And vengeance can you tell me how you're adding items to the supply drop lost? Maybe post an example?

Edited by zuff

Share this post


Link to post
Share on other sites
As for the MHQ's, I can only reproduce the problem in the North Version of the mission (co20_tfor_north.Takistan.pbo) I thought it was just because I had customized the mission, but the default version that comes with the download does it as well. I can build where the MHQ would be, but it's just not there. The "south" version of the mission there is a MHQ where it should be.

I can confirm this bug on the official North mission. South is working fine, but in the North mission the MHQ does not appear. Using the editor it appear as it should in North version.

Tested on 1.03 and 1.04, with OA 1.56 and 1.57.

ps. THANK you for this mission! I've had hours of fun with it. :yay:

Share this post


Link to post
Share on other sites

Hi all,

hope you all survived the holidays...

Awesome Bon, love this mission, I am adding items to the Supply Drop but how would I edit code to allow them to drop without a Commander so I can test.
Tough to test alone, because the commander/supplies manager can't be requestor at the same time. It'd be still the easiest way to test it together with a mate.
Hey bro, this mission is definitely a great one to play.

Just wondering (Sorry if this has already been addressed)

Are you going to make this for ACE?

Currently my issues:

When killed you lose what was on your back

Hey solarghost, how u doin' mate?

In fact I addressed this a couple times now, I am not going to provide an ACE version of it. See post... hold on... minutes later... #150.

Good work Bon. What would I need to do to make chinooks able to tow the MHQ and other heavier vehicles like tanks and bradleys? I tried adding "armored car" class to the configuration but no luck.

Check out the file scripts\heli_lift.sqf and change the respective lines to the following:

_vehicles_lift_list = ["Car","Tank"];
_vehicles_nolift_list = [];

I can confirm this bug on the official North mission. South is working fine, but in the North mission the MHQ does not appear. Using the editor it appear as it should in North version.

Alright, thanks, gonna check it out asap. As long as its working on a dedicated environment, I don't give it high priority, though.

hf.

and a good start into the new year.

Share this post


Link to post
Share on other sites

Awesome work again Bon.I am literally spending my holidays playing cfor!:)

(no BAF woodland...:()

A problem we have is that when time speedup is enabled(12h day),our server crash badly,and when hosted locally ,gives alot of microstutter.Any ideas?

Issue exists only with Cfor.Tfor is very smooth.

Thanks for the hard work.

Share this post


Link to post
Share on other sites

Alright, thanks, gonna check it out asap. As long as its working on a dedicated environment, I don't give it high priority, though.

Did a few more tests regarding the MHQ issue and this is the result:

CFOR N - OK

CFOR S - OK

BAF N - NOT OK

BAF S - NOT OK

TFOR N - NOT OK

TFOR S - OK

Edit: And it is working fine on my computer when running it as dedicated server - same installation and same mission files etc.

Regards DirkG

Share this post


Link to post
Share on other sites

hello guys

to all ACE requester:

imho: the power of this mission is you can change almost everything in 3 scripts:

config.sqf

ammocrate_filler.sqf

recruitable_units.sqf

and of course the editor.

regards

Share this post


Link to post
Share on other sites
Good work Bon. What would I need to do to make chinooks able to tow the MHQ and other heavier vehicles like tanks and bradleys? I tried adding "armored car" class to the configuration but no luck.

And vengeance can you tell me how you're adding items to the supply drop lost? Maybe post an example?

The init.sqf in the Bon_Supplydrop folder:

_bon_supply_classes = tfor_commanders; //["US_Soldier_Officer_EP1"];

_bon_supply_supplements = [ // refilled after each hour

["USBasicWeapons_EP1",5],

["USSpecialWeapons_EP1",5],

["USLaunchers_EP1",5],

["BAF_BasicWeapons",5],

["BAF_Launchers",5],

["HMMWV_M998A2_SOV_DES_EP1",5],

["HMMWV_Terminal_EP1",5],

["HMMWV_MK19_DES_EP1",5],

["HMMWV_DES_EP1",5],

["HMMWV_M1151_M2_DES_EP1",5],

["AAV",5],

["ATV_US_EP1",10],

["BAF_FV510_D",2],

["M2A2_EP1",2],

["MTVR_DES_EP1",5],

["MtvrRepair_DES_EP1",5],

["MtvrReammo_DES_EP1",5],

["MtvrRefuel_DES_EP1",5],

["HMMWV_Ambulance_DES_EP1",5]

];

Share this post


Link to post
Share on other sites
hello guys

to all ACE requester:

imho: the power of this mission is you can change almost everything in 3 scripts:

config.sqf

ammocrate_filler.sqf

recruitable_units.sqf

and of course the editor.

regards

It actually does require you to change some stuff in initplayer.sqf to fix respawning with an ACE-style ruck or weapon on back. I also fixed the "Save Loadout" feature to support this. I will post my changes when I get home. I was able to make the mission playable in ACE pretty easily.

Share this post


Link to post
Share on other sites

Thanks vengeance1.

Bon, for some reason I cannot fix the MHQ problem on the North Takistan version of the mission. In preview mode it shows up, but as soon as you export and run on a local server it disappears.

I've tried so long to figure out what it could be. I've copied over the MHQ logic from the Zargabad and South Takistan missions over to the North version, and no luck.

I've also copied over the mhq.sqf file from the South version to the North, no luck.

I'm not really sure what's causing it, and it's mind boggling to say the least.

Did a few more tests regarding the MHQ issue and this is the result:

CFOR N - OK

CFOR S - OK

BAF N - NOT OK

BAF S - NOT OK

TFOR N - NOT OK

TFOR S - OK

Edit: And it is working fine on my computer when running it as dedicated server - same installation and same mission files etc.

Regards DirkG

Yah I've done extensive testing as well. Are you saying it works fine when testing on a Dedicated Server for all missions?

EDIT: After testing on Dedicated servers, I can confirm this is only with Locally hosted missions. It's strange that it sometimes works, and sometimes doesn't. Oh well. :(

Edited by zuff

Share this post


Link to post
Share on other sites
Thanks vengeance1.

Bon, for some reason I cannot fix the MHQ problem on the North Takistan version of the mission. In preview mode it shows up, but as soon as you export and run on a local server it disappears.

I've tried so long to figure out what it could be. I've copied over the MHQ logic from the Zargabad and South Takistan missions over to the North version, and no luck.

I've also copied over the mhq.sqf file from the South version to the North, no luck.

I'm not really sure what's causing it, and it's mind boggling to say the least.

Checked the code again and I have the suspicion its an initialization problem:

Since the mhq.sqf script is called from the init line of the logic, it is usually executed before the init.sqf (first init lines of objects, then the init.sqf).

In the init.sqf, however, is (due to including the config.sqf) firstly introduced the variable "tfor_mhqtype". So in some cases the mhq.sqf runs and tries to create the MHQ before its type is known. That's my fault and maybe a consequence of only testing this mission on a dedicated server and in the editor preview.

My suggestion is to try the following: On the very top of the mhq.sqf you add a line

WaitUntil{not isNil "tfor_mhqtype"};

and test it again.

Tell me if this does the trick (as I still have problems reproducing this issue).

Share this post


Link to post
Share on other sites

My suggestion is to try the following: On the very top of the mhq.sqf you add a line

WaitUntil{not isNil "tfor_mhqtype"};

and test it again.

Tell me if this does the trick (as I still have problems reproducing this issue).

FIXED! Good job! Thanks so much. Keep up the amazing work :)

Share this post


Link to post
Share on other sites

Please sign in to comment

You will be able to leave a comment after signing in



Sign In Now
Sign in to follow this  

×