Search the Community
Showing results for tags 'fcs'.
Found 3 results
-
Today's dev-branch update brings in an improvement to ranging, weapon zeroing and deflection. Most of the rangefinding equipment in the game lost its ability to measure range continuously. If you want to know the distance of a target you're pointing at you first need to lase it. By the "Auto Elevation" action. (The default keybind has been updated to "T" in Arma 3 and Apex presets) All tanks and APCs have lost the ability to automatically track targets. (The Visual sensors that have been recently added to Tank and Wheeled APC base classes have been removed again. If your mod vehicle should have an automatic target tracker you need to define a new sensor component.) At the same time they've received a more tanky-proper fire-control with an ability to use the laser ranging for assisted gun laying. What that means for tank gunners: Whenever you lase a target your main gun and coax's zeroing and deflection will be automatically adjusted according to the target's distance and motion. Keep pointing at the target and fire. First-shot hit ensured. As long as your target moves in a predictable pattern. For everything else you'll need to use your skill ;) Dumping the deflection and zeroing is possible via manual zeroing. New or adjusted elements in the optics: Large 4-digit number (usually at the bottom of the reticle or top right corner) - measured distance Smaller 4-digit number with SPD (bottom left corner) - measured speed of the target Small square (Ready to fire box) - indicates that the gun's zeroing and lead have been adjusted (does not indicate whether the gun has been loaded and is ready to fire) We're pushing the FCS way ahead of the Tanks DLC itself because of how the mechanic complements the Jets DLC Sensor overhaul. Try it, use it, break it. Please let us know what you think!
- 344 replies
-
- 47
-
Greetings all, i have a small problem some of you may be able to help me with. Im currently making a tank in Arma 3, and everything is complete bar texturing. however after doing some testing i discovered that the main gun isn't zeroing properly. It acts as if it doesnt get any range value from the rangefinder when T is pressed. And when manually zeroed its sometimes on point, sometimes off by 100's of meters. No matter what i try, moving the memory Lod points, tweaking the discretedistances and discretedistanceindex; my tanks main and coaxial guns are always of target. Here is a photo of my FCS in the vehicles config. https://gyazo.com/6eb4844c8832d2427d3a5a3208a82762 And here are the memory points that are used (the point at the end of the barrel is excluded from the image) https://gyazo.com/7a8ebf07a5cf434ca30b9e02d85194eb https://gyazo.com/a227d8e8552c7ee23237a5352db5465f all the memory points are in the correct place, and the gun elevates and depresses, just not in perfect sync with the gunnersview; i assumed this was the problem initially but after moving the gunnersview around i couldn't get them to sync up. Not that it should matter if its just draws a line from the barrel to intersect the line the gunnersview draws. :-/ I have run out of ideas for what it might be, hopefully someone here can give me a hand. Cheers in advance.
-
Is there going to be importance to have a loader now? Or are the gunners still loading literally everything on their own still?