Teleport into a vehicle (for only one faction)

[mzgr 8]

I am making a PvP mission, bluefor vs. opfor. Each side has an APC which is used as teleport starting point. Players get teleported into an ATV with this kind of script:

 

APC init:
 

Quote

this addAction["Teleport to ATV_Alpha", "teleportMHQbluefor.sqf", "ATV_Alpha"];

 

and the .sqf is:

 

Quote

 

params[ "_target", "_caller", "_id", "_args" ];

_teleportTo = missionNamespace getVariable [ _args, objNull ];

if ( !isNull _teleportTo && { alive _teleportTo } ) then {
    _caller moveInCargo _teleportTo;
    _caller vehicleChat format ["You have been deployed at %1", _teleportTo];
} else {
    _caller groupChat format ["Unable to deploy to %1 at this time.", _teleportTo];
};

 

Problem is, both sides can use both teleporters, instead of each its own. So i am looking for a way to limit ''teleport into a vehicle'' for only one faction

[RCA3 590]

Hi, please edit your message and use the Code or Quote buttons on your message top bar and move your code lines inside. And remove your color.

Thanks.

 

[RCA3 590]

Thanks. (Was hurting my eyes 😝).

Try this:

params[ "_target", "_caller", "_id", "_args" ];

private _realVehicleSide = [_target, true] call BIS_fnc_objectSide;
private _friendsides = _realVehicleSide call BIS_fnc_friendlySides; // can return [FRIENDLY,WEST,GUER,CIV]

if !(side _caller in _friendsides) exitWith{};

_teleportTo = missionNamespace getVariable [ _args, objNull ];

if ( !isNull _teleportTo && { alive _teleportTo } ) then {
    _caller moveInCargo _teleportTo;
    _caller vehicleChat format ["You have been deployed at %1", _teleportTo];
} else {
    _caller groupChat format ["Unable to deploy to %1 at this time.", _teleportTo];
};

 

Edited April 9, 2020 by RCA3
Fixed. Had a mistake on _friendsides line.

[mzgr 8]

😅 sorry man, as you can see i am very new at this.

I copiy-pasted you code in the sqf but unfortunatly, both side can still use all teleports.

Do i need to rename something maybe?

[RCA3 590]

It's ok.

 

Did you use the "fixed" version?

I'll test this out later if no one comes up with a better solution.

 

Cheers.

[mzgr 8]

Yes I did.

I will give you some more information. I have 2 .sqf files. 
teleportMHQbluefor.sqf  and teleportMHQopfor.sqf and each APC calls it's own in init.

When i copy paste your code in each of them, i can still teleport from both APC with both factions.

i also tried with a single file called teleport.sqf with your script.
I changed APC init to:
 

Quote

this addAction["Teleport to ATV_Alpha", "teleport.sqf", "ATV_Alpha"]; 

and for some reason i get the msg:  script teleport.sqf not found

ty

[mzgr 8]

and please, if you have enough patience, imagine you are explaining this to an idiot...

[RCA3 590]

Looks like your script was faulty from the get go:

13 hours ago, mzgr said:

this addAction["Teleport to ATV_Alpha", "teleportMHQbluefor.sqf", "ATV_Alpha"];

First, we must correct the argument on this line and pass an object instead of string. Objects have names without spaces (edit: and quotes).

this addAction["Teleport to ATV_Alpha", "teleportMHQbluefor.sqf", ATV_Alpha];

 

13 hours ago, mzgr said:

_teleportTo = missionNamespace getVariable [ _args, objNull ];

Here you are asking the mission "space" for a variable, which was the string variable you were passing, "ATV_Alpha" inside the action "space" through the _args parameter.

Since we already have the parameter we want through _args, we don't need to ask for it again, and would also return nil because the mission "space" does not have that variable defined as anything, it's just an "empty" string at this point. If it were to become a missionNameSpace variable it would have to be defined at some point through missionNameSpace setVariable ["ATV_Alpha", (some value)].

So, that line is irrelevant and we remove it.

 

For readability sake we make a copy of _args using _quad = _args.

From there on we just replace _teleportTo with _quad and we should be done 🙂.

I replaced alive with damage just in case the quad would be on fire but still not totally destroyed (damage >= 0.9).

params[ "_target", "_caller", "_id", "_args"];
private _quad = _args;
private _realVehicleSide = [_target, true] call BIS_fnc_objectSide;
private _friendsides = _realVehicleSide call BIS_fnc_friendlySides;

if !(side _caller in _friendsides) exitWith{};

if (!isNull _quad && {(damage _quad) < 0.9}) then {
    _caller moveInCargo _quad;
    _caller vehicleChat format ["You have been deployed at %1", _quad];
}else {
    _caller groupChat format ["Unable to deploy to %1 at this time.", _quad];
};

As for the sides part we're just running two BI Functions that helps us get relationships between objects and/or sides.

First we ask what's the side of the vehicle (_target) we're interacting with, and second we ask what sides are friendly to that side.

Finally, if the side of the person interacting with the vehicle (_caller), is not on the friendly sides of the vehicle, we exit the script and don't teleport.

 

Also, always search the Scripting Commands page when using any unknown command (or the link above for Functions).

 

Cheers.

Edited April 10, 2020 by RCA3

[mzgr 8]

Well, it works like a charm! This is one big step towards completing the mission.

Thank you very much man, oh and also thank you for the explanation, after i read it slowely few hundred more times maybe i will understand this magic 🙂

 

 

[mzgr 8]

Hello again,

I need to change this last scipt to teleport into a car UAZ 3151 from RHS AFRF (rhs_uaz_vdv) instead of a quad. It was suggested to me to:

Quote

pass the "_args" variable to the function, the 3rd index needs to be the classname of the vehicle you want to teleport to

However, this advice is not enough to help a person with my level of scripting knowledge.  All my attempts so far have failed.
So, RCA3 if you have the time to jump to the rescue once again that'd be awsome...

[Harzach 2517]

Just follow the same format @RCA3 provided. Name your UAZ as you did your ATV (UAZ_ALPHA or whatever) then use that as your argument.

[mzgr 8]

''Use that as your argument.''
I never wrote a script, so this is exactly what I need help on.

[Harzach 2517]

https://community.bistudio.com/wiki/addAction

 

Quote

this addAction ["Teleport to ATV_Alpha", "teleportMHQbluefor.sqf", ATV_Alpha];

 

ATV_Alpha is the argument in your original addAction code. I'm assuming the UAZ is for REDFOR to spawn into? In that case, you would use this code in your REDFOR APC (again, making assumptions about the naming of objects and scripts):

this addAction ["Teleport to UAZ_Alpha", "teleportMHQredfor.sqf", UAZ_Alpha];

 

 

[mzgr 8]

I dont think renaming is the problem. This script worked on ATV's, once I changed the ATV object type in attributes into UAZ, it stopped working. All variable names stayed the same

[Harzach 2517]

Share all of your code, please, including variable names of the relevant objects.

[Harzach 2517]

I just put together a repro mission.

 

On BLUFOR:

one NATO rifleman

one NATO Marshall with the init 

this addAction ["Teleport to ATV_Alpha", "teleportMHQ.sqf", ATV_Alpha];

one NATO ATV with variable name ATV_Alpha

On OPFOR:

one CSAT rifleman

one CSAT Marid with the init 

this addAction ["Teleport to UAZ_Alpha", "teleportMHQ.sqf", UAZ_Alpha];

one MSV UAZ 3151 with variable name UAZ_Alpha

ONE script named "teleportMHQ.sqf" containing @RCA3's script above.

 

Works great. One thing I would change is adding a show condition to the addActions so that each side can't see the addAction on the opposing side's MHQ (though thanks to RCA3's script, it is not functional for the opposing side anyway).

 

[mzgr 8]

Hi, finnaly found the thing that was blocking the script, thank you very much for your help @Harzach