NAA_Us_Marine 0 Posted December 1, 2002 Ok guys for a long time now people havent known about using event handlers in there cpp but i would like to know how to use them and maybe start a sticky for a compilation of them for other people to use. I would like a Example or some input on a event handler for damage like in the ah-1 cobra how the light blinks and the sound goes off when you are damaged so please put what you know about this and snippets in this topic. thx Share this post Link to post Share on other sites
NAA_Us_Marine 0 Posted December 2, 2002 Comon i know someone knows something about this can bis maybe give us a snippet? Share this post Link to post Share on other sites
NAA_Us_Marine 0 Posted December 4, 2002 Well this is another bump of the topic still wondering about how they do the lights blinking on the ah-1. Share this post Link to post Share on other sites
VXR 9 Posted December 4, 2002 the damage light in the cockpit can be done by making a verticle and name it "poskozeni" when you are ingame and the helicopter gets damaged you probaly see the verticle flashing yellow Share this post Link to post Share on other sites
NAA_Us_Marine 0 Posted December 4, 2002 yeah but i think that only means damage in czech and doesnt do anything but ill try it. what about event handlers like ones for firing a missile or stuff like that. Share this post Link to post Share on other sites
AirwolfPL 0 Posted December 4, 2002 </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (NAA_Us_Marine @ Dec. 04 2002,23:30)</td></tr><tr><td id="QUOTE">yeah but i think that only means damage in czech and doesnt do anything but ill try it. what about event handlers like ones for firing a missile or stuff like that.<span id='postcolor'> What I noticed is that it doesn't work for me, but it _does_ work in BIS's Cobra... Share this post Link to post Share on other sites
NAA_Us_Marine 0 Posted December 4, 2002 Yes thats cause it is an event handler and that is just damage in czech i would also like to know how bis does the damage percentile thing on the ah-1 and the altitude and the speed displayed in numbers all like they did on the ah-1 could someone from bis please help us here? Share this post Link to post Share on other sites
NAA_Us_Marine 0 Posted December 5, 2002 bump again here does anyone know how to do all the features like on the ah-1 if so please reply. Share this post Link to post Share on other sites
kegetys 2 Posted December 5, 2002 The BIS AH1 does not use event handlers for anything, they are all just selections/memory points in the model. Share this post Link to post Share on other sites
NAA_Us_Marine 0 Posted December 6, 2002 well then how does it display the altitude damage percent and speed? could you please tell me. Share this post Link to post Share on other sites
kegetys 2 Posted December 6, 2002 The whole hud is apparently supposed to appear after placing the following points into memory lod: HUD LH (for left top corner) HUD PH (for right top corner) HUD LD (for left bottom corner) HUD PD (for right bottom corner) Share this post Link to post Share on other sites
DragoFire 0 Posted December 6, 2002 How do you code a second event? I've setup the code as follows; </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Code Sample </td></tr><tr><td id="CODE"> class Animations {class Ltouterwing {type="rotation"; animPeriod=2; selection="lt outerwing"; axis="lt wing axis"; angle0=0; angle1=-1.55;}; class Rtouterwing {type="rotation"; animPeriod=2; selection="rt outerwing"; axis="rt wing axis"; angle0=0; angle1=1.55;}; class LtGear {type="rotation"; animPeriod=2; selection="lt gear"; axis="axis gear lt"; angle0=0; angle1=-1.55;}; class RtGear {type="rotation"; animPeriod=2; selection="rt gear"; axis="axis gear rt"; angle0=0; angle1=-1.55;}; class NoseGear {type="rotation"; animPeriod=2; selection="nose gear"; axis="axis gear nose"; angle0=0; angle1=-2.2;};}; class EventHandlers {gear = "if (_this Select 1) then {(_this Select 0) Animate [""LtGear"", 0]; (_this Select 0) Animate [""RtGear"", 0]; (_this Select 0) Animate [""NoseGear"", 0]} else {(_this Select 0) Animate [""LtGear"", 1]; (_this Select 0) Animate [""RtGear"", 1]; (_this Select 0) Animate [""NoseGear"", 1]}"; foldwing = "if (_this Select 1) then {(_this Select 0) Animate [""Ltouterwing"", 0]; (_this Select 0) Animate [""Rtouterwing"", 0]} else {(_this Select 0) Animate [""Ltouterwing"", 1]; (_this Select 0) Animate [""Rtouterwing"", 1]}"; }; <span id='postcolor'> But I can't seem to get the Wings to fold. Is there a step I've missed? DragoFire Share this post Link to post Share on other sites
kegetys 2 Posted December 6, 2002 foldwing? Theres only "killed", "hit", "engine", "getin", "getout", "fired", "incomingmissile", "dammaged", "fuel" and "init" events as far as I know... Share this post Link to post Share on other sites
DragoFire 0 Posted December 6, 2002 7--></span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (Kegetys @ Dec. 06 2002,207)</td></tr><tr><td id="QUOTE">foldwing? Theres only "killed", "hit", "engine", "getin", "getout", "fired", "incomingmissile", "dammaged", "fuel" and "init" events as far as I know...<span id='postcolor'> I've followed  "Sefe"'s guide to animate landing-gear, to get the Landing-gear to do what I want. But I can't seem to figure-out the "foldwing" event. Which is to fold the wings up when on the ground when parked or taxi'ing onto the runway. I hope someone can help. DragoFire PS. Does anyone know how the A-10's airbrakes were done? Share this post Link to post Share on other sites
colonel_klink 0 Posted December 6, 2002 The only way to do that as far as I know is by calling a script. I have automated the ai Sea King gear so that when the chopper is under a certain height and under a certain speed the gear goes up. go above that height or speed the gear comes down. It will work with wings too. Share this post Link to post Share on other sites
NAA_Us_Marine 0 Posted December 7, 2002 ok guys then what about playing sounds called in with the event handler how can this be done. Share this post Link to post Share on other sites
MidShip 0 Posted December 7, 2002 Coming back to your inherent question on the blinking lights of the ah-1. Let the event handler of your choice (see Kegetys list from above) invoke the setObjectTexture statement, to toggle the textures (e.g. by a script), to simulate blinking lights. On how to use setObjectTexture procedure is posted on this forum recently under the theme of retexturing, by Suma. For night effects, do use the correct vertices lighntning (e.g. shining). In the ofpec forum a jpg is placed at your post, to show the effect on behalf of the template craft (maybe I will extend the recent template on this). Share this post Link to post Share on other sites
Indy 0 Posted December 8, 2002 I've not understand so much about the blinking light, but it's not created adding the "poskozeni" point in memory lod? Share this post Link to post Share on other sites
VXR 9 Posted January 3, 2003 The blinking damage light has to be created in the pilot view by making a verticle and name it "poskozeni" Share this post Link to post Share on other sites
Liquid_Silence 0 Posted January 5, 2003 Since I don't really wanna start a new topic, and the name of the topic is eventHandlers (even if it isn't actually about them): In the command reference it says to look in "scripting topics" for more info on eventHandlers... Where are these "scripting topics"? 'cause I really need to know the parameters that each event passes on (when it calls a script...) so if someone knows where is it ("scripting topics"), or knows where I can find a list of the parameters, could they post a link... Share this post Link to post Share on other sites
Guest BratZ Posted January 5, 2003 I am on the topic of eventhandlers...I only have flawless sucsess using the gear tutorial and replacing the gear event. I messed with init and getin but obviously I have syntax errors.They work but I get a DX error upon starting OFP.Anyone else get this? Any examples of condtions? They seem to used differently. Share this post Link to post Share on other sites
Guest BratZ Posted January 9, 2003 Anyone know how I can change this to make it available for only the gunner position? condition="this animationPhase ""rcanopya"" < 0.03 and player in this "; And like any chance I can change this one to like only if the engine is running? Or anything better condition="this animationPhase ""foldwings"" < 0.5 and player in this "; I havent had to run a seperate script yet ,I've kept everything in the config the condition statement appears to only accept few conditions? Share this post Link to post Share on other sites
Liquid_Silence 0 Posted January 9, 2003 </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Quote (BratZ @ Jan. 09 2003,04:33)</td></tr><tr><td id="QUOTE">Anyone know how I can change this to make it available for only the gunner position? condition="this animationPhase ""rcanopya"" < 0.03 and player in this "; And like any chance I can change this one to like only if the engine is running? Or anything better condition="this animationPhase ""foldwings"" < 0.5 and player in this "; I havent had to run a seperate script yet ,I've kept everything in the config the condition statement appears to only accept few conditions?<span id='postcolor'> only in gunner position: </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Code Sample </td></tr><tr><td id="CODE">condition={(this animationPhase "rcanopya" < 0.03) and  (gunner this == player)}; <span id='postcolor'> only when engine running: </span><table border="0" align="center" width="95%" cellpadding="3" cellspacing="1"><tr><td>Code Sample </td></tr><tr><td id="CODE">condition={(this animationPhase "foldwings" < 0.5) and (player in this) and (isEngineOn this)};<span id='postcolor'> except that for the isEngineOn one, you may as well use the engine eventhandler... Um, I haven't used "isEngineOn" before but if it conforms to the way most OFP functions run the syntax should be right... EDIT: I haven't really looked at .cpp coding much yet though, so I haven't used eventHandler much yet...so I have no idea if these will work... Share this post Link to post Share on other sites
Guest BratZ Posted January 9, 2003 Great thank you very much,knowing the syntax helps better now And will reduce the action menu for the pilot,not having the rear canopy action Share this post Link to post Share on other sites