Terramesa 66 Posted July 16, 2016 Sabrina's Global Special Forces by Terramesa DESCRIPTION Hello everyone, Welcome to the discussion thread regarding development on the Sabrina's Global Special Forces addon series. In this group of addons I aim to create authentic uniforms (using stock A3 assets and maybe ported models) of most special forces units from around the globe. The releases will be done in faction coalitions from the "Wargame" franchise. e.g. Commonwealth, LANDJUT, etc. This is done just to keep the release simple and what I can focus on at the current state. They wont be like this in the editor, instead I will be using separate countries. These uniforms will be portrayed in the modern era (2000 on-wards). SGSF Core, will be needed for all other mods. PLANNED FEATURES Custom rvmat. BLUFOR, REDFOR and INDFOR countries. HD textures and screenshots. Research into each countries SF units. Custom patches. Modular design; i.e SGSF Core + Commonwealth or SGSF Core + Euroforce + Blue Dragons. etc. Core is a requirement though. Weapons; reskins, maybe ports from Arma 2, maybe original models. Vehicles; reskins, maybe ports from Arma 2, maybe original models. SGSF Opposing Forces; Still up in the air currently. i.e. freedom fighters terrorist groups etc. Planned coalitions/ countries include: > Commonwealth of Nations: AUS, NZ, CAN, UK. - In Progress > Euroforce: All Eurozone countries. - Not Started > Scandinavia + Finland: Denmark, Norway, Sweden and Finland.- Not Started > Blue Dragons: Japan, South Korea.- Not Started > Red Dragons: China, North Korea.- Not Started > Eastern Bloc: Czech Republic, Slovakia.- Not Started and some other countries outside coalitions: > USA.- Not Started > Central + South American countries.- Not Started > SE Asian countries. - Not Started >A selection of African countries. - Not Started > Greater Arabia. - Not Started > Central Asia. - Not Started OTHER DETAILS I'm always open to suggestions and help. If you have some high quality camouflages and would like to contribute, please feel free to PM me. (still looking for a good NZ MCU) RELEASES CORE - http://www.armaholic.com/page.php?id=32561 Com. - http://www.armaholic.com/page.php?id=32787 U.S. - TBA 4 Share this post Link to post Share on other sites
tasksoldier121 80 Posted July 16, 2016 Good luck dear forum dweller. Have you got any plans for producing some of your assets? Share this post Link to post Share on other sites
Terramesa 66 Posted July 16, 2016 I'm not sure what you mean by that. 1 Share this post Link to post Share on other sites
tpw 2315 Posted July 16, 2016 I wasn't sure either. Sounds like a great plan Terramesa, I for one would be really happy just to have the standard A3 uniforms with Aus insignia. Looking forward to see what you come up with. Share this post Link to post Share on other sites
Terramesa 66 Posted July 17, 2016 Hello again, I have made some progress today on the AUS uniforms. Here are some screenshots: http://imgur.com/a/FRYIt Please feel free to give me pointers and tips on what could be improved/ changed. If you have the Australian Army's AMP, AMCU and the NZDF's MCU. I would greatly appreciate it if you could send me the camouflage or source material. 1 Share this post Link to post Share on other sites
xxgetbuck123 945 Posted July 17, 2016 DPCU is a bit too bright.. but the DPDU seems pretty good. Share this post Link to post Share on other sites
Terramesa 66 Posted July 18, 2016 Update: Darkened DPCU. Added AMP and AMCU. AMCU http://imgur.com/4pePpnu AMP http://imgur.com/s1UrTNf 1 Share this post Link to post Share on other sites
Terramesa 66 Posted July 19, 2016 Added RAN clearance diver wet suit + re-breather. http://imgur.com/p2XOzG2 1 Share this post Link to post Share on other sites
Terramesa 66 Posted July 21, 2016 Hello again, I have added a New Zealand (NZ) faction. http://imgur.com/a/IBRg4 More to come. 1 Share this post Link to post Share on other sites
Terramesa 66 Posted July 26, 2016 hello everyone. Small update. I've been having some computer troubles lately and haven't been able to work on the project. I will continue when I sort this out. Share this post Link to post Share on other sites
mullan360 36 Posted July 26, 2016 Hi! This stuff looks pretty cool! Can I ask, what uniform are you retexturing or did you model it yourself? Regards, Mullan Share this post Link to post Share on other sites
road runner 4344 Posted July 26, 2016 Hi! This stuff looks pretty cool! Can I ask, what uniform are you retexturing or did you model it yourself? Regards, Mullan That's the standard BLUFOR Crye one from the game ;) Share this post Link to post Share on other sites
Terramesa 66 Posted July 27, 2016 Hi! This stuff looks pretty cool! Can I ask, what uniform are you retexturing or did you model it yourself? Regards, Mullan That's the standard BLUFOR Crye one from the game ;) Yes, Road runner is correct that I'm using the standard A3 NATO uniform .p3d for the current retexture. But I'm using a custom RVMAT which I have applied to the texture. (Will be refining in future). Share this post Link to post Share on other sites
road runner 4344 Posted July 28, 2016 Yes, Road runner is correct that I'm using the standard A3 NATO uniform .p3d for the current retexture. But I'm using a custom RVMAT which I have applied to the texture. (Will be refining in future). A small observation, Try adding some shadows to your uniforms, they lack a little depth, and look a bit flat ;) Share this post Link to post Share on other sites
Terramesa 66 Posted July 28, 2016 A small observation, Try adding some shadows to your uniforms, they lack a little depth, and look a bit flat ;) I have noticed this. I will try to add more depth to the uniform rvmat soon. Share this post Link to post Share on other sites
road runner 4344 Posted July 28, 2016 I have noticed this. I will try to add more depth to the uniform rvmat soon. don't think you can do that with the rvmats, what you need is to create a height map overlay and use multiply over your base texture, rvmats don't create shadows, I too use a custom rvmat, specifiacally the smdi, it eliminates the glossiness and shiny parts. ;) 1 Share this post Link to post Share on other sites
Terramesa 66 Posted October 7, 2016 Hello everyone, I'm back on the project. Just finished the UK uniforms and now moving onto the Canadian uniforms. Expect results in one week. Sill not sure on how the Desert DPM came out. But it will have to do. On the DPM and desert variant uniforms I put the respective camouflages on the gloves, just like the British infantry wear, but with an artistic twist. UK DPM UK DPM Desert MTP Plain Black > Not pictured. As always, if you have any suggestions, info or tips that you could give/ enlighten me with, please feel free to do so. 1 Share this post Link to post Share on other sites
deathwatch4 89 Posted October 7, 2016 Those textures are looking pretty good! Share this post Link to post Share on other sites
Terramesa 66 Posted October 28, 2016 Finished Commonwealth forces, moving onto Scandinavia + Finland. OP UPDATED. Here's screenshots of Canadian and Danish Special Forces. Still not happy with the CADPAT AR, but it's all I had. CAN CADPAT TW CADPAT AR MULTICAM DK M/01 M/84 M/11 The rest of Scandinavia + Finland should be done by the end of next week. Share this post Link to post Share on other sites
kothen 57 Posted October 28, 2016 This sounds great and the textures look great as well. Cant wait. Share this post Link to post Share on other sites
Terramesa 66 Posted November 6, 2016 All goals this week have been met. May I present to you the rest of Scandinavia + Finland; OP UPDATED NOTE: Couldn't find a good an M91 pattern for Finland, as a result it is not included. Norway / NOR M/98 M/03 Multicam - not pictured Sweden / SWE M90 M90K Finland / FIN M03 Hellepuku M05 Maastokuvio M05 Pakkaskuvio M05 Lumikuvio Multicam - Not pictured 2 Share this post Link to post Share on other sites
in005 241 Posted November 7, 2016 I really like those finnish uniforms, they look great in a kind of way. Share this post Link to post Share on other sites
Terramesa 66 Posted November 11, 2016 UPDATE: SGSF Now has a logo. OP UPDATED HD Version here: http://art-by-terramesa.deviantart.com/art/SGSF-logo-645169144 Share this post Link to post Share on other sites
Terramesa 66 Posted March 11, 2017 UPDATE 11/03/2017: Many things have happened irl so modding has been stopped for several months. I'm back and actively developing, textures and stuff. I have completed a new rvmat. It looks much better and defined, better shading, new gloves etc. Added unmarked plain colour uniforms, vests and helmets in; Black, Grey, White, Coyote, khaki, Ranger green, OD. And ADF patterns previously shown, maybe a DPCU/ DPDU vest. added cap and boonie aswell. Adding in the coming days unmarked camo patterns such as; Tiger stripe, atacs variants, multicam variants, kryptek variants. Want to suggest more? Sure. Will be releasing the Commonwealth countries, complete, maybe next week. Unsure. Each release will contain; coalitions' camouflage patterns including, headgear, vests (if needed), uniforms, factions and soldiers. Only vanilla + DLC weapons and equipment will be needed. No extra mods needed. Pics soon. Regards, Terramesa (SGSF Dev Lead.) 1 Share this post Link to post Share on other sites
Terramesa 66 Posted March 24, 2017 Hello, BI forums users. May I present the first release of SGSF: "SGSF_core" v1.0 In this release, there are uniforms, vests, helmets and patches ranging from solid colours such as; Black, Grey, White, Coyote, khaki, Ranger green, OD and camo variants such as; Tiger stripe, atacs variants, multicam variants, kryptek variants. All come with Arsenal and inventory pictures/ logos. Units for the respected camouflage variants are available under; Uniforms (plain or multicam or atacs etc). Admins/ Mods: Can you please move this to the complete section? Here is the .rar file: https://drive.google.com/open?id=0By3qCWWECHzbTzlrTXM1S3JMdWM Here are the screenshots for the AH page: NOTE: the Commonwealth units will be finished in the coming weeks, probably early-mid April. The AH page is being reviewed. Enjoy! 2 Share this post Link to post Share on other sites
