miketim 20 Posted November 11, 2014 Ok so , Janus, does that mean weapon resting is currently not functional? Since I did hit the button, re bound etc and nothing happens, is it only for certain "bipod" weapons or something? Edit: Also just a suggeston while I am at it, try to stay away from those top right corner black "hint" box things, (for instance, if you have seen the weapon rest on AGM, that sort of box in the right side that it shows) I like that whole black white style you guys have done with the UI so maybe try to change those little hint box things on the top right to something more "CSE style" Share this post Link to post Share on other sites
janus0104 3 Posted November 11, 2014 Ok so , Janus, does that mean weapon resting is currently not functional?Since I did hit the button, re bound etc and nothing happens, is it only for certain "bipod" weapons or something? Edit: Also just a suggeston while I am at it, try to stay away from those top right corner black "hint" box things, (for instance, if you have seen the weapon rest on AGM, that sort of box in the right side that it shows) I like that whole black white style you guys have done with the UI so maybe try to change those little hint box things on the top right to something more "CSE style" Not sure if it's entirely broken or just quirky at the moment, but it's getting replaced either way :) It's not just for bipod weapons, but those will obviously be better with remaining steady (at least when the update hits). As for hint boxes, I agree, especially since they stay shown for quite a long time. We're looking at expanding upon the white-and-black bar thing with some more functionality without getting in the way of the action. Not sure if it'll be finished before the update, we'll see. Share this post Link to post Share on other sites
Fennistil 10 Posted November 11, 2014 Weapon resting kind of works. Problem is that when you rest a weapon it will for some reason reoduce the recoil of the weapon when you fire it, but it does not have a big impact on the sway of the weapon itself. About the first aid kit suggestion. This would also work fine if you had a second item like a stitching kit that you use to seal up wounds and prevent them from opening up again. However this item should be a one use item like normal bandages. Another nice touch would be a setting inside the module for this where you can set up what type of wounds can get sealed by it. So you could set it up in a way that not all wounds could get closed up but only small or medium wounds etc. I would prefer this over the option you mentioned but I guess your one would also do fine. For this to work you would hover make it so that you could set the different options separately from each other. Meaning that you could set it up like this: Full heal is only possible by medics in a medical facility. Stitching is possible by medics everyhwhere. On both cases you would use up the first aid kit. Share this post Link to post Share on other sites
janus0104 3 Posted November 11, 2014 Will have to see... I like the idea of a second kit, but only if I can get a proper looking model done for it. Share this post Link to post Share on other sites
Fennistil 10 Posted November 12, 2014 Roger that. We are pretty much at a dead end with the exploding helicopter bug. We can prevent it by adding the line in the init I mentioned earlier but only for one time. When a new heli spawns it will explode again in a endless chain. We tried forcing in various ways to fix this, but with no positive results. Also we have no idea why this happens in combination with the basic revive module from cse. Has anyone else tried to figure this out yet? Share this post Link to post Share on other sites
badn3wz 10 Posted November 13, 2014 (edited) Hi, i'm having trouble running CSE on my dedicated server. Whenever I try to run mission that is using CSE I get following error: 22:39:44 Mission taskforce_cse_test.Stratis read from bank. 22:39:44 Missing addons detected: 22:39:44 cse_sys_medical 22:39:44 cse_sys_backblast 22:39:44 cse_sys_nightvision 22:39:44 Warning Message: You cannot play/edit this mission; it is dependent on dowd.cse_sys_medical, cse_sys_backblast, cse_sys_nightvision 22:39:44 Mission test.Stratis read from bank. 22:39:44 Mission test.Stratis: Missing 'description.ext::Header' I am starting the server like this: ./arma3server -mod=@CBA_A3;@CSE;@task_force_radio -config=server.cfg I tried using CSE_Server but it didn't seem to make any difference. I also tried reinstalling CSE but again with no effect. EDIT: I fixed the problem by renaming all the files to lowercase letters like said in this thread. Edited November 15, 2014 by badn3wz Share this post Link to post Share on other sites
janus0104 3 Posted November 14, 2014 Hi, i'm having trouble running CSE on my dedicated server. Whenever I try to run mission that is using CSE I get following error: 22:39:44 Mission taskforce_cse_test.Stratis read from bank. 22:39:44 Missing addons detected: 22:39:44 cse_sys_medical 22:39:44 cse_sys_backblast 22:39:44 cse_sys_nightvision 22:39:44 Warning Message: You cannot play/edit this mission; it is dependent on dowd.cse_sys_medical, cse_sys_backblast, cse_sys_nightvision 22:39:44 Mission test.Stratis read from bank. 22:39:44 Mission test.Stratis: Missing 'description.ext::Header' I am starting the server like this: ./arma3server -mod=@CBA_A3;@CSE;@task_force_radio -config=server.cfg I tried using CSE_Server but it didn't seem to make any difference. I also tried reinstalling CSE but again with no effect. Doesn't seem to find the pbos/anything in them... Are you sure the server is loading those mods? No idea how your server is set up. From the ./arma3server I'm assuming it's a linux dedicated server, could you try running a dedicated server under windows on your own PC, same files/config, see if it's an OS-related issue? Would be weird if it were, perhaps path symbol (/ vs \)? Share this post Link to post Share on other sites
badn3wz 10 Posted November 14, 2014 (edited) Thanks for quick reply. The problem is not in the way I start the server, task force and asr_ai3 are working fine. It would seem to me that the server is not loading the CSE or does'nt see pbos. I have no idea how to check for it however, since I can't find rpt files anywhere. Oh, and yes, it's linux. EDIT: I did some reading and found out that I need to get server logs on my own, so here is the error part of the server log: 11:19:36 ManagerConfig() 11:19:38 Unsupported language English in stringtable 11:19:38 Unsupported language English in stringtable 11:19:39 Updating base class ->Base, by a3\dubbing_radio_f\config.bin/CfgHQIdentities/PAPA_BEAR/ 11:19:39 Updating base class ->Base, by a3\dubbing_radio_f\config.bin/CfgHQIdentities/AirBase/ 11:19:39 Updating base class ->LandVehicle, by a3\data_f\config.bin/CfgVehicles/StaticWeapon/ 11:19:39 Updating base class RscShortcutButton->RscButton, by a3\editor_f\config.bin/RscDisplayEditObject/Controls/B_OK/ 11:19:39 Updating base class RscSliderH->RscXSliderH, by a3\editor_f\config.bin/RscDisplayEditObject/Slider/ 11:19:39 Updating base class RscText->RscPicture, by a3\editor_f\config.bin/RscDisplayEditObject/Preview/ 11:19:39 Updating base class RscShortcutButton->RscButton, by a3\editor_f\config.bin/RscDisplayMissionLoad/Controls/B_OK/ 11:19:39 Updating base class RscShortcutButton->RscButton, by a3\editor_f\config.bin/RscDisplayMissionSave/Controls/B_OK/ 11:19:40 Updating base class ->RscControlsGroup, by a3\ui_f\config.bin/RscControlsGroupNoScrollbars/ 11:19:40 Updating base class ->RscControlsGroup, by a3\ui_f\config.bin/RscControlsGroupNoHScrollbars/ 11:19:40 Updating base class ->RscControlsGroup, by a3\ui_f\config.bin/RscControlsGroupNoVScrollbars/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/RscLine/ 11:19:40 Updating base class ->RscActiveText, by a3\ui_f\config.bin/RscActivePicture/ 11:19:40 Updating base class ->RscButton, by a3\ui_f\config.bin/RscButtonTextOnly/ 11:19:40 Updating base class ->RscShortcutButton, by a3\ui_f\config.bin/RscShortcutButtonMain/ 11:19:40 Updating base class ->RscShortcutButton, by a3\ui_f\config.bin/RscButtonEditor/ 11:19:40 Updating base class ->RscShortcutButton, by a3\ui_f\config.bin/RscIGUIShortcutButton/ 11:19:40 Updating base class ->RscShortcutButton, by a3\ui_f\config.bin/RscGearShortcutButton/ 11:19:40 Updating base class ->RscShortcutButton, by a3\ui_f\config.bin/RscButtonMenu/ 11:19:40 Updating base class ->RscButtonMenu, by a3\ui_f\config.bin/RscButtonMenuOK/ 11:19:40 Updating base class ->RscButtonMenu, by a3\ui_f\config.bin/RscButtonMenuCancel/ 11:19:40 Updating base class ->RscButtonMenu, by a3\ui_f\config.bin/RscButtonMenuSteam/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/RscLoadingText/ 11:19:40 Updating base class ->RscListBox, by a3\ui_f\config.bin/RscIGUIListBox/ 11:19:40 Updating base class ->RscListNBox, by a3\ui_f\config.bin/RscIGUIListNBox/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/RscBackground/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/RscBackgroundGUI/ 11:19:40 Updating base class ->RscPicture, by a3\ui_f\config.bin/RscBackgroundGUILeft/ 11:19:40 Updating base class ->RscPicture, by a3\ui_f\config.bin/RscBackgroundGUIRight/ 11:19:40 Updating base class ->RscPicture, by a3\ui_f\config.bin/RscBackgroundGUIBottom/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/RscBackgroundGUITop/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/RscBackgroundGUIDark/ 11:19:40 Updating base class ->RscPictureKeepAspect, by a3\ui_f\config.bin/RscBackgroundLogo/ 11:19:40 Updating base class ->RscMapControl, by a3\ui_f\config.bin/RscMapControlEmpty/ 11:19:40 Updating base class ->RscPicture, by a3\ui_f\config.bin/CA_Mainback/ 11:19:40 Updating base class ->CA_Mainback, by a3\ui_f\config.bin/CA_Back/ 11:19:40 Updating base class ->CA_Mainback, by a3\ui_f\config.bin/CA_Title_Back/ 11:19:40 Updating base class ->CA_Mainback, by a3\ui_f\config.bin/CA_Black_Back/ 11:19:40 Updating base class ->RscTitle, by a3\ui_f\config.bin/CA_Title/ 11:19:40 Updating base class ->RscPictureKeepAspect, by a3\ui_f\config.bin/CA_Logo/ 11:19:40 Updating base class ->CA_Logo, by a3\ui_f\config.bin/CA_Logo_Small/ 11:19:40 Updating base class ->RscButton, by a3\ui_f\config.bin/CA_RscButton/ 11:19:40 Updating base class ->CA_RscButton, by a3\ui_f\config.bin/CA_RscButton_dialog/ 11:19:40 Updating base class ->RscActiveText, by a3\ui_f\config.bin/CA_Ok/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/CA_Ok_image/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/CA_Ok_image2/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/CA_Ok_text/ 11:19:40 Updating base class ->RscPicture, by a3\ui_f\config.bin/RscVignette/ 11:19:40 Updating base class ->RscControlsGroupNoScrollbars, by a3\ui_f\config.bin/RscMapControlTooltip/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenu, by a3\ui_f\config.bin/RscDisplayDebug/Controls/B_OK/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenu, by a3\ui_f\config.bin/RscDisplayDebug/Controls/B_Cancel/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenu, by a3\ui_f\config.bin/RscDisplayDebug/Controls/B_Clear/ 11:19:40 Updating base class ->RscText, by a3\ui_f\config.bin/RscDisplayCapture/controls/TimeLines/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenu, by a3\ui_f\config.bin/RscDisplayCapture/controls/ButtonAverages/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenu, by a3\ui_f\config.bin/RscDisplayCapture/controls/ButtonSavePreviousData/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenu, by a3\ui_f\config.bin/RscDisplayCapture/controls/ButtonPreviousData/ 11:19:40 Updating base class RscControlsGroup->RscControlsGroupNoHScrollbars, by a3\ui_f\config.bin/RscDisplayMain/controls/ModIcons/ 11:19:40 Updating base class RscPicture->RscPictureKeepAspect, by a3\ui_f\config.bin/RscDisplayMain/IconPicture/ 11:19:40 Updating base class IconPicture->RscPictureKeepAspect, by a3\ui_f\config.bin/RscDisplayMain/DlcOwnedIconPicture/ 11:19:40 Updating base class IconPicture->RscPictureKeepAspect, by a3\ui_f\config.bin/RscDisplayMain/DlcIconPicture/ 11:19:40 Updating base class RscListBox->RscCombo, by a3\ui_f\config.bin/RscDisplayCustomizeController/Steepness/ 11:19:40 Updating base class ->RscStandardDisplay, by a3\ui_f\config.bin/RscDisplayControlSchemes/ 11:19:40 Updating base class ButtonOK->RscButtonMenuCancel, by a3\ui_f\config.bin/RscDisplayControlSchemes/controls/ButtonCancel/ 11:19:40 Updating base class RscButton->RscButtonMenuOK, by a3\ui_f\config.bin/RscDisplayControlSchemes/controls/ButtonOK/ 11:19:40 Updating base class RscPicture->RscPictureKeepAspect, by a3\ui_f\config.bin/RscDisplayFileSelectImage/controls/OverviewPicture/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenuCancel, by a3\ui_f\config.bin/RscDisplayFieldManual/controls/ButtonCancel/ 11:19:40 Cannot delete class B_KickOff, it is referenced somewhere (used as a base class probably). 11:19:40 Updating base class RscButton->RscButtonMenuCancel, by a3\ui_f\config.bin/RscDisplayPublishMission/controls/ButtonCancel/ 11:19:40 Updating base class RscShortcutButton->RscButtonMenuOK, by a3\ui_f\config.bin/RscDisplayPublishMissionSelectTags/controls/ButtonOK/ 11:19:40 Updating base class ButtonOK->RscButtonMenuCancel, by a3\ui_f\config.bin/RscDisplayPublishMissionSelectTags/controls/ButtonCancel/ 11:19:40 Updating base class ->RscSubmenu, by a3\ui_f\config.bin/RscMainMenu/ Cannot update non class from class a3\ui_f\config.bin/RscCallSupport/Items/ Cannot update non class from class a3\ui_f\config.bin/RscRadio/Items/ 11:19:40 Updating base class ->None, by a3\characters_f\heads\config.bin/CfgGlasses/G_Diving/ 11:19:40 Updating base class ->Helicopter, by a3\air_f\config.bin/CfgVehicles/Helicopter_Base_F/ 11:19:40 Updating base class ->Helicopter_Base_F, by a3\air_f\config.bin/CfgVehicles/Helicopter_Base_H/ 11:19:40 Updating base class ->Car, by a3\armor_f_beta\config.bin/CfgVehicles/Car_F/ 11:19:40 Updating base class ->O_APC_Tracked_02_base_F, by a3\armor_f_beta\apc_tracked_02\config.bin/CfgVehicles/O_APC_Tracked_02_cannon_F/ 11:19:40 Updating base class Optics_Commander_02->Optics_Armored, by a3\armor_f_epb\apc_tracked_03\config.bin/Optics_Commander_03/ 11:19:40 Updating base class ->B_MBT_01_base_F, by a3\armor_f_gamma\mbt_01\config.bin/CfgVehicles/B_MBT_01_cannon_F/ 11:19:40 Updating base class ->Ship_F, by a3\boat_f\config.bin/CfgVehicles/Boat_F/ 11:19:40 Updating base class ->Ship_F, by a3\boat_f_gamma\boat_civil_01\config.bin/CfgVehicles/Boat_Civil_01_base_F/ 11:19:40 Updating base class ->Car_F, by a3\soft_f\config.bin/CfgVehicles/Truck_F/ 11:19:40 Updating base class ->Car_F, by a3\soft_f\offroad_01\config.bin/CfgVehicles/Offroad_01_base_F/ 11:19:40 Cannot delete class Eventhandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class Eventhandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class Eventhandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class EventHandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class EventHandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class Eventhandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class EventHandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class EventHandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class EventHandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Cannot delete class EventHandlers, it is referenced somewhere (used as a base class probably). 11:19:40 Updating base class ->UserActions, by a3\air_f_heli\heli_transport_02\config.bin/CfgVehicles/Heli_Transport_02_base_F/UserActions/ 11:19:41 ragdollHitDmgLimit (0.000000) is lower than minimum (0.010000) and it was set to min. 11:19:41 Initializing Steam Manager 11:19:41 ManagerConfig() 11:19:41 Steam Manager initialized. 11:19:41 InitSound ... 11:19:41 InitSound - complete 11:19:41 PhysX3 SDK Init started ... 11:19:41 PhysX3 SDK Init ended. [s_API FAIL] SteamAPI_Init() failed; SteamAPI_IsSteamRunning() failed. Setting breakpad minidump AppID = 107410 11:19:43 Initializing Steam server - Game Port: 2302, Steam Query Port: 2303 11:19:44 Connected to Steam servers 11:19:47 Mission test.Stratis: Missing 'description.ext::Header' 11:19:48 Server error: Player without identity badn3wz (id 1901832624) 11:19:48 Server error: Player without identity badn3wz (id 1901832624) 11:19:48 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:19:49 Server error: Player without identity badn3wz (id 1901832624) 11:20:10 Missing addons detected: 11:20:10 cse_sys_medical 11:20:10 cse_sys_backblast 11:20:10 cse_sys_nightvision 11:20:10 Warning Message: You cannot play/edit this mission; it is dependent on downloadable content that has been deleted.cse_sys_medical, cse_sys_backblast, cse_sys_nightvision 11:20:10 Mission test.Stratis: Missing 'description.ext::Header' 11:20:25 ../lib/Network/networkServer.cpp ClearNetServer:NOT IMPLEMENTED - briefing! 11:20:25 String id 2151 is not registered EDIT: I fixed the problem by renaming all the files to lowercase letters like said in this thread. Edited November 15, 2014 by badn3wz Share this post Link to post Share on other sites
glowbal 13 Posted November 14, 2014 We seem to have a issue with the basic revive module. If it is activated it will cause a chain of neverendign explosions if a vehicle gets destroyed while a player who is alive is inside it. We tried changing the hits while unconscious parameter to pretty much everything but the problem still exists. Any suggestions? I am on this. Expect a hotfix later today or early tomorrow. My appologies for the delay. Share this post Link to post Share on other sites
Fennistil 10 Posted November 14, 2014 I am on this. Expect a hotfix later today or early tomorrow. My appologies for the delay. Best news ever, seriously. For the time being we had to lock all our helicopters on our missions so it would not crash the server. :) Share this post Link to post Share on other sites
janus0104 3 Posted November 14, 2014 This would also work fine if you had a second item like a stitching kit that you use to seal up wounds and prevent them from opening up again. Surgical kit is a go Share this post Link to post Share on other sites
glowbal 13 Posted November 14, 2014 Hi, i'm having trouble running CSE on my dedicated server. Whenever I try to run mission that is using CSE I get following error:I tried using CSE_Server but it didn't seem to make any difference. I also tried reinstalling CSE but again with no effect. Hi, could you PM me the full server .rtp file? Hopefully that gives us some more insight in what is going wrong for you. Share this post Link to post Share on other sites
Fennistil 10 Posted November 14, 2014 Surgical kit is a gohttp://imgbin.org/images/20908.png Awesome. Share this post Link to post Share on other sites
Drakedge 10 Posted November 15, 2014 Hey guys, GREAT mods, been using this for a little while now. One of the issues I noticed recently though is that with the mission VTS (it's a zues like mission, similar to MCC) We can't seem to use the shop included in that mission to buy gear. It says "you do not have enough room for xyz". This only happens with CSE enabled. I also tried modulizing CSE down to just the medical system (which is fantastic, and a must have for tactical gamers) but was still getting that error with the mission. Unfortunately due to the nature of the mission, it seems to break it entirely if i add the modules in. So I guess my question is, with the medical system in place, does it alter the carrying capacity of stock uniforms, rigs, and bags? Or does someone know how to edit VTS, with out breaking it? Share this post Link to post Share on other sites
janus0104 3 Posted November 15, 2014 (edited) Hey guys, GREAT mods, been using this for a little while now. One of the issues I noticed recently though is that with the mission VTS (it's a zues like mission, similar to MCC) We can't seem to use the shop included in that mission to buy gear. It says "you do not have enough room for xyz".This only happens with CSE enabled. I also tried modulizing CSE down to just the medical system (which is fantastic, and a must have for tactical gamers) but was still getting that error with the mission. Unfortunately due to the nature of the mission, it seems to break it entirely if i add the modules in. So I guess my question is, with the medical system in place, does it alter the carrying capacity of stock uniforms, rigs, and bags? Or does someone know how to edit VTS, with out breaking it? Interesting. Could I get in contact with you (skype, steam, jabber, whatever) to try and figure out this issue? Feel free to PM me in this regard. Because.. I just downloaded this VTS mission thing, added the CSE Medical System module and ran it and there was no problem getting stuff from the shop. No RPT errors either. I tried throwing every CSE feature I could think of at it, either, including some that aren't released yet. No issues. Edited November 15, 2014 by janus0104 Share this post Link to post Share on other sites
Adeubal 10 Posted November 15, 2014 (edited) Hey guys, GREAT mods, been using this for a little while now. One of the issues I noticed recently though is that with the mission VTS (it's a zues like mission, similar to MCC) We can't seem to use the shop included in that mission to buy gear. It says "you do not have enough room for xyz".This only happens with CSE enabled. I also tried modulizing CSE down to just the medical system (which is fantastic, and a must have for tactical gamers) but was still getting that error with the mission. Unfortunately due to the nature of the mission, it seems to break it entirely if i add the modules in. So I guess my question is, with the medical system in place, does it alter the carrying capacity of stock uniforms, rigs, and bags? Or does someone know how to edit VTS, with out breaking it? Same here. Can't buy anything from CSE Problem solved since 0.9.0 Edited November 15, 2014 by Adeubal Wrong after MAJ Share this post Link to post Share on other sites
glowbal 13 Posted November 15, 2014 So I guess my question is, with the medical system in place, does it alter the carrying capacity of stock uniforms, rigs, and bags? No, none of the carry capacity is getting changed by anything in CSE. Share this post Link to post Share on other sites
Fennistil 10 Posted November 15, 2014 Any ETA on the hotfix today? Would make it easier to plan some things for me. Share this post Link to post Share on other sites
glowbal 13 Posted November 15, 2014 For those of you whom are having issues with the infinite explosions and basic revive, there is now a hotfix available. You can download it from here. Replace the cse_f_eh.pbo and its signature file from the download above by the files found in this hotfix. This will fix only the infinite explosions bug. No other changes. Share this post Link to post Share on other sites
Fennistil 10 Posted November 15, 2014 For those of you whom are having issues with the infinite explosions and basic revive, there is now a hotfix available.You can download it from here. Replace the cse_f_eh.pbo and its signature file from the download above by the files found in this hotfix. This will fix only the infinite explosions bug. No other changes. Link is 404. Error (404)We can't find the page you're looking for. Check out our Help Center and forums for help, or head back to home. :( Share this post Link to post Share on other sites
miketim 20 Posted November 15, 2014 Link works fine for me, on click it DLs one "CSE_0_9_1a_hotfix.zip" http://bit.ly/CSE_0_9_1_hotfix Try that, same link but.. never know Share this post Link to post Share on other sites
Fennistil 10 Posted November 15, 2014 Working now and so far it appears to be working. Thanks a lot. :) Share this post Link to post Share on other sites
glowbal 13 Posted November 15, 2014 Working now and so far it appears to be working.Thanks a lot. :) Great to hear! :) Sorry for the delay. Share this post Link to post Share on other sites
Drakedge 10 Posted November 16, 2014 Interesting. Could I get in contact with you (skype, steam, jabber, whatever) to try and figure out this issue? Feel free to PM me in this regard.Because.. I just downloaded this VTS mission thing, added the CSE Medical System module and ran it and there was no problem getting stuff from the shop. No RPT errors either. I tried throwing every CSE feature I could think of at it, either, including some that aren't released yet. No issues. You bet man, add me on steam, it's the same name there as here. I will be hosting tomorrow and will show you. Share this post Link to post Share on other sites
kecharles28 197 Posted November 16, 2014 Updated mod 0.9.1. hotfix available at withSIX. Download now by clicking: Share this post Link to post Share on other sites