tom3kb 15 Posted May 27, 2011 (edited) Hi, I made Single player Mission pack for Project RACS. This pack is my first public release for Arma 2. :) [ RACS_SP_Mission_Pack_1_by_tom3kb_v1 ] You all can download this pack from here: http://www.sendspace.pl/file/48e2d4e80ee89f0c205d6b1 Armaholic mirror: http://www.armaholic.com/page.php?id=14369 Requirements: ArmA2 Combined Operations v1.59 [ Arma 2 v1.09 and Operation Arrowhead v1.59 ] Addons needed: Project RACS Mod [15 addons archive] Project RACS Troops Project RACS C-130 Project RACS Etendard Project RACS F-15 Project RACS Mirage 3 Project RACS Objects Project RACS Wheeled Project RACS Static Project RACS A-4 Project RACS Tracked Project RACS Trucks Project RACS Heli Project RACS F-16 Project RACS A-heli Project RACS Weapons Installation: put RACS_SP_Mission_Pack_1_by_tom3kb_v1 folder in your: Arma 2\Missions folder. Little info about this pack. -9 single player mission pack -all miisons have short intro, and briefings, -briefings are short :( -mission language english, but i dont speak or write to good in this language. So i can make mistakes in briefings :) -you play as: soldier, plane\helicopter pilot,tank commander, sf operator etc, -in all missions you probably can find some small bugs, but im tested all missions and you can finnish all missions with no problems, -missions are rather basic: kill officer, destroy convoy, destroy aa battery and something like this. -no voice acting Feedback: Any and all constructive feedback is more then welcome. For now this mission pack version is final, but if you will find some serious bugs then i try to fix them. All mirrors are appriciated :) tom3kb Edited May 28, 2011 by tom3kb Share this post Link to post Share on other sites
Binkowski 26 Posted May 27, 2011 awesome! more RACS missions! Share this post Link to post Share on other sites
AZCoder 921 Posted May 28, 2011 I've played 3 so far, a lot of fun, thanks. One bug, each opening cutscene ends with this error: Error Undefined variable in expression: camdestroy_camera Probably just forgot to put a space in there before _camera. Also, I cannot play the Cobra mission "Gunship". During the blurry fade in, the helicopter is apparently airborne already, and it always crashes into trees before I can see anything. I think the short briefings are fine. These are quick fun missions, reminds me of CWC Classics by W0lle, but for RACS ;) Share this post Link to post Share on other sites
tom3kb 15 Posted May 29, 2011 @AZCoder Thanks for feedback. 1. Cutscene error, but you dont have intro crash its only show that error? 2. Cobra and f16 mission. Yes you start in air. TIP: maybe pull up a little wenn that blurry fade in starts or dont tuch cursors to its ends. I will check this. Ps: crimsontide make a remake of W0lle Cold War Crisis Classics for RACS. Share this post Link to post Share on other sites
wld427 1705 Posted May 29, 2011 Thanks for making this :bounce3: Share this post Link to post Share on other sites
tom3kb 15 Posted May 29, 2011 @wld427 Thanks, you made great mod. Wenn i lunch your mod first time i was thinking wow :) great mod and then i think to myself maybe i will make a mission for fun and test the units and 3 days later i have 9 simple missions to play. :) Share this post Link to post Share on other sites
Kommiekat 11 Posted May 29, 2011 What does RACS mean anyways? Sorry for my ignorance. Share this post Link to post Share on other sites
tom3kb 15 Posted May 29, 2011 @Kommiekat RACS=Royale Army Corps Sahrani Share this post Link to post Share on other sites
wld427 1705 Posted May 29, 2011 What does RACS mean anyways? Sorry for my ignorance. The RACS was a faction from Arma1. BIS left them woefully under equipped. Myself and my old buddy FA Dalai Lamar decided to make a little mod so they wouldnt suck so bad. Its amazing how its grown and developed over the years. Share this post Link to post Share on other sites
AZCoder 921 Posted May 30, 2011 @tom3kb 1: just the error, it's relatively benign 2: I use analog controllers which I think makes it extra tricky; I would recommend starting it over a clearing, maybe a quicker fade in also? Thanks again for putting this all together! Share this post Link to post Share on other sites
tom3kb 15 Posted May 30, 2011 @AZCoder Ok, yesterday i play all missions and the cobra mission few times ~15 times, and wenn this missions starts that cobra is allways hanging in the air and not move and its never crashed so maybe its problem with that analog controller i dont know, and the fade in its bis info text im not sure i can make it qiucker. I have no problem with that fade in in this mission, maybe restart will help. ---------- Post added at 04:40 AM ---------- Previous post was at 04:35 AM ---------- That error in cutscens its nothing big all cutscens work ok no crashes so i will wait for more bugs to show up and then i start to make v1.1. AZCoder thanks for feedback im glad that you like this mission pack. Share this post Link to post Share on other sites
AZCoder 921 Posted May 30, 2011 Yeah, all the camdestroy does is destroy the cam :) But that happens anyway when the mission starts, so no harm there. If you have your controls "wired up" for digital (in control settings), flying behaves quite differently, and hovering vehicles will stay put. Much too easy :) I use a Saitek X52 and it's "wired" to analog, so it's not going to maintain altitude. For shortening the fade in, this is what you have now in your init.sqf: "dynamicBlur" ppEffectCommit 7; titleCut ["", "BLACK IN", 5]; The ppEffectCommit is seconds of blur, so you could drop it to maybe 4 seconds. And maybe 2 on the titleCut. And put the helo over a clearing and setPosATL to give it a higher starting altitude, like maybe (just guessing): this setPosATL[(position this select 0),(position this select 1),(position this select 2)+150]; I would also shorten the fade in time on the Falcon mission. I was a bit surprised to see that I was flying at high speed toward a mountain, but happily I avoided it and beat the mission in one try :D These are just my opinions and suggestions, hoping it helps in some way. The war eagle mission was great fun, difficult, but I beat it on the first try :) Share this post Link to post Share on other sites
tom3kb 15 Posted May 30, 2011 @AZCoder thanks for all suggestion and opinions, I always check few times where i put flying plane/helicopter so wenn mission starts you dont crash on ground even with that fade in, maybe if you dont have luck in 1 of 10 case you will crash :( Ps: I like plane missions in arma but they always so short :) planes are so fast, few minutes and missions end. About Falcon i like to surprising :) Share this post Link to post Share on other sites
Kommiekat 11 Posted May 31, 2011 @KommiekatRACS=Royale Army Corps Sahrani The RACS was a faction from Arma1. OK, thanks. Enjoying the missions so far! Share this post Link to post Share on other sites
tom3kb 15 Posted May 31, 2011 Guys i have question on my hdd i have 22 missions for arma2 co and ~10 campaigns with cutscens [1 campaign with zombies :) ] but all texts and briefings in that missions are in polish language, you have markers so you will know where to go or who to kill but probably you will not know/understand the story. What du you think should i realese them for community or let them die on me hdd :) ---------- Post added at 05:04 AM ---------- Previous post was at 04:53 AM ---------- Ps: missions and campaigns are 1 or 2 years old i made them after Arma 2 was realesed and missions for OA are 1 year old. I will not make english versions for that missions i dont know english language so good, so probably all missions will be downloaded only few times from guys from Poland. So what should i du what du you think make them public or not? Share this post Link to post Share on other sites
AZCoder 921 Posted May 31, 2011 If you think they're fun to play, why not? I do remember a Russian mission, or maybe it was a campaign, that had no English. Honestly I did give up after awhile, I wasn't sure what to do for some tasks. But don't let that discourage you, please release whatever you think is appropriate. Share this post Link to post Share on other sites
Kommiekat 11 Posted May 31, 2011 So what should i du what du you think make them public or not? It may be a lot of work to do, I don't really know but,.....if you could at the least put English for the Mission Tasks, that should be enough........ Share this post Link to post Share on other sites
tom3kb 15 Posted May 31, 2011 I don't really know but,.....if you could at the least put English for the Mission Tasks, that should be enough........ @Kommiekat For now it seems like a good idea, i will try this tomorrow morning. If everything will by ok and If this method will be good, and fast i could release 1 campaign tomorrow for test and feedback. If not i think i will give myself rest with this idea of releasing my old campaigns. But thanks for your ideas AZCoder and Kommiekat. :) Share this post Link to post Share on other sites
tom3kb 15 Posted June 1, 2011 Sorry guys, the translation is going very slowly and reluctantly. So there will be no English version of my old campaigns. I dont speask English to good, and therefore the translation is going very very slow :( . Maybe in the future i will make new missions and campaigns and then english version will be done right away, because then everything goes faster. Share this post Link to post Share on other sites
Kommiekat 11 Posted June 1, 2011 Send me the stringtables. I'll use google translator and from there I'll try to guess the best responses. I've helped Mr. Bardosy twice before........ Share this post Link to post Share on other sites
tom3kb 15 Posted June 1, 2011 (edited) @Kommiekat I use a google translator to but it still takes too long. I probably give up with the translation. if you want to check and see how the first few of my [simple] missions and campaigns looks like you can download them from here: http://www.forum.armacenter.pl/viewtopic.php?p=146144#146144 check the links on this site You can find ther 2 missions pack with 22 missions for arma 2 co, and 3 campaigns. 1. Razor team you need Podagorsk island v1.0 or better v1.1 to play. 2. Biohazard its campaign with zombies you need The Undead mod v0.84 made by Charon. 3. Battlefield takistan you need only Arma 2 CO for playing. All missions and campaigns are made with Arma 2 co v.1.52 [A2 v1.09 and OA 1.52] but i suggest too use Arma 2 patch v1.59 for playing. all missions and campaigns versions are final i will not work with them any more. Warning missions are in Polish but without Polish letters like {Ä…, Ä™} I used alternatively {a, e} because i dont know how to make STRINGTABLE file. For me its to much work. :) Edited June 1, 2011 by tom3kb Share this post Link to post Share on other sites
Kommiekat 11 Posted June 2, 2011 @KommiekatI use a google translator to but it still takes too long. I probably give up with the translation. if you want to check and see how the first few of my [simple] missions and campaigns looks like you can download them from here: http://www.forum.armacenter.pl/viewtopic.php?p=146144#146144 check the links on this site You can find ther 2 missions pack with 22 missions for arma 2 co, and 3 campaigns. 1. Razor team you need Podagorsk island v1.0 or better v1.1 to play. 2. Biohazard its campaign with zombies you need The Undead mod v0.84 made by Charon. 3. Battlefield takistan you need only Arma 2 CO for playing. All missions and campaigns are made with Arma 2 co v.1.52 [A2 v1.09 and OA 1.52] but i suggest too use Arma 2 patch v1.59 for playing. all missions and campaigns versions are final i will not work with them any more. Warning missions are in Polish but without Polish letters like {Ä…, Ä™} I used alternatively {a, e} because i dont know how to make STRINGTABLE file. For me its to much work. :) Tell you what, if you can get a hold of Mr. Bardosy, he can crack these files for me, give me a basic English translation and I can clean it up after him. Seriously, as embarrassing as it is, I have no idea how to open files. Share this post Link to post Share on other sites
tom3kb 15 Posted June 5, 2011 (edited) Hi, i uploaded all my missions and campaigns on senspace.com, links you can find here in first post: http://www.forum.armacenter.pl/viewtopic.php?p=146265#146265 You can find there: 3 missions packs=31 missions and 12 campaigns=77 missions !!Warning!! Missions are in Polish language. All missions and campaigns versions are final and i will not make any updates\bug fixes of them any more. Edited June 5, 2011 by tom3kb Share this post Link to post Share on other sites