FIREBAAT

README.MD # GUESS WHAT! THIS PROJECT IS COMPLETELY UNTESTED! # ArmA1button 1 button (almost) build, deploy ArmA 3 server with mods ## The bullshit - Get docker.io - Create files creds and steamguard with your steam credentials and current steamguard code. - Create file server.cfg as per https://community.bistudio.com/wiki/Arma_3:_Server_Config_File ``` echo "[steamuid] [steampasswd]" > creds echo "[steamguardcode]" > steamguard ``` - When ./build.sh is invoked by _AACREATEARMA.sh > prepfolder.sh, Steam should reject your Steamguard code. - Immediate check your email and update the steamguard file. - Run it from the top again. If you're fast enough it should accept the old code. ## Mods - The modlist and missionlist files are both of the following format ``` [IDNUMBER]=[ARBITRARYNAME] ``` - Mods can be named anything; mission names MUST end with .[mapcode]. - Missions are downloaded in the usual manner. Softlinks are created in .../Arma\ 3\ Server/mpmissions. - Mods are downloaded in the usual manner. - If the addons and keys folders names are unnormalized, they are normalized. - Individual file names in .../addons are normalized. Soft links are created in .../Arma\ 3\ Server/keys and .../Arma\ 3\ Server/mods/lns - The file modline is discharged to .../Arma\ 3\ Server/mods ## Files - _AACREATEARMA.sh: Entrypoint. - build.sh: invokes docker build. Will attempt to build arma-i using maxhougas/steambox-i:db. - cheapinstall.sh installs and links mods and missions. Does the jobs of installmods.sh, installmissions.sh, linkmod.sh, and linkkey.sh. - creds: contains your actual Steam credentials in plaintext. Super-duper secure, never blind or delete this file. Not included. - dexec.sh: invokes docker exec. Can only take a single argument. - dockerfile.db: used when invoking docker build (build.sh). Will contain plaintext credentials. Discharged and deleted after use by prepfolder.sh - installmod.sh: invokes docker exec > steamcmd.sh. Useful for mods that DLs that time out. Does not link anything. - linkkey.sh: invoked by cheapinstall.sh. Creates softlinks. - linkmod.sh: invoked by cheapinstall.sh. Creates softlinks. - missionlist: contains idnumbers and mission names. Mission names *MUST* end with .[mapcode]. - modlist: contains idnumbers and modnames. Mod names are arbitrary, but this system assumes names contain only [0-9A-Za-z._-]*. - patharma: contains the full path to .../Arma\ 3\ Server, it is rendered as /Arma 3 Server though, be careful with that. - pathmod: contains the full path to .../107410. - prepfolder.sh: poorly named, creates .../mods and .../mods/lns; copies runarma.sh and server.cfg to .../mods; discharges dockerfile.db. - README.MD: this. - restart.sh: invokes docker stop and docker start. - run.sh: invokes docker run. Will attempt to run arma-s. Incoming ports are specified here. Bind mounts are specified here. - server.cfg: config file. Not included. - start.sh: invokes docker stop. - steamguard: contains your steamguard code. - steaminst: a steam CMD script file. Will contain plaintext credentials. Dischaged and deleted after use by cheapinstall.sh. Not included. - stop.sh: invokes docker start. ### Depricated - installmods.sh: invokes docker exec > steamcmd.sh to download mods. Creates appropriate softlinks and discharges the modline file. - installmissions.sh: invokes docker exec > steamcmd.sh to download missions. Creates softlinks. ~~~ _AACREATEARMA.sh #!/bin/bash ./prepfolder.sh ./run.sh ./cheapinstall.sh ./restart.sh ~~~ build.sh #!/bin/bash docker pull maxhougas/steambox-i:db docker build -t arma-i -f dockerfile.db . ~~~ cheapinstall.sh #!/bin/bash arma=$(cat patharma) mods=$(cat pathmod) echo "set_steam_guard_code $(cat steamguard)" > mods/steaminst echo "login $(cat creds)" > mods/steaminst echo "$(cat modlist)" >> mods/steaminst echo "$(cat missionlist)" >> mods/steaminst sed -i 's:^:workshop_download_item 107410 :g' mods/steaminst sed -i 's:^workshop_download_item 107410 set:set:g' mods/steaminst sed -i 's:^workshop_download_item 107410 login:login:g' mods/steaminst sed -i 's:=[A-Za-z0-9._-]*::g' mods/steaminst echo "quit" >> mods/steaminst docker exec -ti arma-s /steam/steamcmd.sh +runscript "$arma/mods/steaminst" #obliterate credentials rm mods/steaminst #Start modline echo -n \" > mods/modline #iterate modlist for line in $(cat modlist) do id=$(echo $line | sed "s:=[A-Za-z0-9._-]*::g") mname=$(echo $line | sed "s:[0-9]*=::g") ./linkmod.sh $id $mname ./linkkey.sh $id #Build modline echo -n "mods/lns/$mname;" >> mods/modline done #Finish modline sed -i "s:;$:\":g" mods/modline #iterate missionlist for line in $(cat missionlist) do id=$(echo $line | sed "s:=[A-Za-z0-9._-]*::g") mname=$(echo $line | sed "s:[0-9]*=::g") file=$(docker exec -t arma-s ls -1 $mods/$id | grep -io "[a-zA-Z0-9._-]*") docker exec -t arma-s ln -sfT $mods/$id/$file "$arma/mpmissions/$mname.pbo" done ~~~ linkkey.sh #!/bin/bash #$1 = id mod=$(cat pathmod) arma=$(cat patharma) #normalize keys folder if [ -n "$(docker exec -t arma-s ls $mod/$1 | grep -o 'Keys')" ]; then docker exec -t arma-s mv $mod/$1/Keys $mod/$1/keys fi if [ -n "$(docker exec -t arma-s ls $mod/$1 | grep -io 'keys')" ]; then for kname in $(docker exec -t arma-s ls $mod/$1/keys | grep -io "[A-Z0-9a-z._-]*.bikey") do #normalize key names nkname=$(echo $kname | tr [A-Z] [a-z]) if [ "$kname" != "$nkname" ]; then docker exec -t arma-s mv $mod/$1/keys/$kname $mod/$1/keys/$nkname fi docker exec -t arma-s ln -sT $mod/$1/keys/$nkname "$arma/keys/$nkname" done fi ~~~ linkmod.sh #!/bin/bash #$1 = id #$2 = name mod=$(cat pathmod) arma=$(cat patharma) #normalize addons folder if [ -n "$(docker exec -t arma-s ls $mod/$1 | grep -o 'Addons')" ]; then docker exec -t arma-s mv $mod/$1/Addons $mod/$1/addons fi #normalize pbo names for pname in $(docker exec -t arma-s ls $mod/$1/addons | grep -io "[A-Z0-9a-z._-]*") do npname=$(echo $pname | tr [A-Z] [a-z]) if [ "$pname" != "$npname" ]; then docker exec -t arma-s mv $mod/$1/addons/$pname $mod/$1/addons/$npname fi done #link docker exec -t arma-s ln -sT $mod/$1 "$arma/mods/lns/$2" ~~~ missionlist 2897579624=lish.vr ~~~ modlist 1388025252=mxretexture ~~~ patharma /root/Steam/steamapps/common/Arma 3 Server ~~~ pathmod /root/Steam/steamapps/workshop/content/107410 ~~~ prepfolder.sh #!/bin/bash #Prepare folder structure mkdir mods mkdir mods/lns cp server.cfg mods cp runarma.sh mods #Pull base image docker pull maxhougas/steambox-i:db #Discharge dockerfile echo "FROM maxhougas/steambox-i:db" > dockerfile.db echo "RUN ./steamcmd.sh +set_steam_guard_code $(cat steamguard) +login $(cat creds) +app_update 233780 +quit" >> dockerfile.db echo "WORKDIR /root/Steam/steamapps/common/Arma\\ 3\\ Server" >> dockerfile.db echo "CMD ./mods/runarma.sh" >> dockerfile.db #build image ./build.sh #Obliterate credentials rm dockerfile.db ~~~ run.sh #!/bin/bash docker run -dp 2302-2306:2302-2306/udp -v $(pwd)/save:/root/.local/share/Arma\ 3\ -\ Other\ Profiles/Player -v $(pwd)/107410:$(cat pathmod) -v $(pwd)/mods:/root/Steam/steamapps/common/Arma\ 3\ Server/mods --name arma-s arma-i ~~~ runarma.sh #!/bin/bash cd /root/Steam/steamapps/common/Arma\ 3\ Server ./arma3server_x64 -config=mods/server.cfg -mod=$(cat mods/modline) > mods/arma.log ~~~ start.sh #!/bin/bash docker start arma-s ~~~ stop.sh #!/bin/bash docker stop arma-s ~~~ Github link = https COLON SLASH SLASH github DOT com SLASH maxhougas SLASH arma1button Put a decent chunk of work into this; hope it helps someone. I got notifications for this one turned on, so holler any questions, comments, complaints, gripes, or bitches.

What's the mod? Does the documentation say anything about dependencies? If it's on steam, the steam page usually lists dependencies.

I'm using steamcmd, but this is what I use. #!/bin/bash #$1 = id #$2 = name mod=$(cat pathmod) arma=$(cat patharma) #normalize addons folder if [ -n "$(docker exec -t arma-s ls $mod/$1 | grep -o 'Addons')" ]; then docker exec -t arma-s mv $mod/$1/Addons $mod/$1/addons fi #normalize pbo names for pname in $(docker exec -t arma-s ls $mod/$1/addons | grep -io "[A-Z0-9a-z._-]*") do npname=$(echo $pname | tr [A-Z] [a-z]) if [ "$pname" != "$npname" ]; then docker exec -t arma-s mv $mod/$1/addons/$pname $mod/$1/addons/$npname fi done #link docker exec -t arma-s ln -sT $mod/$1 "$arma/mods/lns/$2" honestly you don't really need the if statements, you can just take Addons and all of it's contents and run them through tr. I thought the easiest way to do it was to grab everything with ls and scrape off all the non-printing characters with grep.

Grab your external ip and use direct connect? Hamachi? Some other VPN? I checked my server.cfg: hostname="MonkeysInc dedicated server"; motd[]={"Welcome to the they/them army.","Try not to get triggered."}; battleye=0; votingTimeOut=10; Maybe it's a battle eye thing? I think battle eye has it's own ports.