candleman 0 Posted December 4, 2004 Hi Djukel! Luckily I have all FDF versions. Can you tell me why should I use 1.1 or 1.2 instead of 1.3? Share this post Link to post Share on other sites
village idiot 0 Posted December 4, 2004 HI!I would like to use this satellite in other missions too. It is possible somehow or I just forget it? Unfortunately satellite is not an addon. Besides of independent scripts files, it makes lot commandlines in description.ext file which must be copied to every mission if you want to use it. Much more easy to put satellite script into a new mission than editing an old one. I you not insist on my satellite please search Blanco or Vectorbosson satellite script in Mission editing$scripting topic. Faster you can learn it how it works if you test one of it. Ok. I copied all folders from sat&map.zip to my sample mission folder and copied description file. It is right? How can I start satelite? I don't see useraction command. Share this post Link to post Share on other sites
djukel 0 Posted December 4, 2004 Hi Djukel!Luckily I have all FDF versions. Can you tell me why should I use 1.1 or 1.2 instead of 1.3? Version 1.1 and 1.2 "less finnish" and easier to copy, version 1.3 is nicer but cities is more "finnish" and a little complicated to copy all files. Otherwise nothing special. Village Idiot! I advise you to check Blanco or Vectorbosson script I mentioned before. BTW. I will upload soon the new v1.00 version! Share this post Link to post Share on other sites
djukel 0 Posted December 5, 2004 Instant Battle MOD v1.00 and template mission Short description: There are two (West,East) prebuilt Bases on the battlefield and other structures - Heliport, Supply depot, Prison camp, Headquaters - a little far from it. Every side have 11 groups. - 3 fighting (Alpha, Bravo, Charlie) groups - 5 guarding (Base, Supply depot, Heliport, Prison camp, Headquaters) groups - 1 specops (Commando) group - 2 support (CAS, Mortar) groups Besides of your army and skill there are some randomized events - you can take part in it, see below - to influence the outcome of battle. Reinforcement available every 2-4 minutes. Until enemy units standing nearby the base (150 m) reinforcement not available. Group can get reinforcement if consist of 1 man at least. Outnumbered group can not be reinforced. They will be arrives again from home territory about 30-40 minutes. Surrendered group can not be reinforced until you release them from enemy prison camp. Reinforcement automatically repairs weapons (like M2 machineguns or Mortars) on the base. There are three kind of resources, fuel, ammo, and building material. Every new vehicle requires fuel and ammo. Dammaged building needs Building material to repair. If one of the Resources decreases below 25%, must be go to nearest supply depot to supply it. If you have no ammo or fuel reserves, new vehicles come without it until supply convoy will arrives. Every buildings can be attacked by enemy. Damaged building automatically repairing if there is enough Building material. Destroyed building also can be repaired, but it takes more time. Destroyed building not working of course. For example if Factory is destroyed you won't get vehicle reinforcement. ================================================================= Object: Destroy enemy base or force all enemy units to surrender. ================================================================= Changes: - New structures Living home/enemy territory (check green/red ellipse marker on map) ======================================= - Civilian and military traffic - Check points with barrier on main roads - Ground and air patrol Prison camp (somewhere in an enemy territory) ============================================= - Location of captive soldiers HeadQuaters (in a city of the enemy territory) ============================================== - Location of general stuff Current house (in the city of the HeadQuaters) ============================================== - to switch streetlamps on/off - Commando missions by players Destroy Supply Depot: Blow up enemy supply depot to cut off supplies --------------------- Occupy Heliport: Take enemy heliport to disable enemy CAS and Commando actions ---------------- Release Prisoners: Set free prisoners to make surrendered figthing group operate again ------------------ Assault HeadQuaters: Make an attempt on general stuff to cause disorder among enemies - Scrolltext for description of Commando missions - "KIA", "MIA" sign next to groupname on report, depends on group Killed In Action (outnumbered) or Missing In Action (surrendered) - New useractions "Hijack a vehicle" : You can try to stop any vehicle without fight. Only available on home/enemy territory "Release a prisoner" : You can set free prisoners in prison camp. - New required addons, see below Required Addons =============== - MapFact Baracken 1.1 ftp://www.gamezone.cz:8021/ofpd/unofaddons2/Baracken1_1.zip - MapFact Military Object pack 1.0 http://www.edgefiles.com/files/16614.html MAP_MilObj-Pack_V1_0.rar - Marfy's MT-LB pack ftp://www.gamezone.cz:8021/ofpd/unofaddons2/MT-LB_Update_Installer2.exe - DynamicRange Soundpack (wss version from ECP) http://www.ofpec.com/editors/ecfg/current/DynamicRange.zip - Bas - Russian OPFOR v1.3 ftp://www.gamezone.cz:8021/ofpd/unofaddons2/BAS_RusOPFOR_v1_3.rar Further Addons =============== - files neeed if you have FDF mod 1.1 or 1.2 (from Finmod/Addons folder: copy FDF_eastborder.pbo, FDF_island_o.pbo, FDF_island_s.pbo to @GMR/Addons folder) - files neeed if you have FDF mod 1.3 (from Finmod/Addons folder: copy FDF_eastborder.pbo, FDF_island_o.pbo, FDF_island_s.pbo, FDF_s.pbo,FDF_worlds.pbo to @GMR/Addons folder and from Finmod/Worlds folder: copy FDF_eastborder.wrp to @GMR/Worlds folder) Temporary download place: http://au.briefcase.yahoo.com/ username: djukel password: faszkalap IBM_1.00.zip IBM_1.00sat&map.zip new d/l link is welcomed! Share this post Link to post Share on other sites
mr burns 132 Posted December 5, 2004 just had a quick battle with the old version, was really fun for the time i survived  version 1.00 mirror here IBM_1.00.zip - 2,8 MB IBM_1.00sat&map.zip - 1,5 MB @ofpc.de one question though... why do you use our dear goldmember´s old yahoo password    Share this post Link to post Share on other sites
djukel 0 Posted December 5, 2004 one question though... why do you use our dear goldmember´s old yahoo password Because I know him from somewhere else Thanks for the link otherwise! I need bug report how Headquaters attack and Prisoners release works. I have bad feelings not checking all problems I uploaded a FAQ about vaules and gameplay to my briefcase. I will enlarge it in the future. Share this post Link to post Share on other sites
mr burns 132 Posted December 7, 2004 tested the new version but it doesnt work for me. started with modfolder @gmr and then tried to play the included mission. mission loaded and set me somewhere on that bigass fdf map..together with 2 AI who weren´t under my command. i did some scouting and since nobody else was around i shot em both and quit. what am i doing wrong ? i was looking forward to the living home and civilian traffic stuff Share this post Link to post Share on other sites
djukel 0 Posted December 7, 2004 tested the new version but it doesnt work for me.started with modfolder @gmr and then tried to play the included mission. mission loaded and set me somewhere on that bigass fdf map..together with 2 AI who weren´t under my command. i did some scouting and since nobody else was around i shot em both and quit. what am i doing wrong ? i was looking forward to the living home and civilian traffic stuff If you did not get any error message it must be worked! After start did you see titletext "Deploying troop!"? If yes then bases are built (wach your back). First west army generated and after east. So if you play east side you have to wait almost a minutes to see your troops. Share this post Link to post Share on other sites
law-giver 190 Posted December 7, 2004 Hi djukel I get an error when starting @GMR ( no entry 'config.cpp/cfgweapons.machinegun7_6_E' ). Also the reinforcement eta text in the top right of the screen is merging with the eta time text. A small gripe! And the ai commando captured my supply depot and when i was firing at him, missing many times he never fired a single shot. Maybe he was out of ammo. Besides the small gripes this is a very enjoyable mission idea. Getting my ass kicked! Other than that it works a charm! Can't wait for further updates! Good job! Jon Share this post Link to post Share on other sites
mr burns 132 Posted December 8, 2004 got it working now...somehow the finmod interfered with gmr, there was a "model special" error at start of the mission. now with just the fdf island in my gmr addon folder everythings just fine, bases spawn and enemy kicked my ass realy bad, i think it was a bailed tank crew hiding in some bushes awesome mission, looking forward to any updates! btw: if i change the units, will i have to modify some of the scripts ? Share this post Link to post Share on other sites
candleman 0 Posted December 8, 2004 Hi! I haven't reached to enemy prison so far. Firstly I was very busy on battlefield, secondly my troops wasn't fallen to captivity. Besides enemy specops blow up my supply depot right there when I needed materials. Thus I couldn't rebuilt it and lack of ammo and fuel resources enemy slowly liquidated me. Once I got a script error message but disappered fast I coudn't recognized it. Djukel! I agree with Mr Burns to make availabe using other addons. Share this post Link to post Share on other sites
djukel 0 Posted December 8, 2004 btw: if i change the units, will i have to modify some of the scripts ? Yes. Changing soldier's addon is easy, vehicles are little complicated. I will update the FAQ "how to change addons" soon. Maybe I could put most popular addons into next version if you decide what they would be. Share this post Link to post Share on other sites
mr burns 132 Posted December 8, 2004 in my version (which doesn´t work anyway  ) there are: DKM´s: Black Eagle, Challenger, Tunguska, Havok & Comanche; RHS´s T-64; PSC´s BTRT; CBT´s M113, M6 & M2A3; Inq´s M1A2; CAF´s Griffon; and finally Nashje Oruje´s (sp?) Mi-2  edit: forgot VIT Apc´s.. i guess that´s way too much addons for every 08/15 user so i will keep looking forward to the tutorial edit2: imo a dkm version would b cool, they have many addons equaling each others so there will actually be some kind of balance between east and west (just castrate the Tunguska and ADATS a little bit, they´re killers ). Share this post Link to post Share on other sites
djukel 0 Posted December 9, 2004 FAQ has been updated (how to use addons?). Instant Battle MOD FAQ Share this post Link to post Share on other sites
mr burns 132 Posted December 9, 2004 thx for the tut just read it, it´s pretty understandable. ill now try to change some choppers. my biggest problem will be to collect all the classnames & ammo arrays edit: pbox is THE tool! i just saved several minutes of copying decompressing etc. the needed .pbo´s to get the .cpp, but now there´s something else itching me... binarized configs! dude i hate ´em, you just want to look into it to leech the unit name of a black eagle or some stinky t-62 but no.. mister addonmaker had to lock it down  Share this post Link to post Share on other sites
jolivan77 0 Posted December 9, 2004 Quote[/b] ] Maybe I could put most popular addons into next version if you decide what they would be. here is mine: M113 -> CAF_M113 M60 -> SIGM60 M1Abrams -> SIGM1 Russian Tanks -> RHS Tanks Share this post Link to post Share on other sites
mr burns 132 Posted December 9, 2004 Quote[/b] ] Maybe I could put most popular addons into next version if you decide what they would be. here is mine: M113 -> CAF_M113 M60 -> SIGM60 M1Abrams -> SIGM1 Russian Tanks -> RHS Tanks you´ll need to un-bin sig´s and rhs´s config.cpp´s Share this post Link to post Share on other sites
king homer 1 Posted December 9, 2004 Quote[/b] ] Maybe I could put most popular addons into next version if you decide what they would be. here is mine: M113 -> CAF_M113 M60 -> SIGM60 M1Abrams -> SIGM1 Russian Tanks -> RHS Tanks For the M1 you should wait till I'm releasing my tank Share this post Link to post Share on other sites
MrGuru 0 Posted December 9, 2004 Hi djukel, Any chance of using this without being a mod? just as a mission tamplate without the special effects? Reason I think it conflicts with FDF and causes CTD. So just maybe have a plain version with scripts and BIS default units tamplate?? Thanks Share this post Link to post Share on other sites
jolivan77 0 Posted December 9, 2004 Quote[/b] ] you´ll need to un-bin sig´s and rhs´s config.cpp´s I succeed to unpbo SIGM60, SIGM1 with PBO decryptor1.5 but I failed on RSH tanks Quote[/b] ] For the M1 you should wait till I'm releasing my tank Then hurry! Share this post Link to post Share on other sites
djukel 0 Posted December 9, 2004 Hi djukel,Any chance of using this without being a mod? just as a mission tamplate without the special effects? Reason I think it conflicts with FDF and causes CTD. So just maybe have a plain version with scripts and BIS default units tamplate?? Thanks Try to use island of FDF 1.1 or 1.2 that not cause CTD I am pretty sure. If it is not availabe use IBM version0.96. This is not contains home territory so could be implement to any other island just follow instruction on readme. Share this post Link to post Share on other sites
MrGuru 0 Posted December 9, 2004 hey, I have downloaded 0.96 since I have FDF 1.3. I think I must be missing something .. there is no mission file The other 0.96 folder has 3 missions? Are those two ziped files related? Thanks Share this post Link to post Share on other sites
mr burns 132 Posted December 9, 2004 i just replaced some units and 2 choppers in my exp_init.sqs .. but despite following your tut step by step it doesn´t work for me Share this post Link to post Share on other sites
VerySolidSnake 0 Posted December 10, 2004 Hey do you think you could release a "lite" version? Stripped down of any addons, special scripts, just the basic of basic (like on novoga or something)? Share this post Link to post Share on other sites