thesun

You should be able to use that path normally. The flag(pole) itself is in the 3den editor under Signs -> Flags -> Flag_AFMC.

Hey there, afmc flag texture is located in \csla_misc\signs\flags\flag_afmc_co.paa for more flags and other emblems/insignias, there's (hopefully) complete list on bohemia wiki

The issue with OT-62 interior happens when you run ČSLA and CUP together. The cause of this was found a resolved internally and will be in the next patch.

Hey there @Damian90 your're the first one to notice this. 🙂 Luckily, we know about this and it's only a mistake in screen labeling. With that I have to inform you that you are only partially correct regarding the tank's versions. The naming corresponds with versions manufactured / operated in Czechoslovakia. The versions were as follows: T-72 (early) - no smoke discargers - "no" side skirts and different type front mudguards - weaker armor - optical rangefinder TPD-2-49 - only 31 delivered directly from USSR in 1978 T-72 - laser rangefinder TPD-K-1 - rest is the same as the one before - made in CSSR since 1981 - numbers produced vary greatly T-72M - smoke dischargers - rubber sideskirts - rubber fuel tank and toolbox protection - weight +0.5t - ammo increase from 39 to 44 - other minor improvements in manufacturing process and other - about 251 producedin CSSR (incl. export) since 1985 T-72M1 - basically the same as above but... - new cast turret with armor steel + ceramic materials inserts - thicker (16mm) front glacis plate - again, other improvements on suspension, engine compartment, driver hatch and some others. - about 338 produced since 1986 (87 in service) The M1 is actually the only one that comes close to T-72A produced and used in USSR. And here is correct screen:

@Chortles As was already stated, these are still very WiP. Main reason why there are still no loadout variants is that these ports just reflect the variants we had for our mod in A2. At that time we had no option to choose the variants since the Su-25 and L-39 were BI models which we just retextured because there were no sample models available. We will put more effort into our planes in the future, that's for sure.

Congratulations to your release guys. Althought there's room for improvement, I'm glad to see some czech army stuff released. Do you also plan on adding some new stuff besides the content of acr dlc?

CZECH AIR FORCE ADDON V0.1 Hello folks, I bring you the CzAF addon which for now contains just three reskins for original ArmA2 helicopters. I plan to add some more units later on when the time permits. First on to-do list is L-159. Content: - Mi-35 - Mi-35 Tiger meet camo - Mi-17 Classes: acr_mi35 acr_mi35_tiger acr_mi17 Helicopters can be found under BLUFOR->ACR->AIR or EMPTY->AIR. All of them use flares to counter AA missiles and czech pilots from OA. Recomended to use with SABRE's retexed czech soldiers (http://www.armedassault.info/index.php?game=1&cat=addons&id=1473) In case someone would want to use the textures on other original models the paths are as follows: Mi-35 "\acr_air\mi35\data\mi24ext_CO.paa" "\acr_air\mi35\data\mi24v_002_co.paa" Mi-35 Tiger meet "\acr_air\mi35\data\mi24ext2_CO.paa" "\acr_air\mi35\data\mi24v_002_co.paa" Mi-17 "\acr_air\mi17\data\body_CO.paa" "\acr_air\mi17\data\det_co.paa" Credits: Author - TheSun Required version: 1.59 Know issues: - pilots with desert camo - some parts do not match the camouflage pattern because of the UV mapping Download (13MB): Gamefront Edisk.cz ArmedAssault.info Armaholic Screenshots:

ACR weapon pack addon V0.5 This pack contains several models of weapons used by Czech army, be it special forces or regular infantry. A lot of the weapons are present in ArmA already, these just add more varability to them. I plan to add more in time. For more news please follow this thread. Weapons and ammo can be found in an ammobox under EMPTY->AMUNITION->WEAPONS AND AMMO[ACR] All weapons (except for CG and G17) come in woodland/green, black and desert camo. Weapons use BIS mags as well as new mags with according models. Each weapon has it's own custom hand animation.(http://www.armedassault.info/index.php?game=1&cat=addons&id=1473) Classes: Installation: Copy both the acr_weapons.pbo and the acr_weapons.pbo.ACR.bisign in Addons folder in your ArmA2:OA / ArmA2:CO installation directory. Credits: Author - TheSun Yano from CSLA - Sa-58 base model Required version: 1.59 Download (104MB): Gamefront Edisk.cz Armaholic mirror thanks to Big ArmedAssault.info mirror thanks to Old Bear Six Updater mirror thanks to Sickboy Some screenshots: NOTE: Some of the models are quite dated (a lot) so please bear with their quality and of course report any bugsyou might encounter

Hi guys, I‘d like to present you some of the czech army addons I’ve been working for some time now. Most of the stuff was done by me with help of other ČSLA guys whom I’d like to thank for their support. If RL allows, I plan to release the addons in separate packs (air, weapons, vehicles….) and update them during the time with additional content (again if RL allows). First releases won’t be any big because as I said this project is more or less a one man show. I’ve released first version of the air pack already, check here. The other packs will follow. As for infantry units, for now the stock ones from OA will have to do and for woodland there’s a good option in Sabre’s retexes. The equipment they wear depicts the stuff regular soldiers use when deployed so no problem there. And one important note: You’ll surely recognize some of the models and textures from ArmA2/OA. That is because I’m their author and as with other mods I’m allowed to release them this way. So please no accusations of stealing or ripping or just anything. And now for some pics: As you can see I'm going mostly for the new stuff so don't expect UAZs or BMPs from me. For now the weapon pack does not bring anything really new but for a start the aim was to complement those already in OA and some of them with added functionality. Credits for the base Sa-58 rifle goes to Yano from ČSLA mod and the L-159 was originaly made for FSX by Vít Štorch and remapped and updated by me. Hopefully I'll be able to show you and release some more soon. And of course if anyone is willing to help me out with something i won't refuse help.

Hi guys, the work is going quite slow at the moment due to lack of free time, but here's some small update on the CZ805... @_William Thanks man, i really appreciate your work. @1986Marek Units are curently at the bottom of the to-do list, sorry.

Thanks for reporting the bugs to all of you. I've managed to fix all of them. I'll release new version once i'll have something more to add (hopefully soon enough). @colonel stagler Yes, the M4A3 is supposed to have all three modes, the new config inherits from M16_base which has all of them so it's ok.

AW is used by 601st SFG for sure.

@Old Bear and Sickboy Thansk guys! @J-Guid I don't use ACE, but i'm sure the problem with sounds would be the same even with ACE.

Iron sight above ACOG is not defined, my bad, i'll fix it. As for the sound mods, i'll fix that too. I don't use any so i simply forgot about that.

I'll be going mostly for the Meopta stuff since (i believe) that is what is part of the contract. I already have some of those but thanks anyway. Thanks for those.

Thanks guys. I'll still have to find out more about the accesories for this rifle, meaning red dot and other optics, there's not so much reference for those.

Very nice. Perhaps the driving wheel could use more polys for pilot view.

Ok, here's some CZ 805 WIP: The model is curently at 8300 tris and 4965 vertices. Red Dot, grenade launcher etc. are to be made.

CZ 805 definitely as it's the new standart assault rifle along with new pistols and skorpion.

Although some of the models look like they could use a bit more polys, your texture work is absolutely fantastic! ;)

I'll look into it if there's time. But i can't promise anything.

That's right. And regarding those the first one is probably going to be Pandur II. Our SF use m203 with their Bushmaster M4A3 rifles. For Sa-58 they used CIS-40GL (picture). And CZ 805 will get new czech made grenadelauncher (picture)

Instead of creting replacements for just the weapons I might do a new config file using original units, set them up as regular infantry squads and equip them with new weapons. I'll look into that. Actually i did just the weapons and some vehicles, units were made by Martinius, another ÄŒSLA member and the rest is BIS work.

Thanks for the comments guys. Iveco is on the To-do list and all vehicles are in desert and in woodland/green camo.

No problem. I might do exactly that :)