Laid3acK 79 Posted October 1, 2018 (edited) R3F Armes compat ACE3 with new reticle design, courtesy of the R3F Team Description : Basicly, the same ACE3 compat R3F (ballistic part only) from the ACE3 Guithub with some improvements : All reticles reworked to match as possible with all ballistics and to be accurate as possible with their real technical specification, the french military scopes SCROME J4, J8 and J10 in particular. New reticles used by French Special Forces and Police counter terrorism units. AtragMx presets for the R3F PGM, M107, TAC50, FrF2, HK417 20" and the SCARH PR/TPR calibrated with Strelok Pro. Animated rechamber bolt action added with the FrF2, TAC50 and PGM Hécate 2, can be managed with the CBA Weapons Options (OPTIONS - ADDONS OPTIONS). Proper cartridge ejection effect added with bolt action rifles. Ballistics improved : default ballistic according with the Advanced Ballistics. All rifles and pistols have their own MVs (the HK417 12" hasn't got the same MV than the 20" for example). Compatibility with CBA Joint Rails for the R3F scopes, silencers and front rail items. MRT Accessory Functions added for all R3F lampes and pointeurs items, can be managed with the CBA Weapons Options (CONTROLS - CONFIGURE ADDONS). Dispersion improved according with the ACE3 process. Partial Compatibility with the BI's magazineWells and third mods magazineWells (when possible with CUP, NIArms, RHS ...). Missing bipods icon in the inventory added. mass, inertia, aimTransitionSpeed and dexterity updated according with the last BI values. Full translation added (stringtable.xml). All documentation and two missions by Ruthberg for testing the ballistics with the Eden Editor included in the "docs" folder. - Normal conditions with AB enabled can be switched by disabling the ACE Weather option. - The wind can be managed in the editor by disabling the Wind Simulation (map based) option. - The latitude of the map can be found in the Extended Debug Console with : Watch -> ace_common_maplatitude This little addon requires CBA, R3F ARMES and ACE3 , but can be played without ACE3 if the vanilla Arma 3 game is preferred. Tested Single Player only (no MP), all feedback welcome. If the Advanced Ballistics option is enabled, the SCROME J8 and J10 gyroscopic compensation reticles must be selected by switching the Optics Mode. Content : Reworked reticles : French military SCROME J10 : Magnification 10x, BDC reticle 500-1800m, Gyro compensation reticle by switching the Optics Mode if Adv. Ballistics enabled, designed to work with the PGM Hecate II only. Zeroing in-game 1300m. French military SCROME J8 : Magnification 8x, BDC reticle 100-850m, Gyro compensation reticle (550 - 850m) by switching the Optics Mode if Adv. Ballistics enabled, designed to work with the FRF2 only. Zeroing in-game 100m. French military SCROME J4 : Magnification 4x, BDC reticle 300,400,500,600 meters, designed to work with 5.56 rifles but can work with 7.62 rifles with some adjustment. Zeroing in-game 300m. SCROME J8 / J10 MilDot : Zeroing in-game 100m, illuminated with "la mini Cyalume à l'arrache dans la bonnette" effect by switching the Optics Mode. Night optic sight OB50 : Magnification 3.2x. Zeroing in-game 300m. Diavari ZEISS 6-24x56 : magnification 6x-12x-24x, Second Focal Plane ZEISS Mildot reticle calibrated 12x according with the official documentation, illuminated by switching the Optics Mode. Zeroing in-game 100m. Hensoldt 4-16x56 FF (ZEISS fake) : magnification 4x-8x-16x, First Focal Plane Hensoldt MilDot reticle, illuminated by switching the Optics Mode. Zeroing in-game 100m. HENSOLDT official site Nightforce NXS 3.5-15x56 : magnification 3,5x-15x, Second Focal Plane NF MLR and Mil-Dot reticles, calibrated 15x according with the official documentation, illuminated by switching the Optics Mode. Zeroing in-game 100m. Nightforce official site Nightforce NXS 8-32x56 : magnification 8x-22x-32x, Second Focal Plane NF Mil-Dot reticles, calibrated 22x according with the official documentation, illuminated by switching the Optics Mode.Zeroing in-game 100m. Nightforce official site Nightforce NXS 12-42x56 : magnification 12x-22x-42x, Second Focal Plane NF MLR and Mil-Dot reticles, calibrated 22x according with the official documentation, illuminated by switching the Optics Mode. Zeroing in-game 100m. Nightforce official site Nightforce NXS 5.5-22x56 (Real BI scope LRPS designation) : magnification 5.5x-22x, Second Focal Plane NF MiL-R reticle calibrated 22x according with the official documentation, illuminated by switching the Optics Mode. Zeroing in-game 100m. Nightforce official site Schmidt&Bender 3-12x50 PM II/LP (LRPS fake) : magnification 6x-12x, First Focal Plane P3L reticle, illuminated by switching the Optics Mode. Zeroing in-game 100m. Schmidt&Bender official site Schmidt&Bender 5-25x56 PM II/LP (LRPS fake ) : magnification 12x-25x, First Focal Plane P3L and P4L fine reticles, illuminated by switching the Optics Mode. Zeroing in-game 100m. Schmidt&Bender official site Schmidt&Bender 1.5-8x26 PMII ShortDot (DMS fake) : magnification 3x-8x, First Focal Plane CQB Illuminated reticle. Zeroing in-game 100m. Schmidt&Bender official site Schmidt&Bender 1-8x24 PM II ShortDot Dual CC : magnification 1x CC-4x-8x, First Focal Plane MilDot CC and MDR-T6 Illuminated reticle. Zeroing in-game 100m. Schmidt&Bender official site ELCAN SpecterDR 4x/1x Dual Role Optical Sight : magnification 4x, Military 5.56-7.62 reticles. Zeroing in-game 100m. SpecterDR Reticle Calibration Reworked config : FELIN : Magnification 3x-10x CCD day channel digital zoom / 2,5x-5x Thermal imager digital zoom by switching the Optics Mode, according with the official documentation. FELIN FRF2 : Magnification 8x Day channel direct optic, 6x-12x Thermal imager digital zoom according with the official documentation. JIM LR : Long-Range Multifunction Binoculars, magnification 2x-4x-8x electronic zoom according with the official documentation. Preview SCROME military J10 reticle : The real one : Preview SCROME military J8 reticle : The real one : Change Log : [v1.8] : release 2022/03/11 Add ACE3 default and advanced ballistics compatibility for the updated @R3F Armes 3.7.4: HK416F, HK416A5, FN MINIMI, HK MP7A2 and PGM ULTIMA RATIO according to manufacturers datas. Add an AP 4.6x30 DM 11 according to the RUAG documentation (docs folder). Add an AP 12.7x99 HC SX according to the RUAG documentation (docs folder). Add a Hornady subsonic 9x19 147gr for the HK MP5SD3 (Hornady and Strelok Pro datas). Add a Lapua subsonic 7.62x56 200gr for FRF2, HK417 and SCARH (Lapua and Strelok Pro datas). Add 5.56, 7.62 and 12.7 tracers and dim tracers ammunitions ("tracerScale", "tracerStartTime" and "tracerEndTime" according to Nammo datas, times of flight from Strelok Pro). Add a Schmidt&Bender MilDot CC reticle for the 1-8x24 PMII ShortDot Dual CC according to the S&B documentation (docs folder). Improve all airFriction according to the advanced ballistics values (airFrictionAnalysis.txt in docs folder). Improve 4.6x30, 9x19, 5.56x45, 7.62x51 and 12.7x99 "caliber" with the BI "*.bisurf", the official Arma 3 penetration formula and the official Arma 3 Diagnostics Exe ("Shots") according to FN Herstal, General Dynamics Ordnance and Tactical Systems, MEN, Nammo and RUAG datas. Improve 4.6x30, 9x19, 5.56x45, 7.62x51 "hit" according to the NIJ Body Armor Classification. Update AtragMx presets (calibrated with Strelok Pro). Update the stringtable.xml (translations). Update SCROME J8 / J10 and S&B MDR-T6 reticles. Update all mass according to ACE3 (will be eventually necessary to check loadouts). [v1.71] : release 2021/04/07 Fix lines and dots thickness for NXS reticles Mil-Dot 15x / 22x according with the Nightforce documentation (docs folder). Fix the coordinates and scale of the Glock silencer icon in the inventory. Fix the R3F_30Rnd_556x45_TRACER_SCAR inherited from the vanilla 30Rnd_556x45_Stanag. Update the NXS MIL click values according with the Nightforce USA catalog 2011 (docs folder). Update the .xml translation. Revert to 500 meters the NXS 8-32 and 12-42x56 zeroing (AtragMx Zero Range will need to be updated). [v1.7] : release 2021/02/13 Add a S&B Shordot Dual CC MDR-T6 reticle (FFP 1xCC-4x-8x) calibrated according with the official S&B documentation (included in the docs folder). Add ELCAN SpecterDR 4x 5.56 and 7.62 military reticles according with the official Elcan documentation and ballistic patterns (included in the docs folder). Update the xml translations. Fix and update minor things. [v1.61] : release 2021/01/15 Fix the SCAR_H CQC barrel length according with the official FN HERSTAL documentation (airFriction, initSpeed and dispersion values according with the Advanced Ballistics). Update minor things, mainly the Inventory icons and some weapons maxZeroing values for the vanilla game. [v1.6] : release 2021/01/04 Add the SCAR-H PR / TPR, SCAR-H STD, SCAR-L STD / CQC and the FN Mag 58 according with the official FN HERSTAL documentation. Add the MEN 7.62x56 FMJ and AP for the SCAR-H TP / TPR according with the french FPSA (DMR) program and the official MEN documentation. AtragMx Presets updated for the SCAR-H PR / TPR. airFriction, dispersion, initSpeed according with the Advanced Ballistics. Schmidt&Bender scope 1-8x24 PM II ShortDot Dual CC updated according with the official documentation. [v1.5] : release 2020/08/13 Update the TAC-50 Default and Advanced ballistics according with the McMillan Tactical Products specification (included in doc folder) : 12.7 AMAX, 2700 fps (gap default ballistic / AB : 0.1 mRad to 2100 m). Add a Nightforce NXS 8-32x56 according with the McMillan Tactical Products specification (included in doc folder) : NF Second Focal Plane Mil-Dot reticle calibrated 22x, magnification 8-22-32x, zeroing in-game 100 m. Update all Nightforce Field of View according with the official Nightforce documentation (included in doc folder). Update the M107 default ballistic, airFriction recalculated for a gap with AB 0.1, 0.2 mRad to 1600 m. Update the Hensoldt 4x and S&B 6x reticles. Update all scopes zeroing at 100 m, except the OB50 (300 m), the J4 (300 m) and the J10 (1300 m). Update the AtragMx presets. [v1.431] : release 2020/04/14 Fix some "unknown author" and incorrect Eden Editor optic sights items. [v1.43] : release 2020/04/09 Add a (dummy) bubble level to the military SCROME J10 as the real one. Add a LRPS fake S&B 3-12x50 P3L reticle (double turn) used by the french special forces. Fix the Hensoldt reticle calibration. Update the J8/J10 Mildot, 22x MilR, 25x P4LF/P3L and the CQB 8x reticle calibration. Minor update for the AtragMx presets and P4FL reticle reworked. [v1.42] : release 2020/02/27 Fix the Nightforce NXS 5.5-22x56 Mil Dot calibration. Add the Schmidt & Bender 5-25x56 PM II P3L reticle used by the french Air special forces CPA 10. [v1.41] : release 2019/05/11 Steam Mod picture reuploaded. SCROME J10 and J8 MilDot updated. [v1.4] : release 2019/22/10 MRT Accessory Functions added for all R3F lampes and pointeurs items with a low luminosity level (default R3F), a high luminosity level (default vanilla Arma3) and the Ir laser, can be managed with the CBA Weapons Options (CONTROLS - CONFIGURE ADDONS). R3F SCROME J8 and J10 illuminated MilDot reticle added with "la mini Chemlight à l'arrache dans la bonnette" effect. A ZEISS fake : HENSOLDT 4-16x56 FF scope, used by the RAID, a special french Police counter terrorism unit. Minor changes and fix. [v1.3] : release 2019/10/07 Compatibility with the CBA Joint Rails for the R3F scopes, silencers and front rail items. Partial compatibility with the BI's magazineWells and third mods' magazineWells (when possible with CUP, NIArms, RHS ...). Ballistics improvement: initSpeed according with the Advanced Ballistics muzzle velocities at the normal conditions, all rifles and pistols have their own MVs now, the HK417 12" hasn't got the same MV than the 20" for example. Dispersion reworked if necessary according with the new MVs. Missing bipods icon in the inventory fixed. Animated rechamber bolt action added with the FrF2, TAC50 and PGM Hécate 2, can be managed with the CBA Weapons Options (OPTIONS - ADDONS OPTIONS). Proper cartridge ejection effect added with bolt action rifles. mass, inertia, aimTransitionSpeed and dexterity updated according with the last BI values. [v1.2] : release 2019/05/16 Compatibility with the CBA Joint Rails for all R3F scopes. Fix the 5.56 Minimi silencer class name after the Arma3 1.92 update. Fix the line thickness of the S&B P4FL reticle. Add two missions by Ruthberg for testing the ballistics with the Eden Editor (included in the "docs" folder). Add a new server key. Add the OB50 reticle. [v1.1] : release 2018/11/30 Add Glock 17 Gen5 ACE entries Add MLR reticle for the NXS 3.5-15x56 Add Mil-Dot reticle for the NXS 12-42x56 Add MiL-R reticle for the NXS 5.5-22x56 : real LRPS designation Add P4FL reticle : LRPS fake Add CQB reticle : DMS fake Add translation (stringtable.xml) Fix the R3F faction pop-up when the R3F weapons pack is played alone Update the 9mm Para Hit and the pistols dispersion Update the OB50 view : NVG only, this optic sight can't be used with high luminosity condition IRL. [v1] First release : 2018/10/01 Download : Link STEAM WorkShop Link MEGA Todo List : FELIN and FELIN FRF2 reticles. OB 50 reticle. S&B 5-25x56 PM II First Focal Plane P4L fine reticle (LRPS fake). S&B 1.5-8x26 PM II First Focal Plane Short Dot reticle CQB (DMS fake). Credits : R3F Team for the first french weapons pack in Arma3 and his kind authorization. ACE3 Team, particularly Ruthberg for the Advanced Ballistics, and all ACE3 contributors. CBA Team for the Joint Rails Compatibility, MRT Accessory Functions, Weapon Animations Framework, Cartridge Ejection Effect and the Debug Reticle Script. toadie2k for the free anims from her AWM Source Material. Bohemia Interactive and the Arma3 community. License : Arma Public License No Derivatives Edited March 11, 2022 by Laid3acK Update version 1.8 5 1 Share this post Link to post Share on other sites
Laid3acK 79 Posted November 30, 2018 Hello, just a quick update after the R3F weapons pack v3.6 release, a big thanks to the R3F team, links just above : - Add Glock 17 Gen5 ACE entries. - Add MLR reticle for the NXS 3.5-15x56. - Add Mil-Dot reticle for the NXS 12-42x56. - Add MiL-R reticle for the NXS 5.5-22x56 : real LRPS designation. - Add P4FL reticle : LRPS fake. - Add CQB reticle : DMS fake. - Add translation (stringtable.xml). - Fix the R3F faction pop-up when the R3F weapons pack is played alone. - Update the 9mm bullet Hit and the pistols dispersion. - Update the OB50 view : NVG only, this optic sight can't be used with high luminosity condition IRL. Here the excellent mission by Ruthberg, very useful to test the ballistics : https://drive.google.com/open?id=1tkkkYgQe56kJhSTdd_CZHqks5xjmx0-3 - Normal conditions with AB enabled can be switched by disabling the ACE Weather option. - The wind can be managed in the editor by disabling the Wind Simulation (map based) option. - The latitude of the map can be found in the Extended Debug Console with : Watch -> ace_common_maplatitude Have a nice day and a good game and, as usual, all kudos to the ACE3 Team and all contributors. Share this post Link to post Share on other sites
Laid3acK 79 Posted May 16, 2019 Hi all, an another quick update for the R3F weapons pack by the R3F team (links above) : [v1.2] : release 2019/05/16 - Compatibility with the CBA Joint Rails for all R3F scopes. - Fix the 5.56 Minimi silencer class name after the Arma3 1.92 update. - Fix the line thickness of the S&B P4FL reticle. - Add a new server key. - Add two missions by Ruthberg for testing the ballistics with the Eden Editor (included in the "docs" folder). - Normal conditions with AB enabled can be switched by disabling the ACE Weather option. - The wind can be managed in the editor by disabling the Wind Simulation (map based) option. - The latitude of the map can be found in the Extended Debug Console with : Watch -> ace_common_maplatitude - Add the OB50 reticle. 1 Share this post Link to post Share on other sites
Laid3acK 79 Posted October 7, 2019 Hello all, a little update for the R3F weapons pack by the R3F team : [v1.3] : release 2019/10/07 - Compatibility with the CBA Joint Rails for the R3F scopes, silencers and front rail items. - Partial compatibility with the BI's magazineWells and third mods' magazineWells (when possible with CUP, NIArms, RHS ...). - Ballistics improvement: initSpeed according with the Advanced Ballistics muzzle velocities at the normal conditions, all rifles and pistols have their own MVs now, the HK417 12" hasn't got the same MV than the 20" for example. - Dispersion reworked if necessary according with the new MVs. - Missing bipods icon in the inventory fixed. - Animated rechamber bolt action added with the FrF2, TAC50 and PGM Hécate 2, can be managed with the CBA Weapons Options (OPTIONS - ADDONS OPTIONS). - Proper cartridge ejection effect added with bolt action rifles. - mass, inertia, aimTransitionSpeed and dexterity updated according with the last BI values. Many, many thanks to the ACE3 Slack guys, especially Blutze and dahlgren for their help about the magazineWells functionality, the CBA team and commy2 for the Weapon Animations Framework and the great cartridge ejection effect, and toadie2k for the free anims from her AWM Source Material. Download : - Link STEAM WorkShop - Link MEGA As usual, tested alone as Single Player only (no MP), all feedback welcome. Good game. 🙂 Share this post Link to post Share on other sites
Laid3acK 79 Posted October 22, 2019 Hi all, an another little update for the R3F compat ACE3 : [1.4] : release 2019/10/22 - MRT Accessory Functions added for all R3F lampes and pointeurs items with a low luminosity level (default R3F), a high luminosity level (default vanilla Arma3) and the Ir laser, can be managed with the CBA Weapons Options (CONTROLS - CONFIGURE ADDONS). - R3F SCROME J8 and J10 illuminated MilDot reticle added with "la mini Chemlight à l'arrache dans la bonnette" effect. - A ZEISS fake : HENSOLDT 4-16x56 FF scope, used by the RAID (Recherche, Assistance, Intervention, Dissuasion), a special french Police counter terrorism unit. - Minor changes and fix. Download : - Link STEAM WorkShop - Link MEGA Tested alone as Single Player only (no MP), all feedback welcome. Good shot. 🙂 Share this post Link to post Share on other sites
Laid3acK 79 Posted November 5, 2019 Hello, tiny update : [v1.41] : release 2019/05/11 - Steam Mod picture reuploaded. - SCROME J10 and J8 MilDot updated. Download : - Link STEAM WorkShop - Link MEGA Have a nice day. 🙂 Share this post Link to post Share on other sites
Laid3acK 79 Posted February 27, 2020 Hi, another tiny update : [v1.42] : release 2020/02/27 - Fix the Nightforce NXS 5.5-22x56 Mil Dot calibration. - Add the Schmidt & Bender 5-25x56 PM II P3L reticle used by the french Air special forces CPA 10. Download : - Link STEAM WorkShop - Link MEGA Have a nice day. 🙂 1 Share this post Link to post Share on other sites
spotter001 82 Posted April 4, 2020 Hi! Can you just clarify, do i need to use ACE3 r3f_compat together with this addon? Thanks Share this post Link to post Share on other sites
Laid3acK 79 Posted April 5, 2020 Hello, you can play with or without ACE as your convenience. On 10/1/2018 at 1:17 PM, Laid3acK said: This little addon requires CBA, R3F ARMES and ACE3 , but can be played without ACE3 if the vanilla Arma 3 game is preferred. Share this post Link to post Share on other sites
Laid3acK 79 Posted April 5, 2020 13 hours ago, spotter001 said: Hi! Can you just clarify, do i need to use ACE3 r3f_compat together with this addon? Thanks Sorry, i just understand your question, you're talking about the @ace_compat_r3f to the ACE optionals folder, right ? No, you don't need this @ace_compat_r3f and it's not recommended to use the both at the same time. My apologies again for my misunderstanding. Share this post Link to post Share on other sites
spotter001 82 Posted April 5, 2020 2 hours ago, Laid3acK said: Sorry, i just understand your question, you're talking about the @ace_compat_r3f to the ACE optionals folder, right ? No, you don't need this @ace_compat_r3f and it's not recommended to use the both at the same time. My apologies again for my misunderstanding. Yes, exactly. ace_compat_r3f from the ACE3 optional folder. Ok, thanks for clarifying! And thanks for your work. 1 Share this post Link to post Share on other sites
Laid3acK 79 Posted April 9, 2020 Hello, little update : [v1.43] : release 2020/04/09 - Add a (dummy) bubble level to the military SCROME J10 as the real one. - Add a LRPS fake S&B 3-12x50 P3L reticle (double turn) used by the french special forces. - Fix the Hensoldt reticle calibration. - Update the J8/J10 Mildot, 22x MilR, 25x P4LF/P3L and the CQB 8x reticle calibration. - Minor update for the AtragMx presets and P4FL reticle reworked. Download : - Link STEAM WorkShop - Link MEGA Many thanks to the CBA Team, particularly to commy2 for his very useful debug reticle script. Take care of yourself. 🙂 Share this post Link to post Share on other sites
Laid3acK 79 Posted April 14, 2020 Hello, an update to fix my splendid mistakes : [v1.431] : release 2020/04/14 - Fix some "unknown author" and incorrect Eden Editor optic sights items. Download : - Link STEAM WorkShop - Link MEGA Sorry for the inconvenience. Share this post Link to post Share on other sites
Laid3acK 79 Posted August 13, 2020 Hello, a little update, mainly for the R3F TAC-50 : [v1.5] : release 2020/08/13 Update the TAC-50 Default and Advanced ballistics according with the McMillan Tactical Products specification (included in doc folder) : 12.7 AMAX, 2700 fps (gap default ballistic / AB : 0.1 mRad to 2100 m). Add a Nightforce NXS 8-32x56 according with the McMillan Tactical Products specification (included in doc folder) : NF Second Focal Plane Mil-Dot reticle calibrated 22x, magnification 8-22-32x, zeroing in-game 100 m. Update all Nightforce Field of View according with the official Nightforce documentation (included in doc folder). Update the M107 default ballistic, airFriction recalculated for a gap with AB : 0.1 - 0.2 mRad to 1600 m. Update the Hensoldt 4x and S&B 6x reticles. Update all scopes zeroing at 100 m, except the OB50 (300 m), the J4 (300 m) and the J10 (1300 m). Update the AtragMx presets. Download : - Link STEAM WorkShop - Link MEGA Have a nice day. 🙂 Share this post Link to post Share on other sites
Laid3acK 79 Posted January 4, 2021 Hello, little update for the new R3F Weapons pack 3.7.1 : [v1.6] : release 2021/01/04 Add the SCAR-H PR / TPR, SCAR-H STD, SCAR-L STD / CQC and the FN Mag 58 according with the official FN HERSTAL documentation. Add the MEN 7.62x56 FMJ and AP for the SCAR-H TP / TPR according with the french FPSA (DMR) program and the official MEN documentation. AtragMx Presets updated for the SCAR-H PR / TPR. airFriction, dispersion, initSpeed according with the Advanced Ballistics. Schmidt&Bender scope 1-8x24 PM II ShortDot Dual CC updated according with the official documentation. Download : - Link STEAM WorkShop - Link MEGA Many thanks to the R3F team for this great update and happy new year. 🙂 Share this post Link to post Share on other sites
Laid3acK 79 Posted January 15, 2021 Hi, a tiny update to fix my splendid mistake with the SCAR-H CQC barrel length : [v1.61] : release 2021/01/15 Fix the SCAR-H CQC barrel length according with the official FN HERSTAL documentation (airFriction, initSpeed and dispersion values according with the Advanced Ballistics). Update minor things, mainly the Inventory icons and some weapons maxZeroing values for the vanilla game. Download : - Link STEAM WorkShop - Link MEGA Have a nice day and take care of yourself. 🙂 1 Share this post Link to post Share on other sites
Laid3acK 79 Posted February 13, 2021 Hello, some reticles today : [v1.7] : release 2021/02/13 Add a S&B Shordot Dual CC MDR-T6 reticle (FFP 1xCC-4x-8x) calibrated according with the official S&B documentation (included in the docs folder). Add ELCAN SpecterDR 4x 5.56 and 7.62 military reticles according with the official Elcan documentation and ballistic patterns (included in the docs folder). Update the xml translations. Fix and update minor things. Download : - Link STEAM WorkShop - Link MEGA Again, many thanks to the CBA Team, especially commy2, for the Debug Reticle script. Have a good game and take care of yourself. 🙂 2 Share this post Link to post Share on other sites
Laid3acK 79 Posted April 7, 2021 Hello, little update because i wasn't happy with my Nightforce NXS Mil-Dot reticles. [v1.71] : release 2021/04/07 Fix lines and dots thickness for NXS reticles Mil-Dot 15x / 22x according with the Nightforce documentation (docs folder). Fix the coordinates and scale of the Glock silencer icon in the inventory. Fix the R3F_30Rnd_556x45_TRACER_SCAR inherited from the vanilla 30Rnd_556x45_Stanag. Update the NXS MIL click values according with the Nightforce USA catalog 2011 (docs folder). Update the .xml translation. Revert to 500 meters the NXS 8-32 and 12-42x56 zeroing (AtragMx Zero Range will need to be updated). Download : - Link STEAM WorkShop - Link MEGA Have a nice day and take care of yourself. 🙂 Share this post Link to post Share on other sites
Laid3acK 79 Posted March 11, 2022 Hello everyone, a little update for the new R3F Armes 3.7.4 : [v1.8] : release 2022/03/11 Add ACE3 default and advanced ballistics compatibility for the updated @R3F Armes 3.7.4: HK416F, HK416A5, FN MINIMI, HK MP7A2 and PGM ULTIMA RATIO according to manufacturers datas. Add an AP 4.6x30 DM 11 according to the RUAG documentation (docs folder). Add an AP 12.7x99 HC SX according to the RUAG documentation (docs folder). Add a Hornady subsonic 9x19 147gr for the HK MP5SD3 (Hornady and Strelok Pro datas). Add a Lapua subsonic 7.62x56 200gr for FRF2, HK417 and SCARH (Lapua and Strelok Pro datas). Add 5.56, 7.62 and 12.7 tracers and dim tracers ammunitions ("tracerScale", "tracerStartTime" and "tracerEndTime" according to Nammo datas, times of flight from Strelok Pro). Add a Schmidt&Bender MilDot CC reticle for the 1-8x24 PMII ShortDot Dual CC according to the S&B documentation (docs folder). Improve all "airFriction" calculated with the ACE3 Ruthberg generate_airfriction_config tool according to the advanced ballistics values (airFrictionAnalysis.txt in docs folder). Improve 4.6x30, 9x19, 5.56x45, 7.62x51 and 12.7x99 "caliber" with the BI "*.bisurf" (data_f\penetration), the official Arma 3 penetration formula and the official Arma 3 Diagnostics Exe ("Shots") according to FN Herstal, General Dynamics Ordnance and Tactical Systems, MEN, Nammo and RUAG datas. Improve 4.6x30, 9x19, 5.56x45, 7.62x51 "hit" according to the NIJ Body Armor Classification. Update AtragMx presets (calibrated with Strelok Pro). Update the stringtable.xml (translations). Update SCROME J8 / J10 and S&B MDR-T6 reticles. Update all mass according to ACE3 (will be eventually necessary to check loadouts). Update the commented config.cpp (docs folder). Download : - Link STEAM WorkShop - Link MEGA Many thanks to the R3F team for this great update. A nice day and take care of yourself. 🙂 Share this post Link to post Share on other sites
