LSD_Timewarp82 21 Posted July 4, 2014 I just wanted to ask what could create the issue that my character didnt die when i´ll get killed in an Air vehicle playing an User mission. Even when my Jet hits the ground an explodes i am alive and able to get out of the Jet after the vehicle isnt moving anymore. I play with many mods, would be great if someone could give me a suggestion what i have to search in the configs to find out what causes this issue. I have this effect only in Aircrafts (Helos and Jets) other vehicles are fine. Thx in advancefor any help (happens to me in Stable and Devbranch) Share this post Link to post Share on other sites
maddogx 13 Posted July 4, 2014 (edited) Nothing to do with dev branch, nor with any specific mod (at least until the culprit has been identified) so I've moved this to troubleshooting for now. :) Anyway it sounds like either allowDamage false or a wonky HandleDamage EH is being used somewhere. ... I play with many mods ... It's doubtful that you'll be able to find the cause of this issue by looking at the mod code, especially with a large number of mods. You could conceivably grep for those two commands if you feel like installing some software, but that will probably produce a lot of false positives for you to dig through. Otherwise, I would suggest the following "trial and error" approach: 1. Remove mods, test in-game. Problem should be gone. 2. Put about half of the mods back in, test in-game. 2.a - Still no problem? Remove those mods again and put them somewhere else, perhaps in a folder called "ok". Then try the other half of the mods. 2.b - Problem has returned? Then one mod in this batch is the culprit. Go back to step one with this batch of mods. (I.e. remove half of them, test again.) Keep putting "untainted" mods aside and eventually you should have whittled down your list of potentially problematic mods to a single one. Edited July 4, 2014 by MadDogX Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 4, 2014 Ok, thanks for the suggestion, better i start now to test and sort out, have ~50 mods active. In my Logic such issue could injected due a mod wich adds Aircrafts or a medical system, am i right? And whats with the rpt.log? Shouldnt it stand in the log with the issue? Share this post Link to post Share on other sites
maddogx 13 Posted July 4, 2014 Ok, thanks for the suggestion, better i start now to test and sort out, have ~50 mods active.In my Logic such issue could injected due a mod wich adds Aircrafts or a medical system, am i right? Yes to both. Definitely try removing those first, then (if the problem disappears) plug them back in one by one. Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 4, 2014 Yes to both. Definitely try removing those first, then (if the problem disappears) plug them back in one by one. Do you have basic knowledge in the mods posted in here in the forums? Maybe you could help me a lot when you put an eye on my modlist, want give it a try? Share this post Link to post Share on other sites
maddogx 13 Posted July 4, 2014 Do you have basic knowledge in the mods posted in here in the forums? Nope. Maybe you could help me a lot when you put an eye on my modlist, want give it a try? Just post the list (in spoiler tags). I'm probably not the only person who will read this thread. Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 4, 2014 Ok, here is the list, i think i´ll start to disable Aircraft mods like "STI" (it´s the A10) and Su35 Flanker Share this post Link to post Share on other sites
HazJ 1289 Posted July 4, 2014 Just a stupid wild guess here but, I see you have @fhq_debug active so open it up in-game and enter the following command. Once you have done this, disable/remove @fhq_debug to see if that fixes it. player allowDamage true; Again, this is just a stupid wild guess which probably won't help or do anything but it's worth a shot, right? :D Maybe also put the above command in the BIS debug console as well... Also, what user mission are you trying this with? :) Dirty Haz Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 4, 2014 Just a stupid wild guess here but, I see you have @fhq_debug active so open it up in-game and enter the following command. Once you have done this, disable/remove @fhq_debug to see if that fixes it.player allowDamage true; Again, this is just a stupid wild guess which probably won't help or do anything but it's worth a shot, right? :D Maybe also put the above command in the BIS debug console as well... Also, what user mission are you trying this with? :) Dirty Haz Hey, thanks for the suggestion, i will try it in a few minutes, hope this is the solution ^^ I play only WholeLottaAltis by SaOk, it my favorite mission on Arma3 Share this post Link to post Share on other sites
maquez 141 Posted July 4, 2014 (edited) found two probably conflicting mods @TPW_Mods and @Ragdoll'd .... TPW has TPW_Falls which does the same as ragdoll'd if you prefer ragdoll'd remember to disable TPW_Fall ;) but newest TPW_Fall is sweet :o Edited July 4, 2014 by maquez Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 4, 2014 found two probably conflicting mods@TPW_Mods and @Ragdoll'd .... TPW has TPW_Falls which does the same as ragdoll'd if you prefer ragdoll'd remember to disable TPW_Fall ;) but newest TPW_Fall is sweet :o Such things i am aware of, i have following things active at TPW: Fog,Houselights,Bleedout,HUD and Fall, BUT i play with disabled Options of "Player Fall" and "Ragdoll".. I have only "Bullet Reaction active in the TPW_Fall section :) Just a stupid wild guess here but, I see you have @fhq_debug active so open it up in-game and enter the following command. Once you have done this, disable/remove @fhq_debug to see if that fixes it.player allowDamage true; Again, this is just a stupid wild guess which probably won't help or do anything but it's worth a shot, right? Maybe also put the above command in the BIS debug console as well... Also, what user mission are you trying this with? Dirty Haz Tried that, didnt work. Thanks anyway :) Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 5, 2014 Reduced modlist to this, problem still present (player allowDamage true; didnt help in this case) Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 5, 2014 Other suggestions? Share this post Link to post Share on other sites
gliptal 25 Posted July 5, 2014 What is mcc_sandbox? The name implies some type of free-from-consequences gameplay, some damage modifications may come with it. Also check bCombat parameters in its .sqf, there are a couple that alter how damage is dealt. Yay! Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 5, 2014 Well, MCC is the mission maker tool by Shay_gman, Spirit & Psycho http://forums.bistudio.com/showthread.php?150909-MCC-Sandbox-3-Dynamic-mission-creating-tool-for-ArmA-3 . I use it only to spawn crates and vehicles during the mission (always empty vehicles, i didnt spawn AI Units with it) Can you tell me for which parameter i have to look at in bCombat? I ve just downloaded your new .jar file for bcombat, are those parmaters in there? Share this post Link to post Share on other sites
gliptal 25 Posted July 5, 2014 Sure, all parameters can be found there. Chel DAMAGE MULTIPLIER under CORE OPTIONS. Yay! Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 5, 2014 Okay, which values should i use there? Remember: SaOks WLA Mission is running a respawn script, so when you get killed you will respawn in the area you were killed. Share this post Link to post Share on other sites
gliptal 25 Posted July 5, 2014 Shouldn't be 0. Yay! Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 5, 2014 Ok i will try it with the default "Damage Multiplier", it is set to 1.0 Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 6, 2014 Problem still exists, coudnt manage to figure out what is creating this issue :( Share this post Link to post Share on other sites
gliptal 25 Posted July 7, 2014 Let's use some good old divide et impera to solve this. Activate all mods: how many do you have (CBA excluded)? Yay! Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 7, 2014 (edited) Hi Gliptal, actually using 39 mods for SaOks mission :o (if this helps: when i hit the ground with the jet and it expodes i need a minimum of 3 medipacks to heal me and the healstar stops popping on the screen. I tried without bleeding mod but that didnt solve the issue) Edited July 7, 2014 by LSD_Timewarp82 Share this post Link to post Share on other sites
gliptal 25 Posted July 7, 2014 Ok then disable the first 20 mods and test. Is the problem still there? Leave CBA always enabled through all these tests. Yay! Share this post Link to post Share on other sites
LSD_Timewarp82 21 Posted July 7, 2014 Is it possible that this issue comes from his mission? Cause when i play in the editor (empty map) and i crash the jet or heli i die normally. And i have the same mods activated as i would play his mission Share this post Link to post Share on other sites
gliptal 25 Posted July 7, 2014 Then it's the mission. 100%. Yay! Share this post Link to post Share on other sites