Mattaus 10 Posted July 29, 2011 Ok I have made a offshore rig. It works fine but 1 problem. (This is for RP) When you drive under the oilrig on the water, and get out to climb the ladder, you get out of the boat and then you get placed ontop of the oilrig (The top section, not underneath where I should be) Also I cannot enter the boat again once it's underneath the oilrig. I tried placing paths instead of roadways for the LOD which fixed the issue, but another issue occurred which was worse, that you swim on the oilrig, not walk. any clues, and I'd be grateful, Cheers, Matt. Share this post Link to post Share on other sites
[aps]gnat 28 Posted July 30, 2011 Standard game behaviour/bug. When you get out of a vehicle the soldier is automaticly placed (to start with) on top of the nearest ROADWAY LOD, no matter if its low or very high (like carriers) Yes, you have to have ROADWAY lods. Share this post Link to post Share on other sites
Mattaus 10 Posted August 1, 2011 Ok then thanks, Also; When you angle yourself high enough in the sky (70 degrees), the whole oilrig will become invisible, (This issue maybe because of the polycount but am unsure). Share this post Link to post Share on other sites
[aps]gnat 28 Posted August 1, 2011 Could be. But most likely its because your model is larger than 50 meters. Share this post Link to post Share on other sites
Mattaus 10 Posted August 2, 2011 Oh really... Hmm I'll have to check on that, I just scale it down to something abit smaller and see. Share this post Link to post Share on other sites
max power 21 Posted August 2, 2011 You may also be able to break it into sections and use proxies. Share this post Link to post Share on other sites