3inar 10 Posted January 10, 2010 ok so I basicly am trying to learn how to gett this to work... have looked at this>>(http://community.bistudio.com/wiki/Construction_Interface) page many times but I just dont gett what I am suposed to do... I gues I am suposed to putt the lines and sutch in the buildings init as far as I have understodd it, and put the name of the kind of units I whant to be able to be bought in that building,? Be gentel I am verry begginer with this :) Also I got a question adding to my quesstion, Is there any way to make the AI to build upp there own camp from scratch?(that mening starting with 0 buildings and then build there way upp) then go on a hunt for enemies Automaticly? or am I just dreaming here with my extra question? Best wishes ///3inar :) Share this post Link to post Share on other sites
lucilk 10 Posted January 11, 2010 :D nothing is imposible in arma 2, at least not from what i encountered, listen take this example, research it and you will figure out what and how to do it, basically you need a warfare a simple warfare to make ai build bases. here is the example http://forums.bistudio.com/showthread.php?t=91022 good luck Share this post Link to post Share on other sites
3inar 10 Posted January 11, 2010 (edited) :D nothing is imposible in arma 2, at least not from what i encountered, listen take this example, research it and you will figure out what and how to do it, basically you need a warfare a simple warfare to make ai build bases.here is the example http://forums.bistudio.com/showthread.php?t=91022 good luck ok got another question, how wold I change how mutch the units cost? think I figured out how to change buildings cost but dont know about units, do you have to sync the units to there respective building in any way and in that case how? Thanks :) Edit: seemes like i dident know what I was doing :/, still cant make custom prices for different buildings and units :( Edited January 11, 2010 by 3inar Share this post Link to post Share on other sites
MH6 11 Posted January 12, 2010 Here's an example script for adding custom buildings to the Construction Interface. Replace the third element in the array (i.e. 100, or 10) with the price you want that building to be. Then you just call this script from the init field of the COIN module. (i.e. _handle = [this] execVM "scripts\setupCOIN.sqf"; ) _module = _this select 0; //Set the categories //These will be used by each building as well _module setvariable ["BIS_COIN_categories",["Buildings","Defense","Barriers","Sandbag Barriers","Fortifications","Ammunition Crates","Other"]]; //Populate BIS_COIN_items array _module setvariable ["BIS_COIN_items",[ //Format each entry like so: //[Name of Building, Name of Category, Price of Building], ["USMC_WarfareBVehicleServicePoint","Buildings",100], //["USMC_WarfareBAircraftFactory","Buildings",100], //["USMC_WarfareBArtilleryRadar","Buildings",100], ["USMC_WarfareBAntiAirRadar","Buildings",100], ["USMC_WarfareBBarracks","Buildings",100], ["MASH","Buildings",100], //["USMC_WarfareBHeavyFactory","Buildings",100], //["LAV25_HQ_unfolded","Buildings",100], //["USMC_WarfareBLightFactory","Buildings",100], ["USMC_WarfareBUAVterminal","Buildings",100], ["WarfareBAirport","Buildings",100], ["Barrack2","Buildings",100], ["Land_Hangar_2","Buildings",100], ["Land_Antenna","Buildings",100], ["WarfareBCamp","Buildings",100], ["USMC_WarfareBMGNest_M240","Defense",100], ["Stinger_Pod","Defense",100], ["M119","Defense",100], ["M252","Defense",100], ["MK19_TriPod","Defense",100], ["TOW_TriPod","Defense",100], ["M2StaticMG","Defense",100], ["M2HD_mini_TriPod","Defense",100], ["SearchLight_CDF","Defense",100], ["Base_WarfareBBarrier10xTall","Barriers",100], ["Base_WarfareBBarrier10x","Barriers",100], ["Base_WarfareBBarrier5x","Barriers",100], ["Land_HBarrier5","Barriers",100], ["Land_Hbarrier_large","Barriers",100], ["Land_HBarrier3","Barriers",100], ["Land_HBarrier1","Barriers",100], ["Hedgehog","Barriers",100], ["Fort_RazorWire","Barriers",100], ["Land_BarGate2","Barriers",100], ["Land_ConcreteBlock","Barriers",100], ["Land_CncBlock","Barriers",100], ["Land_BagFenceLong","Sandbag Barriers",100], ["Land_BagFenceShort","Sandbag Barriers",100], ["Land_BagFenceCorner","Sandbag Barriers",100], ["Land_BagFenceRound","Sandbag Barriers",100], ["Land_BagFenceEnd","Sandbag Barriers",100], ["Land_fort_bagfence_long","Sandbag Barriers",100], ["Land_fort_bagfence_corner","Sandbag Barriers",100], ["Land_fort_bagfence_round","Sandbag Barriers",100], ["Land_fortified_nest_big","Fortifications",100], ["Land_fortified_nest_small","Fortifications",100], ["Land_Fort_Watchtower","Fortifications",100], ["Land_fort_rampart","Fortifications",100], ["Land_fort_artillery_nest","Fortifications",100], ["USBasicAmmunitionBox","Ammunition Crates",10], ["USLaunchersBox","Ammunition Crates",10], ["USOrdnanceBox","Ammunition Crates",10], ["USBasicWeaponsBox","Ammunition Crates",10], ["USSpecialWeaponsBox","Ammunition Crates",10], ["USVehicleBox","Ammunition Crates",10], ["FlagCarrierUSA","Other",10], ["HeliHRescue","Other",10], ["HeliHCivil","Other",10], ["HeliH","Other",10], ["Land_CamoNet_NATO","Other",10], ["Land_CamoNetVar_NATO","Other",10], ["Land_CamoNetB_NATO","Other",10], ["Camp","Other",10], ["Land_Toilet","Other",10], ["Fence_corrugated_plate","Other",10] ]]; //End BIS_COIN_items Array Hopefully the comments in the script are enough for you to go by? Share this post Link to post Share on other sites
3inar 10 Posted January 12, 2010 Hmm.. I am doing something wrong I think, when I try to start my mission it says script not found :/ and sometimes when I try the misson wont even start :/ just sitts at the loading screen :( I make a script with the codes you gave me (sqf script) dont know what im doing wrong :/ Here's an example script for adding custom buildings to the Construction Interface. Replace the third element in the array (i.e. 100, or 10) with the price you want that building to be. Then you just call this script from the init field of the COIN module.(i.e. _handle = [this] execVM "scripts\setupCOIN.sqf"; ) _module = _this select 0; //Set the categories //These will be used by each building as well _module setvariable ["BIS_COIN_categories",["Buildings","Defense","Barriers","Sandbag Barriers","Fortifications","Ammunition Crates","Other"]]; //Populate BIS_COIN_items array _module setvariable ["BIS_COIN_items",[ //Format each entry like so: //[Name of Building, Name of Category, Price of Building], ["USMC_WarfareBVehicleServicePoint","Buildings",100], //["USMC_WarfareBAircraftFactory","Buildings",100], //["USMC_WarfareBArtilleryRadar","Buildings",100], ["USMC_WarfareBAntiAirRadar","Buildings",100], ["USMC_WarfareBBarracks","Buildings",100], ["MASH","Buildings",100], //["USMC_WarfareBHeavyFactory","Buildings",100], //["LAV25_HQ_unfolded","Buildings",100], //["USMC_WarfareBLightFactory","Buildings",100], ["USMC_WarfareBUAVterminal","Buildings",100], ["WarfareBAirport","Buildings",100], ["Barrack2","Buildings",100], ["Land_Hangar_2","Buildings",100], ["Land_Antenna","Buildings",100], ["WarfareBCamp","Buildings",100], ["USMC_WarfareBMGNest_M240","Defense",100], ["Stinger_Pod","Defense",100], ["M119","Defense",100], ["M252","Defense",100], ["MK19_TriPod","Defense",100], ["TOW_TriPod","Defense",100], ["M2StaticMG","Defense",100], ["M2HD_mini_TriPod","Defense",100], ["SearchLight_CDF","Defense",100], ["Base_WarfareBBarrier10xTall","Barriers",100], ["Base_WarfareBBarrier10x","Barriers",100], ["Base_WarfareBBarrier5x","Barriers",100], ["Land_HBarrier5","Barriers",100], ["Land_Hbarrier_large","Barriers",100], ["Land_HBarrier3","Barriers",100], ["Land_HBarrier1","Barriers",100], ["Hedgehog","Barriers",100], ["Fort_RazorWire","Barriers",100], ["Land_BarGate2","Barriers",100], ["Land_ConcreteBlock","Barriers",100], ["Land_CncBlock","Barriers",100], ["Land_BagFenceLong","Sandbag Barriers",100], ["Land_BagFenceShort","Sandbag Barriers",100], ["Land_BagFenceCorner","Sandbag Barriers",100], ["Land_BagFenceRound","Sandbag Barriers",100], ["Land_BagFenceEnd","Sandbag Barriers",100], ["Land_fort_bagfence_long","Sandbag Barriers",100], ["Land_fort_bagfence_corner","Sandbag Barriers",100], ["Land_fort_bagfence_round","Sandbag Barriers",100], ["Land_fortified_nest_big","Fortifications",100], ["Land_fortified_nest_small","Fortifications",100], ["Land_Fort_Watchtower","Fortifications",100], ["Land_fort_rampart","Fortifications",100], ["Land_fort_artillery_nest","Fortifications",100], ["USBasicAmmunitionBox","Ammunition Crates",10], ["USLaunchersBox","Ammunition Crates",10], ["USOrdnanceBox","Ammunition Crates",10], ["USBasicWeaponsBox","Ammunition Crates",10], ["USSpecialWeaponsBox","Ammunition Crates",10], ["USVehicleBox","Ammunition Crates",10], ["FlagCarrierUSA","Other",10], ["HeliHRescue","Other",10], ["HeliHCivil","Other",10], ["HeliH","Other",10], ["Land_CamoNet_NATO","Other",10], ["Land_CamoNetVar_NATO","Other",10], ["Land_CamoNetB_NATO","Other",10], ["Camp","Other",10], ["Land_Toilet","Other",10], ["Fence_corrugated_plate","Other",10] ]]; //End BIS_COIN_items Array Hopefully the comments in the script are enough for you to go by? Share this post Link to post Share on other sites
MH6 11 Posted January 12, 2010 Hmm.. I am doing something wrong I think, when I try to start my mission it says script not found :/ and sometimes when I try the misson wont even start :/ just sitts at the loading screen :(I make a script with the codes you gave me (sqf script) dont know what im doing wrong :/ That means the path is probably wrong. Did you put the script I posed into a file called setupCOIN.sqf in the scripts subfolder of the map? Share this post Link to post Share on other sites
3inar 10 Posted January 12, 2010 (edited) That means the path is probably wrong. Did you put the script I posed into a file called setupCOIN.sqf in the scripts subfolder of the map? I did, think Ive had this problem with other scripts to just cant remember what I did then :/ I put them in: Mina dokument(my documents)\ArmA 2\missions\Constructor%20interface.utes\Scripts Edited January 13, 2010 by 3inar Share this post Link to post Share on other sites
