ALRMatty 1 Posted September 30, 2012 (edited) Hey Guys, Our server seems to be having a problem where the players on the server come to a halt and either run on the spot or freeze, similar to DESYNC. Except this does not go away, I have to restart the server. Here are a few main error messages that are occuring out of the .RPT file. 2012/09/30, 7:59:09 Ref to nonnetwork object 277562: <no shape> 2012/09/30, 7:23:24 Warning: UV coordinate on point 657 is too big UV(-291.717957, -593.291870) - the UV compression may produce inaccurate results 2012/09/29, 12:57:28 Server: Network message 1997123 is pending Full .RPT file will be pasted below. We average about 30 players on the server a night, I have noticed once the server seems to get a load it tends to crash/desync/freeze. We have tried using a non-addon vanilla mission and it still crashed, we have upgraded hardware and switched server hosts. I was wondering if this may be a arma2.cfg (basic.cfg) issue. If so could someone provide us with a .cfg file to try. This has been going on for about a month and a half now and is jeopardising our playerbase. Thanks in Advance, Matty ---------- Link to .RPT and pasted basic.CFG ---------- ARMA2OASERVER.RPT http://720industries.com/downloads/arma2oaserver.RPT basic.cfg (arma2.cfg) /* Bandwidth the server is guaranteed to have (in bps). This value helps server to estimate bandwidth available. Increasing it to too optimistic values can increase lag and CPU load as too many messages will be sent but discarded. Default: 131072 */ MinBandwidth=10000000; /* Bandwidth the server is guaranteed to never have. This value helps the server to estimate bandwidth available. */ MaxBandwidth=2147483647; /* Maximum number of messages that can be sent in one simulation cycle. Increasing this value can decrease lag on high upload bandwidth servers. Default: 128 */ MaxMsgSend = 128; /* Maximum size of guaranteed packet in bytes (without headers). Small messages are packed to larger frames. Guaranteed messages are used for non-repetitive events like shooting. Default: 512 */ MaxSizeGuaranteed = 1024; /* Maximum size of non-guaranteed packet in bytes (without headers). Non-guaranteed messages are used for repetitive updates like soldier or vehicle position. Increasing this value may improve bandwidth requirement, but it may increase lag. Default: 256 */ MaxSizeNonguaranteed = 64; /* Minimal error to send updates across network. Using a smaller value can make units observed by binoculars or sniper rifle to move smoother. Default: 0.01 */ MinErrorToSend = 0.0040000002; /* Users with custom faces or custom sounds larger than this size are kicked when trying to connect. Use this wisely as it can be the cause of alot of Join in Progress lag. 1600000 = 160k */ MaxCustomFileSize=0; // EOF Edited September 30, 2012 by ALRMatty Share this post Link to post Share on other sites
Gunter Severloh 3965 Posted September 30, 2012 Hello ALRMatty Welcome to BIS forums. Sorry to read about your server troubles, I may attempt to help but I am no expert, I do have experience with several gameservers over the years, so I will give you what I can. My suggestion for basic.cfg is review this page: basic.cfg http://community.bistudio.com/wiki/basic.cfg and apply the settings accordingly as suggested. I would also suggest remove any mods, and run the vanilla game and see how that runs, then go from there. About where i would start if i had server issues, hope that helps. Share this post Link to post Share on other sites
ALRMatty 1 Posted September 30, 2012 Hello ALRMatty Welcome to BIS forums.Sorry to read about your server troubles, I may attempt to help but I am no expert, I do have experience with several gameservers over the years, so I will give you what I can. My suggestion for basic.cfg is review this page: basic.cfg http://community.bistudio.com/wiki/basic.cfg and apply the settings accordingly as suggested. I would also suggest remove any mods, and run the vanilla game and see how that runs, then go from there. About where i would start if i had server issues, hope that helps. Thanks for suggesting that, We have tried running Vanilla and with no-mods, including trying multiple configs. I think my server configs need to be tuned by someone with the expertise as I barely have a clue. Share this post Link to post Share on other sites
ALRMatty 1 Posted September 30, 2012 2012/09/30, 12:16:46 Server: Network message 1400964 is pending 2012/09/30, 12:16:46 Server: Network message 1400964 is pending 2012/09/30, 12:16:46 Server: Network message 1400964 is pending 2012/09/30, 12:27:22 NetServer::finishDestroyPlayer(527000131): DESTROY immediately after CREATE, both cancelled 2012/09/30, 12:28:30 NetServer::finishDestroyPlayer(728046966): DESTROY immediately after CREATE, both cancelled 2012/09/30, 12:30:34 NetServer::finishDestroyPlayer(1300112696): DESTROY immediately after CREATE, both cancelled New Errors! Yeehaa! Share this post Link to post Share on other sites
Gunter Severloh 3965 Posted October 1, 2012 What missions are you guys running when the problems start, or occur? australianlife? also Your startup from the RPT: ===================================================================== == C:\ClientInstalls\ASHLEYF\GameServers\TC86460810544052382183627\arma2oaserver.exe == "C:\ClientInstalls\ASHLEYF\GameServers\TC86460810544052382183627\arma2oaserver.exe" -mod=arma2;expansion;ca;@AustralianLifeRelived -config=server.cfg -port=2302 -profiles=C:\ClientInstalls\ASHLEYF\GameServers\TC86460810544052382183627\ -name=server -maxplayers=32 ===================================================================== What is this number TC86460810544052382183627 your game key? ID? This is also a good reference: http://www.kellys-heroes.eu/files/tutorials/dedicated/ You should ask kelly's heroes they are pretty keen on how to run a dedicated server. Another reference: http://community.bistudio.com/wiki/ArmA:_Dedicated_Server Share this post Link to post Share on other sites
Tom_48_97 523 Posted October 1, 2012 What are the server's specs? (cpu/ram/bandwidth...) Share this post Link to post Share on other sites
Gunter Severloh 3965 Posted October 1, 2012 (edited) Good question tom, I forgot to ask that myself, but it could be possible with 30+ players on it the computer might not be able to handle the load. @Matty Was the server running ok before this, or was it always doing this and for how long, have you ever been able to play? edit wanted to add, Matty have you tried: Tophie's server tool? http://www.armaholic.com/page.php?id=11655 Edited October 1, 2012 by Gnter Severloh Share this post Link to post Share on other sites
ALRMatty 1 Posted October 1, 2012 Good question tom, I forgot to ask that myself, but it could be possible with 30+ players on it the computer might not be able to handle the load. @Matty Was the server running ok before this, or was it always doing this and for how long, have you ever been able to play? edit wanted to add, Matty have you tried: Tophie's server tool? http://www.armaholic.com/page.php?id=11655 Hey Guys, Thanks for the replies. TC49249195491549 Blah blah is the Server box number. This server is rented and we run it off Control Panel. We have also used a Dedicated box beforehand and recieved the same issue. We have unlimited bandwidth as we are with Hypernia and are hosted in Australia. Share this post Link to post Share on other sites
Tom_48_97 523 Posted October 1, 2012 (edited) Well, it doesn't change my question about server's specs. Because, you can have an unlimited traffic, but you'll still limited by the physical connection. If I understand well, you use a virtualized server right? MinBandwidth=10000000;MaxBandwidth=2147483647; It supposes that you've got a minimal bandwidth of 1.19MB/s (that's not huge), but also you've got a max bandwidth of 255MB ! That last number is really huge! I'm not sure this one is good, try to turn it into a realistic value, according to you server's specs. (btw I hope I'm not wrong with the conversions ^^) Edited October 1, 2012 by tom_48_97 Share this post Link to post Share on other sites
ALRMatty 1 Posted October 2, 2012 Tonight the server has crashed about 4-5 times. I tried lowering the min bandwidth and ill keep you informed. The server seems to have some kind of Join In Progress lag. Does anyone know how i can fix this, as I noticed the server seems to lag/desync/crash when it has some people connecting. Share this post Link to post Share on other sites
Gunter Severloh 3965 Posted October 2, 2012 Matty I'd suggest contacting, or posting in the Kelly's heroes forums: http://www.kellys-heroes.eu/forum/viewforum.php?f=37 they know their way around servers pretty well. Share this post Link to post Share on other sites