cross

I believe only 1.2 stable has direct dl mirrors. You can use Yoma's AddonSync and use our ACE Repos to download, or other mirrors here -> http://ace.dev-heaven.net/wagn/Download Our repo link is in my sig. Download & Install latest YAS -> http://dev-heaven.net/projects/yoma-addonsync2009/files double click yashttp://www.kellys-heroes.eu/Server.yas double click ACE repo click on download addons tab check addons and download.

Well...your eyes can hardly tell the difference after 30 fps. You need to set your video settings well and not be over ambitious. I play all @high + terrain@normal and PP&AA@low + VD=4000 with 8800 GTS. ArmA is not designed to be as FPS and neither needs omfg-uber-1337-1500 fps for pwning-DM. Actually all you need is steady 30-40 FPS with a proper Gfx Card. Most of my clan mates run OA with 40-60 FPS with i7s and latest graphics cards. If you cant, gotta check your win & arma settings. ;) The thread is about betapatch...forget about what I write, tell what problems/improvements you see with this beta.

Runs really smooth even with 23-30 fps on my Win7-x64 i7-950 Trees, as said above, looks like water paint in the distance...gets OK as you get closer though. I prefer performance > nicer trees. Upward recoil is a bit too much. You need to adjust your mouse after 7-6 single shots. Shooting FN-FAL standing is like shooting MG from the hip :D. The need to re-aim is clear but aiming in PC is already a hard job, so I believe it should be lowered a bit to somewhere in between original OA and BetaOA. I had some micro-stutter, I see that it is gone now ... so gj Are there any changes in the oaserver.exe? Or is it the same as previous ?

Kellys ACE Server & YAS Repo updated to ACE b.373 **Kelly's Heroes ACE2 YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2ACE-Repository/ArmA2ACE-Repo.7z **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively you can click on this link to access KH Repos -> yashttp://www.kellys-heroes.eu/Server.yas Note that the URLs above are case-sensitive so pls make sure you entered exactly as provided above. YAS users: Do not forget to remove extra files through YAS.

hi Xeno, Can you please post here when you release an update officially..to avoid hotfixes etc.. Thanks Cross

It clears part of the memory Arma2 uses iirc. Try using it if your game slows down after some time, the FPS goes down and your soldier becomes less responsive & movements are not as smooth as you started. usage press Shift & Num- type flush ( note you will not see it ) You get the activating flush message on your screen.

Our Operation Arrowhead Server is up and running. Arma2 Arrowhead Server: 78.129.202.206:2302 Arma2 ACE2 Game Server: 78.129.202.206:2502 Teamspeak 3: kellys-heroes.eu:9987 TS Password: bigjoe Kelly's Heroes Yoma AddonSync ACE2 and CommunityMods Repos **ACE2 AddonSync Repo AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2ACE-Repository/ArmA2ACE-Repo.7z **COMMUNITY AddonSync Repo AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Also click on this to access KH Repos-> yashttp://www.kellys-heroes.eu/Server.yas For more info on AddonSync, usage and KH-Repos-> http://www.kellys-heroes.eu/forum/viewtopic.php?f=40&t=3212 .

yes OA seems to slow down after some time (low FPS and refresh) and it goes back to normal after flushing (shift minus + flush). Mostly happened in boot camps..did not try the campaign yet

Hi Terp, Updated BWMod to 1.7 in the KH Community Repo...will be activated later today. **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively, as an easier method, you can click on this link to access both KH Repos directly from YAS -> Kelly's AddonSync Repos

Nice island. Added to KH Community Repo...will be activated tonite. **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively, as an easier method, you can click on this link to access both KH Repos directly from YAS -> Kelly's AddonSync Repos

Updated the Duala in KH Community Repo to 1.7 **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively, as an easier method, you can click on this link to access both KH Repos directly from YAS -> Kelly's AddonSync Repos

Is there any info on how to run the Arma2 & OA combined dedi-server? At the moment we are using 1.07 Arma2Server.exe with -mod=Expansion which seemed to be the most logical method for dedi server purposes. Is this the way to go or should we consider using OA.exe with -server option or expect a separate OAServer.exe for combined operations?

Hey ... Great initiative implementing faceAPI ;) I've successfully ran the app and in A2 too with Microsoft VX-3000 cam. What I noticed was for me both the default and Arma settings were too wobbly. Especially zoom in/out and roll was very hard to control. To those who can't seem to gain control or who don't feel comfortable, I recommend to zero all settings and start adding yaw first, then some pitch then minimal Z (zoom) and X (lean) Here are my settings which I find playable. I dont use roll or Y axis, which makes your soldier lean all the time. [Tracking] Smooth=10 NeutralZone=4 sensYaw=184 sensPitch=41 sensRoll=0 sensX=42 sensY=0 sensZ=21 invertYaw=false invertPitch=false invertRoll=false invertX=true invertY=false invertZ=false useEWMA=true redYaw=40 redPitch=15 redRoll=0 redX=31 redY=0 redZ=22 [GameProtocol] Selection=0 very nice job...

After you sync with the repo server properly, you should remove files marked as local new.

Kellys ACE Server & YAS Repo updated to ACE b.371 **Kelly's Heroes ACE2 YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2ACE-Repository/ArmA2ACE-Repo.7z **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively you can click on this link to access KH Repos -> yashttp://www.kellys-heroes.eu/Server.yas Note that the URLs above are case-sensitive so pls make sure you entered exactly as provided above. YAS users: Do not forget to remove extra files through YAS.

Do not worry about the CA. Just ignore it. And this is not the troubleshooting section :P

Congrats on the release ASZ... Please consider signing them with Pedagne_b01. I can do it for you if you want. I've added PadagneMod_b01 to our Kellys Community YAS Repo. It's being uploaded. **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively, as an easier method, you can click on this link to access both KH Repos directly from YAS -> Kelly's AddonSync Repos Note that the URLs above are case-sensitive.

Kellys ACE Server & YAS Repo updated to ACE b.356 **Kelly's Heroes ACE2 YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2ACE-Repository/ArmA2ACE-Repo.7z **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively you can click on this link to access both Repos directly from YAS-> Kelly's AddonSync Repos Note that the URLs above are case-sensitive so pls make sure you entered exactly as provided above. Do not forget to remove extra files through YAS.

I'd suggest you issue new privatekeys for each island and version like.. ibr_duala_15 ibr_jade_09b ibr_panthera_261 so that when you update one island, you'll need to resign that island only. For example when you update duala to 1.6, you issue a new signature ibr_duala_16 and sign it with it so that server admins will remove the ibr_duala_15.bikey and add ibr_duala_16.bikey.

OK.. updated ACE version on KH Community Repo **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively, as an easier method, you can click on this link to access both KH Repos directly from YAS -> Kelly's AddonSync Repos

ACE version is signed with the normal signature.

I've updated Panthera in our Community repo to version 2.61. **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively, as an easier method, you can click on this link to access both KH Repos directly from YAS -> Kelly's AddonSync Repos

I've added Jade to our Kellys Community YAS Repo. **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively, as an easier method, you can click on this link to access both KH Repos directly from YAS -> Kelly's AddonSync Repos Select Community Repo Note that the URLs above are case-sensitive so pls make sure you entered exactly as provided above.

Kellys ACE Server & YAS Repo updated to ACE b.353 **Kelly's Heroes ACE2 YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2ACE-Repository/ArmA2ACE-Repo.7z **Kelly's Heroes Community YAS AddonSync AutoConfig URL sponsored by Nat & Whisper http://www.kellys-heroes.eu/updater/ArmA2Community-Repository/ArmA2Community-Repo.7z Alternatively you can click on this link to access both Repos directly from YAS-> Kelly's AddonSync Repos Note that the URLs above are case-sensitive so pls make sure you entered exactly as provided above. YAS users: Do not forget to remove extra files through YAS. PS...had to do a re-update as the first one only updated to b352 probably due to an issue in one of the six updater mirrors.

Probably the mission you are using has viewdistance setting that overrides server's VD. Set works fine.